Community

Hi everyone. I purchased a 1-year student license for Mathcad Prime Version 11. I am having some issues launching the software and need to use my Product Code. However, I do not know where to find it. If someone could tell me where I can find the Product code for the edition of Mathcad that I have purchased, that would be much appreciated. When I purchased the license for Mathcad Prime 11, I received 3 confirmation emails, one of them having a Product Key, which began with MT. However, I was made aware that this is not, in fact, the actual Product Code. Please tell me where it is located. Thank you for your help.

Good day,How to construct a trigger rule for following usecase: Requirement State CHANGES from Published to InWork?I was able to construct a rule for a State[New] = InWork case. But for me Published->InWork and OtherState->InWork are not the same. My trigger should be invoked only for "Published->InWork" case and not for cases like "OtherState->InWork". How to achive this kind of "state transition management"?Thanks

I purchased the Mathcad Prime 11 Student version back in May, but i had issue with my Laptop Wi-Fi Network card, and now i am using a docking station with wired network. But my Mathcad is not working anymore, so i need to know how to re-generate a license with the correct host ID. I am being asked to find the product code but i am having hard time finding it... i need help please urgent ! any help is appreciated.

Version: Windchill Below 11.0 Use Case: Our old server that was running our Windchill database and vault is being decommissioned and will not be replaced. I need to get all of the CAD files out of it for historical reference. I no longer have access to any of the Windchill installers or old laptops that had this software installed on them.Description: My issue is very similar to this post:https://community.ptc.com/t5/Windchill/Export-all-CAD-from-Windchill-database/m-p/758411/highlight/true#M65150 However, I do not see any link to download the script that appeared to do exactly what I need. Does anyone have a copy of it? Or is there another way I can get the CAD out of the old server before it dies for good? I still have access to the old server, but I do not know for how much longer I will.

I am using Windchill PDMLink Release 11.1 and Datecode with CPS M020-CPS03Hi teamwe have to work on Intralink 11 migration so that we need Pro intralink 11 guide, rehost document and architecture document.would you provide us Pro intralink 11 guide, rehost document and architecture document.Regards,Dhareppa Madari

I am working on SSO SAML integration with Thingworx 9.3.4 using OKTA. and stuck with the below thingworx error apperating in Application log. Need advice on what might be the issue. I have double checked and validated the path, permission, password mentioned in KeyManagerSettings json parameter in sso-settings.json file. The error:WebApp starting...2025-09-19 13:31:13.071+0530 [L: INFO] [O: c.t.s.ThingWorxPersistenceHandler] [I: ] [U: SuperUser] [S: ] [P: ] [T: main] Default Persistence Provider Name = ThingworxPersistenceProvider2025-09-19 13:31:13.071+0530 [L: INFO] [O: c.t.s.ThingWorxPersistenceHandler] [I: ] [U: SuperUser] [S: ] [P: ] [T: main] Default Persistence Provider Package Name = PostgresPersistenceProviderPackage2025-09-19 13:31:13.076+0530 [L: INFO] [O: c.t.p.p.PostgresDatasource] [I: ] [U: SuperUser] [S: ] [P: ] [T: main] Reading configuration from configTableCol2025-09-19 13:31:13.230+0530 [L: INFO] [O: c.t.p.p.PostgresDatasource] [I: ] [U: Supe

Version: Windchill 12.0 Use Case: I need to fetch Task Comments for specific Wfprocess for CAPA or NC Objects, I have Object OID and WfProcess, currently I am trying to get info using following enpoint service however unable to see "Comments" value in the reponse \ Endpoint - > v5/CAPA/CAPAs('{CAPAId}')/WfProcess GET] v5/NC/Nonconformances('{NonconformanceId}')/WfProcess s Even tried using this expand query "WorkItem($expand=Owner)"Description: Need assistance with navigating to workItem TaskComments using above service endpoints  

Hi all, I'm trying to set the background of a grid filter to transparent (inherit).  I can change the background to a color by changing the top-bar and tools backgrounds in the grid's Style Properties, but setting those to "inherit" is not making the background transparent.  I can't find any other Style Properties to change so maybe I need custom CSS but I don't know how to do that in CSS.  Does anyone have an idea how to do this?  Hopefully the attached image helps show what I'm trying to do (I want the filter background to be transparent to show the overall background color). Thanks! 

