SLM

So I was making changes to an existing stylesheet and noticed that a section's page number wasn't increasing any. The page number is set in the page set, But it seems to always be on 1 no matter how many pages there are for it. I find it weird because other sections page numbering is working as intended and as far I can tell These ones are set up in the same fashion.   These last two are from the same section, notably with the same page number even though they are separate pages.  

The issue we are seeing is that when we use svgs in editor everything is showing that was in the isodraw file. PTC support says that clippath element is ignored by IsoView. What do you do to your svgs to get them to clip properly in Editor, web and pdf output. We are currently using CGMS and they operate as expected. The image attached shows an extra arrow that is in the isodraw file (blue box), with the cgm the image cropped (Inner black box) to just show the image, where the svg shows shows everything. When the svg is viewed in a web browser it looks as expected also.   Thanks Bryon

So I was trying to add a cross reference to our TOC  to have it navigate somewhere else than the starting page of what the TOC is referencing. When I did, I see that it generated properly into the TOC, but when you click on it, it just goes to the first page of that section, like when you click anywhere on it. The 20-10-00.000 is the refint that generates the cross reference.  This is used elsewhere and does successfully jump to the referenced area.  However, in the TOC, it just goes to the first page instead.   I was thinking that perhaps it's just a quirk of TOC that the entire body of that line is treated as a link to that page. But I decided to try an external link and that does allow you to click on it separately and goes to the external link like it's supposed to.   I then tried to use an internal link under introduction, but that acts the same way as the refint did and ignores where it's marked  to go and instead goes to the 1st page.   

Elevating Service Experience for the New Normal Industry 4.0 led transformation is creating new opportunities for discrete manufacturers to drive growth, unlock new business models, and shape customer experiences. In the wake of pandemic driven disruption, services transformation is emerging as a key tenet of Industry 4.0, as manufacturers renew their focus on aftermarket services to leverage existing asset base to offset pressures and drive business growth. However, to deliver efficient and effective services across the product lifecycle, service organizations require simplified and seamless access to accurate, relevant, and real time service information. HCL and PTC’s Windchill SPII and Arbortext solutions enable service information digital thread to help organizations meet their aftermarket service goals. Join HCL & PTC experts in this webinar, as they  Identify key challenges experienced by service teams in creating, managing, and delivering service information Recom

Delete

Hi there,    I was wondering if it possible to add a link to both the first page and last page of a section.   Like for example, bellow has a has a section that starts on page 1 and ends at page 13. What we're wanting to have happen is when you click on the 1, you'll be sent to the 1st page of that section. Conversely, when you click on the 13, you'll be sent to the last page of that section.   I'm not sure if this functionality is possible, but if anyone has any clues on how it could be done I'd appreciate the assistance. 

Hello, With the ACL language, How to convert in a string the character entity "amp" to the real character "&"? I would like a function which converts all entities. David

I'm having issues importing a DWG into Isodraw 7.3. We are just looking at migrating off of 7.0 and of course looking at the latest version. First thing we tried was importing a DWG, which is a common task we do. This is the format our electrical schematics and controls drawings are done in. This is what the Autocad image looks like:When imported into Isodraw it looks like:I submitted a PTC ticket on this as well. But if anyone has seen this I'd love to hear from you.

I used the Table of Contents objects to build a Table of Contents for HTML Help. However, I can't seem to customize or format the Table of Contents object.  When I select the Add... button in the Customize Table of Contents window, there's even a note that changes will not effect my Table of Contents. So how can I customize my Table of Contents object for HTML Help?  I cannot use a basic formal block/title object model to create my Table of Contents. To start, I have to combine two elements to create a work package title - hardware name and maintenance action (like combining "Rear Wheel" with "Remove"). Thanks, -James

Hi All,need advise and help. We are trying publish WTdocument in Inservice. Currently we are creating documents as Documents and dynamic documents (dynamic documents using SIM). We are in process of publishing dynamic documents in Inservice now called arbortext content delivery.We also want to publish WTdocuments. we tried couple of examples by adding WTDocuments (Word documents )in Information structure and tried to publish it into the Inservice.following are the results:If WTdocuments have pdf has primary content then it get published Inservice as pdf.If WTdocuments have Word file has primary content then it no pdf is published Inservice. We see empty and there is no error message also.Please can advise on this. Thank you, Nishanth B E

What settings should I be using so SVG's that are exported from Isodraw maintain a certain size for pdf but are scalable for web. I have tried a fixed image size and that did not seem to work. I also tried setting the size to 100% and that did not work either.   Thanks   Bryon

For example: There are two identical bolts on the illustration. How to create callouts for them with the same number? Now,  each bolt has different number("1" and "2").

