Community

Reply to this post to ask for help or to share what you have learned in this course.

Hello,I'm using Mathcad Prime 11.I'm trying to solve a differential equation with conditional logic (if) due to the presence of a diode in the circuit.The input values are defined, and in the worksheet, some graphs are already plotted (e.g., I_TEST, VL1N). I'm using Odesolve to compute the solution. Is this the correct approach?It doesn't work with the following error "Plot failed"Cou you help me? Thank you very much

Good afternoon i'm using Creo parametric 11 with the intelligent fastner lite version.I would like to know if it possibile to modify or add some screw starting from the template for have my personal codification.Thank you for your time and help. 

Version: Windchill 12.1Organization> Type and Attribute Management > Manage Global enumerationUse Case: Hi everyone Does anyone know the API URL of Manage global enumerations or any other way to access it in API I'm using Workato and need to GET/POST to that list on Windchill Thank youDescription: Hi everyoneDoes anyone know the API URL of Manage global enumerations or any other way to access it in APII'm using Workato and need to GET/POST to that list on WindchillThank you

Version: Windchill 12.0 Use Case: Matrix with "double" result + calculation Matrix A = 1 Matrix B = 2 Matrix C = C1 with A manage by the horizontal axis + B manage by the vertical axis Calculation Matrix C : $Case( [FmeaTable.FmeUserText15] == "Yes" && [FmeaTable.FmeUserText19] == "Yes" , 1 , [FmeaTable.FmeUserText15] == "Yes" && [FmeaTable.FmeUserText20] == "Yes" , 1 , [FmeaTable.FmeUserText15] == "Yes" && [FmeaTable.FmeUserText21] == "Yes" , 1 , [FmeaTable.FmeUserText15] == "Yes" && [FmeaTable.FmeUserText23] == "Yes" , 1 , [FmeaTable.FmeUserText13] == "Yes" && [FmeaTable.FmeUserText19] == "Yes" , 1 , [FmeaTable.FmeUserText13] == "Yes" && [FmeaTable.FmeUserText20] == "Yes" , 1 , [FmeaTable.FmeUserText13] == "Yes" && [FmeaTable.FmeUserText21] == "Yes" , 1 , [FmeaTable.ItemDescription] == "Yes" && [FmeaTable.FmeUserText18] == "Yes" , 1 , [FmeaTable.ItemDescription] == "Yes" && [FmeaTable.FmeUserText21] == "Yes"

Hi ! Does anybody read tags from GE Quickpanel+ ?Which drivers we should use ? GE Ethernet ? What model ? PAC Systems ? We have downloaded runtime HMI project (Proficy Machine Edition 10) on GE Quickanel+ 755xxx. But we have no source project. We can read OPC tags from panel via Proficy View OPC server.  Used fromat is STATION IP\NameTagIs it possible to read tags via Kepserver OPC ?

I'm using Creo Distributed Batch to batch export DXF, but I found this tool will divide drawing sheet to single DXF file, how can I to export them as 1 DXF file ? My CREO version is 8.0.3.0

I am using CREO 12.4.0.0 , In the interface of CREO Installation Assistant , After following all the instructions and adding the simple license "BK800908EDSTUDENTEDUNI" and the id password the source is added and its status shows Not Suitable. what to do ?

Hello, I am a new user to Kepware, I setting up a flow of SQL data -> Kepware (querry to json) -> IoT gateway (REST server).Although the data in the OPC quick view look fine (attatch picture), the output from iot gateway contain un wanted character, how do I clean that ? { "readResults": [ { "id": "SQL2JSON.SQL2JSON.JsonData", "s": true, "r": "", "v": "[{\"id\": 1, \"pressure\": \"10\", \"temperature\": \"1\"}, {\"id\": 2, \"pressure\": \"190\", \"temperature\": \"1\"}, {\"id\": 3, \"pressure\": \"170\", \"temperature\": \"1\"}, {\"id\": 4, \"pressure\": \"0\", \"temperature\": \"0\"}, {\"id\": 5, \"pressure\": \"0\", \"temperature\": \"0\"}, {\"id\": 6, \"pressure\": \"118\", \"temperature\": \"70\"}, {\"id\": 7, \"pressure\": \"118\", \"temperature\": \"70\"}, {\"id\": 8, \"pressure\": \"118\", \"temperature\": \"70\"}, {\"id\": 9, \"pressure\": \"118\", \"temperature\": \"70\"}, {\"id\": 10, \"pressure\": \"118\", \"temperature\": \"70\"}, {\"id\": 11, \"pressure\":

I don't have a graphic calculator. I only have MathCAD 9.0.0.0. Is there a way to graph the following steps in MathCAD......or to solve for f another way. This is just an example problem. Once I learn how to do it, I can use it on my homework problem. Here's the full context of the example problem...Thanks,    Brent

Using the basic motor (DCPM) motor equation ...electrical and mechanical which have differential equations. I can solve the differential equations in a solve block. I want to create a sum squared error between the measured data and the model, and then using minerr to estimate the motor parameters. The measured data is Ia vs time and rotation speed vs time. But I cannot have two odesolve in one solve block. Can you help please... thanks. 

When using the View spaces option in Arbortext Editor 8.3 (set showspaces=on) non-breaking spaces now are displayed as "degree" symbols.  This is cool as it becomes possible to easily distinguish between regular spaces and non-breaks.  In Arbortext 5.4, nbsp didnt show anything when showspaces=on. However, this is a big problem when the user is writing a document filled with coordinates and directions. It is impossible to tell which degree symbols are real, and which are nbsp. Is there a secret way to change the symbol shown for nbsp when the view spaces feature is used? Eg. 4 of the following degree signs, are actually spaces.  I wish a tilda was used , I think the degree symbol was a poor choice.  