What is the funtion for the section option, "Single Part Surface"? How do I reverse the command?

Folks, Curious if anyone has ever completed a Microsoft SQL to Oracle database migration for their Windchill implementation. I know there are lots of companies who have done the reverse migration but I cannot find anyone who has gone from SQL to Oracle. I have heard rumours of PTC customers who have transitioned from SQL to Oracle, but I am struggling to find anyone who has actually done it. Anyone have any information to share?

Hello everyone,I am working with Creo Flow Analysis on a model of a beaker filled with water (fluid domain). To close the volume, I created a capping surface at the fluid level.Now, I want to add a pipe as a second fluid domain that penetrates this capping surface and goes into the beaker. My idea is to define the upper circular face of the pipe as an inlet and define the lower circular face of the pipe (inside the water) as an outlet.The problem: Because the pipe passes through the capping surface, I cannot select the lower circular face of the pipe as an outlet in the Assistant.So my question is: What is the correct modeling approach in Creo Flow Analysis if I want to have a pipe fluid domain inside another fluid domain, with its upper face as inlet and its lower face as outlet? Thanks a lot for any advice!

Hello, I need to start out by saying Im new to Options modeler, trying to explore the possibilities. In my scenario, I am creating a configurable product of a Hydraulic cylinder. In this scenario I have some options like Bore size, port type, temperature range etc. Is it possible to suppress or un suppress certain features of one of the parts, for eg. the cylinder barrel can have different type of port feature based on the option selected. Additionally for option like temperature, I need to be able to switch the material of certain parts in the cylinder. Im exploring this since the permutations and combinations keep growing and my understanding is that you can only add or remove a part/sub-assembly in the final BOM. The current approach would involve having a CAD part for every Port configuration and different parts for every material which again is not promoting reuse.

i was given the free 30 days trial but i could not login successfully because i don't have a product code. Please can you email the product code to me?

Hi all,  I am currently participating inGet started with Creo Parametric ConceptsGet started with the Creo Parametric InterfaceGet Started with Creo Parametric ModelingGet Started with Creo Parametric Assemblyand am keen to make the most of the learning materials. I've noticed that I am currently unable to locate or download any supplementary resources that would be beneficial for practicing and reinforcing the course content (e.g., assembly parts, project templates). When I navigate through the platform, I haven't found clear access points or download links for these types of materials. Could you please provide guidance on where I can find and download these resources? I believe they would be very helpful for my learning process and for completing any associated exercises.

Hello, right now I have Creo with MDO and advance simulation. I have seen other threads using MDO for Drop test simulation. I was wondering if say I simulated the object dropping is there a way with my simulation to see the stresses/deformation present in the object after dropping.   Thank you

Please could someone assist me with the following error: Error states the value must be a function.  Not sure what I am doing wrong here. Variables b, n, As, and d are defined previously. 

Hi,I’m looking for some help with coding a script that can extract information (such as section type and associated loads) from an external source, like Excel, and import it into a developed Mathcad sheet. The goal is to check section capacity in accordance with the relevant codes and standards.I appreciate this request may be a bit broad, and I am aware some example codes exist here: Code Examples. However, as I’m new to this, I would greatly appreciate any guidance or assistance in streamlining the script.Kind regards,Iain Note, I am using Mathcad Prime 10.0.0.0  Edit:  We are looking to create Mathcad files based on an original worksheet, using externally sourced data from Excel.