Sure would be nice if I could use my Isodraw over a remote desktop. Is this possible? Tells me my License request has failed.   Bryon

We are excited to be finally scheduling our first TC meeting in quite some time!    Please join us on June 24th from 9 to 10 am EST.   This is the tentative schedule at this time.   Welcome Member Brief  - If you would like to present this time please let me know and I will send you a template. (I would love everyone to have a turn at this.) Roll Call – Brief introduction by everyone on the call (What company, products used, one pain point) Request for feedback / PTC time Call for topics for the meeting Here is the registration link for the meeting. https://zoom.us/meeting/register/tJMlfumorD0pG9bNuCxOwcLAdT7qWK5nbAzi   If you are not yet a member of PTC/USER you can join here: https://portal.ptcuser.org/l/pw/rs  If you have not yet joined the TC you can join on this page after you have your PTC/USER login. https://portal.ptcuser.org/page/techincal-committees-(tcs)  

We have recently been upgraded to Windows 10. User is trying to create a pdf of a dita document (which he has done in the past). Since last week he gets the following error: ERROR: Failed to create input directory C:\Users\username\AppData\Local\Temp\e3comp\input5. FATAL ERROR: Operation Terminated. I realized that he did not have the e3comp folder. So initially I re-created the folder e3comp and this seemed to resolved the issue for a few days. He is now getting the same error again (as well as a few other users). Is it possible that something has changed on PE? If so, can someone provide some guidance as to how I can resolve this issue? Why is the e3comp folder deleted and why is it not being re-created?   Thanks  

https://www.youtube.com/watch?v=NKCc62631_Q&list=PLYsFUgTqqywgAshs_9xY4bLsaYXBCKT3R

We purchased the kit with a site license. Does anyone know how to procure licenses for multiple computers since it is a site license? I can't seem to get through to PTC licensing and when I do they are under the assumption that this is limited to one computer even though the licensing table states otherwise. Can anyone help?

Good morning, we are wanting to implement a way to shade alternate rows in a table. I found this article https://community.ptc.com/t5/Arbortext/alternate-row-shading/m-p/301668 but when I run the acl it gives me an error message A11369 Statement must be inside function definition: local   Here is the code from the link that I copied and pasted. What I am hoping is that I can have my cursor in a table and press a function key to cause the script to run.   local $loidCaret = oid_caret();# should be a <table>local $loidArrChildren[];local $i = 0;local $loid = oid_null();local $loidChild = oid_null();local $lintCellId = 0;local $loidCellFont = oid_null();local $lintRowId = 0;local $lintRowIndex = 0;oid_find_children($loidCaret, $loidArrChildren, 'entry', 0x04);for ($i = 1; $i <= count($loidArrChildren); $i++){$loid = $loidArrChildren[$i];# gets Cell Id$lintCellId = tbl_oid_cell($loid);# gets oid of cellfont pi, if any$loidCellFont = tbl_cell_fontpi($lintCellId,

I am currently downloading Isoview 7.3 to my laptop windows 10 pro, explorer 11 for My Boeing fleet   Installation was successful but somehow, the active x pop up does not come out in explorer.   Usually for PCs, pop up of active x saying 'allow PTC' but this time nothing happens.   Any solution? 

Good Afternoon,   I'm running Arbortext 7.1 M020 with FOSI stylesheets. I need to remove the hotlink from my glossary generated text, however I am unable to locate where the hotlink is set. The <stringdecl> has no hotlink set and none of the pseudo tags have it as well. Any help would be appreciated. <stringdecl textid="gloss.app" status="1">   Thanks in advance. Sarah

Are you familiar with the PTC/USER Technical Committees (TCs)?   PTC/USER, the independent voice for users of software created by PTC, will be hosting an online open house event this year after LiveWorx on June 10-11. These committees have been in operation for over 30 years! Each committee is composed of PTC customers from across industry who work directly with PTC Product Management to help improve the products. With the push toward virtualization, these groups are always looking to expand membership.   Please join us June 10th at 8 am EDT for the Technical Authoring, Management, and Delivery Committee Open House and find out what we are up to and how you can get involved!   Click here to register!

Good evening, just wondering if anyone is using a path to send the publish jobs to the APE and where I can find out more information about it. I like the idea of publishing to APE without tying up editor. When you go to the APE status screen, at the bottom it has a test APE section. If you click on the pdf test link, it creates a pdf. Just wondering how to read and understand the path. Can I define stylesheets used. Can I use profiling http://XXX.XXX.XXX.XXX:8080/e3/servlet/e3?file=$aptpath/e3/e3/e3demo.xml&type=postscript&f=convert   Thanks Bryon

When publishing a ditamap, Is there a way to have the profiling predefined for a ditamap? It would help our authors to not have to always select the correct profiles, when publishing. I believe it could also help in eliminating errors.   Thanks   Bryon

Hello, With an ACL function, is it possible to force the adding an attribute (and its value) to an element although the attribute is not declared in the reference schema ?My XML document will be not valid against the XSD Schema, but I would like to do it.   Kind regards David

I have used the object element to add few videos in a DITA file in Arbortext Editor 7.1, and set: data=<link to video>, outputclass=iframe. Refered Zoomin docs: https://docs.zoominsoftware.io/bundle/zoomin-configuration-guide/page/content_manage/t_embed_video.html When I publish the html5 output on our Doc Portal, all videos automatically play at the same time. Want to know how to disable the autoplay, and make the video run only when I select play.