Archive Read Only

Pro-SuperUsers,We just upgraded to Wildfire 2.0 from 2001, and we got a very basic colorpalette. Does anyone have a good color palette that they could send me?Thanks.Nick

A big Thank You to Steve Jones for reminding me that I need to take ALLthe spaces out of the file name and not all but one...e SPINE / NON-FUSIONJustin GiaquintoDraftsman/CAD Operator Tel: (610)719-5703 Fax: (610)719-5100 -

How do I control the layers of a component during the placement process??

I'm guessing that Marty is doing software QC for PTC. Why do I say so? Because of the number of times a requester/menu pops up a long distanceacross the screen from where the pointer was when I clicked the mousebutton. Mr. Feldman could have kept up with most of it, but I'm adon't liketo. I know that this occurs sometimes to prevent blocking the next pick,although... The best example today is Edit/References/Replace Ref. The Edit menu is upper left. The References selection is mid to lower left. The menu that appears is in the Upper Right, but the question it stops toask is in the screen lower left.The box to click Yes/No is at the lower right. All corners covered. All that's missing is a decent pop-under modal requester (1 pixel X 1 pixel,please ) and it would be complete. A chameleon could not watch all this at the same time, so I guess that thesoftware QC guys are more flexible than them - obviously more flexible thanme. I know, I know - create a mapkey to skip the whole thing.

Who has an involute gear as a UDF that follows the standard ANSI spline geometry. Found the http://www.ptc.com/cs/cs_25/howto/agf652/agf652.htm. But I never could get a UDF to work for inside or outside gear teeth. Best Regards,Mit freundlichen Grüßen,Saludos, Mitchell SmithProduct/Prototype DesignerZF Sachs Automotive of America15811 Centennial Dr., Northville, MI 48167Phone: 734.582.8062 Fax: 734.459.6491Main phone: 734.416.6200Mitchell.Smith@zf.com <blocked::mailto:mitchell.smith@zf.com>

Does anyone know of any publication that reviews any or all of the geom_checks and explains them?Dan SchurrCAD FacilitatorEATON Corporation13100 E. Michigan Ave.Galesburg, MI 49053tel: 269-342-3236fax: 269-746-6236-

Proe users,I need some help in creating a drill file.I'm using Proe2001.Brad

Did this ever get fixed in a WF2 build that anyone knows of?I'm using M080 and the icon seems to map to an old menu location.ThanksMike Singer

Here are a few solutions:Just slap a chamfer on the hole... (i.e., the "old school" way)

It seems that if you're not placing a standard hole,that to get a countersink, you have to go to a sketched hole.Is this true?ThanksMike

Hello, I'm looking for a post for a MAHO with Siemens Control. Thank in advance. Thank You, Dale HvizdoMachining Manager(321) 837-0500 ext 4317(321) 837-0501 Faxwww.shapesgroup.com <http: www.shapesgroup.com="/>

RE: [draft] Import ACAD 2000 DWGAs I suspected it was an operator error (akaID10T error). As all of you suggested the cause was space in the filename,i.e. in order for ProE to be able to read the file name there cannot be anyspaces in it, duh!Thanks to all who replied.Jack############################Users-I know it can be done, because I did it before, but now I cannot open anative AutoCAD DWG file in Wildfire. The file was created in ACAD 2004, butis saved as R14, yet when I go to File->Open, nothing shows up except forthe DWG I exported from ProE.Thanks for all your help.JackWildfire 2.0 M130

Users-I know it can be done, because I did it before, but now I cannot open a native AutoCAD DWG file in Wildfire. The file was created in ACAD 2004, but is saved as R14, yet when I go to File->Open, nothing shows up except for the DWG I exported from ProE.Thanks for all your help.JackWildfire 2.0 M130

I have no problem with PTC tech either. I always use web support and usually they call within an hour. I think there is a real advantage with web support. First of all your problem gets broadcast to allot of tec people and usually only someone who is familiar with it will call you back. Plus it gives them time to research it before they call you back. With phone support you are stuck with whoever is next on the line and they may not know anything about your particular problem so they tend to stumble around with you and end up having to call you back anyway.Gerald[Lanz, Gerald]

Thanks for your email.I am out of town until July 16th and will reply upon my return.Blessings!Paul Andrews

When using the PTC moldbase library, how do you edit relationsthat control the location of "hole" features?Thanks in advance.

Hi All,Yeah, that's what's happening! When he exits Pro/e all files except a trail file, a .out file and a .wav are deleted from his start-in directory.Anyone ever hear of such a thing?We tried both M120 and M130 of WFII.Funny thing is that it just all started doing this today!Dan SchurrCAD FacilitatorEATON Corporation13100 E. Michigan Ave.Galesburg, MI 49053tel: 269-342-3236fax: 269-746-6236-

Thanks for your email.I am out of town until July 16th and will reply upon my return.Blessings!Paul Andrews

Can anyone tell me how to measure the X,Y, and Z delta distances in WF-2? Whenever I attempt to measure a distance, the result is always skewed on an angle. I try projecting the result onto a plane, but sometimes the measurement line is along a compound angle. Thanks,Val

Thanks for your email.I am out of town until July 16th and will reply upon my return.Blessings!Paul Andrews

Thanks for your email.I am out of town until July 16th and will reply upon my return.Blessings!Paul Andrews

Thanks for your email.I am out of town until July 16th and will reply upon my return.Blessings!Paul Andrews

Thanks for your email.I am out of town until July 16th and will reply upon my return.Blessings!Paul Andrews