I am using Creo Parametric Release 4.0 and DatecodeM080Fatal Error :- Fatal Error Encountered. A Traceback has been written to C:\users\public\Documents\traceback.log Please send it to Technical Support.Here are the errors that I facedFatal Error Encountered. A Traceback has been written to C:\users\public\Documents\traceback.log Please send it to Technical Support.

Hi,I really need to raise this again because I honestly can't believe this is still the case. I’m fairly certain I mentioned it about two years ago, but I hadn’t run into it again until now – and I’m genuinely shocked.After completing an import, I receive an email notification. However, in order to view the associated warnings and failures, I’m required to upload the same REQIF file again just to access the report. This feels incredibly counterintuitive and inefficient.Is there any plan to improve this? It’s hard to understand why the system can’t directly link to the report from the import itself. Duration9:49.008minChangesTrackercreatedupdateddeletedfailures/warnings....712169015...831876018...0198800... 236262100 You can find more information about this ReqIF import, e.g. the configuration settings or individual item changes, byClicking on the Target Project link aboveGoing to Admin → General → Import → ReqIF sources …Clicking on the Source XXXXLocating and expanding

Check out this video on Creo Harness Assembly by Adam Manfredonia (Creo Solutions Consultant) and Tom Quaglia (Creo Solutions Consultant). 

Hi Team,Is there anyone knows how we can create custom OData rest service in Windchill, please share here if anyone have any solutions. Thanks in Advance.

I'm looking into utilizing the Universal Device Driver (UDD) for getting data from a REST API, however the API I need to communicate with is on a secure port requiring https.  I've found two articles that specifically say TLS is not currently supported by UDD:https://www.ptc.com/en/support/article/CS446447?source=searchhttps://www.ptc.com/en/support/article/CS442775?source=searchSince the UDD profile is user-defined, I'm still curious if there's a way to implement TLS into the connection via the Javascript profile.  Here are my questions I'm looking to get answered: Has anyone successfully implemented TLS/HTTPS calls via UDD?How does the back-end Script Engine make the calls to the remote host? Does the Script Engine use a particular library for the calls? Is TLS support on the UDD roadmap?

Hi Arbortext Community,I'm trying to secure PDF documents with an appcf file using the security element, but I want the user to be able to comment on the PDF. The issue is that, somehow even setting noAnnots="no", I keep having the Comment Creation as Not Allowed in the PDF protection menu.Does someone know how to solve this? Here my appcf file XML:   <?xml version="1.0" encoding="UTF-8"?><!--Arbortext, Inc., 1988-2023, v.4002--><!DOCTYPE APPConfig PUBLIC "-//Arbortext//DTD APPConfig 1.0//EN" "appconfig/appconfig.dtd"><APPConfig version="1.0" xmlns="http://www.arbortext.com/namespace/APP/APPPrinterConfig"><Print><PageConfig bleedAreaBottom="4mm" bleedAreaLeft="4mm" bleedAreaRight="4mm" bleedAreaTop="4mm" bleedString="" cuttingGuideOffset="1mm" cuttingGuideSize="9mm" cuttingGuides="inherit" registrationMarks="inherit"/><PDFPrinter><OutputRange endPage="-1" startPage="1"/><PDFMode color="document" defaultLanguage="" f

Our target is to generate a pressure tight cover, closing the end of a hole (cover fixed by e.g. a circlip), and pressure is acting on the inner side of the cover.    See Picture 1:The problem is, that as a result, the software cannot generate closed  walls / a pressure tight part / even if having a load at the middle.  we got only a simple result like this:  Could somebody provide solution possibility (what settings we have to consider) to achive closed (pressure tight) geometry?Thanks to all of you in advance.

Does anyone know the context argument (third argument) of ProParameterTableExport using the toolkit that match looking at an assembly's parameters using the filter "Current and all assembly features and components" in Creo Parametric 10.0.4.0?  I am having issues trying to get all of the parameters using PRO_PARAMTABLE_EXPORT_XML.

Getting ready for winter and getting ready for the holidays. A lot of the Christmas lights are up on the outside. The tree will go up Wednesday night. Any specials things that you do this time of the year that brings you together as a family or group of friends.       Computer scientists hunt elephants using algorithm A: 1.->Go to Africa 2.->Start at the Cape of Good Hope 3.->Work northward in an orderly manner, traversing the continent alternately east and west. 4.->During each traverse      a. Catch each animal seen      b. Compare each animal caught to a known elephant      c. Stop when a match is detected. (To Be Continued…)

I am using Mathcad Prime Release 10.0 and Datecode10.0.0.0"The license request failed. Requesting MathcadPrime" in the license field

Hi there Can you help to reach a graph merged to the classification I have I have this graph and I did a classification to the data in this graph ... what I need now is to merge the classification with the graph and make them obvious layers and then find the average in each layer like this By obvious layers I mean > a program wil be able to say from z1 to z50 >> it is a sand layer and the average Q in that layer is 10 MPa ( as an example) Is that possible ? Thank you in advance .. the sheet is attached  

Check out this video on Next Generation Model Based Definition with Creo and Windchill from PTC Application Engineers & TechAzul). Presenters: Mark Nielsen (TechAzul) and Tom Quaglia (Solution Consultant, Fellow)Original Date Presented: January 09, 2025  

Hello, I was wondering, is there a query, which as an sys admin I can use, to grant access to read or write the specific report for project role via interactive SQL? One of our employees is on a long absence and it is required to modify one of the reports, which results are shown in the project chart widget Thank you