I am using Windchill PDMLink Release 13.0 and Datecode with CPS 13.0.2.3I am generating a report of assigned tasks, but none of the tasks running in a sub-workflow (a workflow running inside another workflow) appear in the report. I am using the "Wf Assigned Activity" type in the report and it works for all other tasks in that workflow. The tasks in the sub-workflow are also assigned. If I use the "Wf Activity" type I can see those tasks in the report, but I get extraneous data and then can't get assigned user information that I need. Is there another relationship I need in Query Builder to get tasks in a sub-workflow?

Hello, I have MDO and advance simulation. I wanted to know if there is a way to do a drop-test simulation in Creo? I will be neeeding this to test a product that a customer is asking us to design. Any resource would be much appreciated. Thank you

I am using Windchill PDMLink Release 13.0 and Datecode with CPS 13.0.2.1In our dev environment we installed Eclipse per documentation in the customization guide. This reduced the number of MethodServers from 3 to just 1. How do we restore the other 2 method servers with eclipse still running?Here are the errors that I faced No error message. Before eclipse setup, we had 3 method servers. Post eclipse setup with the required additions in the wt.properties file we have just 1 and can't find a way to restore the other 2.

Hello, We recently started to encounter a problem with multiple entries of the same manufacturing part/assembly being automatically added/generated when using the BOM transformer. A large part of our sub assemblies and parts are standardized and also have linked standardized manufacturing parts. This means that when we create an MBOM from an EBOM which in it’s assembly structure contains some of these standardized sub-assemblies/parts the manufacturing version of these parts are automatically added inside the MBOM structure. This in itself is desirable since it saves allot of time having to manually add or create these manufacturing versions every time. However lately we have found that when generating an MBOM multiple instances of the same manufacturing parts are added which have the exact same version, name and quantity. The double entries can be removed manually but could potently lead to problems in orders if the person constructing the MBOM is not aware or payi

Hello! I notice that in the overhauled Review Hub UI, only usernames are shown in comments and when tagging people, rather than showing their full real name. This makes it very difficult to know who is actually commenting or finding the person you want to tag. Is it possible to somehow make this display the full name again?

I am looking to be able to develop cycle time metrics using version history and don't see any posts of people attempting to utilize this data that I know the system is capturing.  What I am looking to do it be able to pull the data from the version history of say a Risk and understand how long it was in any particular state. This would require me to evaluate, for example, the date it was created "New" and the date the status transition occurred to move to "Verified". Looking at the version history the dates are captured, but how to I get these into a report or data export so I can develop some metrics like, Average time per status, etc..  

We have dozens of older parts/drawings that were made before we found our footing with Creo... Now, whenever we open an older part/drawing and try to bring it up to snuff (adding shaft tolerances, using the block tolerance for what doesn't need to be explicit, etc.) someone has to make a note of all the existing tolerances because changing from ANSI to ISO changes all the explicitly set tolerances to the "standard".   I understand this might be useful to some people, some of the time - but am I really to understand that this "best of the best" software package isn't smart enough - or can't be configured - to leave what is explicitly set, well enough alone?

I noticed an issue with MCP11 vs 10 regarding Advanced Controls List Boxes where the selection is not preserved when a file is saved/closed/reopened. Anyone else seeing this issue?Without selection preservation, List Boxes are basically useless. I haven't yet checked if the other types (checkboxes, radio buttons, etc.) maintain selection.list box code (this worked in MCP10 w/o issue):// TODO: Add your initialization code here ListBox.ResetContent(); var list1 = Inputs[0].Value; var list2 = Inputs[1].Value; // Add Strings here as needed for (var i = 0; i < list2.length; i++) { ListBox.AddString(list2[i]); } function ListBoxEvent_Start(Inputs, Outputs) { // TODO: Add your code here }; function ListBoxEvent_Exec(Inputs, Outputs) { Outputs[0].Value = list1[ListBox.CurSel()]; }; function ListBoxEvent_Stop(Inputs, Outputs) { // TODO: Add your code here }; function ListBox_SelChanged(Inputs, Outputs) { // TODO: Add your code here }; function ListBox_DblClick(Input