CAD

I have purchased a key for Mathcad for an employee at my company. I purchased it with my computer. I am trying to get it set up on his and cannot find a product key anywhere on my end. There are dozens of codes and numbers but none that are titled "product key." Additionally, all support videos seem to be for older iterations of the website and do not help. Similar problem with the knowledgebase articles. Any help on setting my coworker up with Mathcad 12.0.0.0 Prime would be much appreciated. I can provide proof of purchase if need be.

Reference to topic - In a prior version of Creo, I had a mapkey that would update the PRO_MP_MASS value of my top assembly by aggregating the lower level components. I still have the mapkey and it still runs, but I don’t remember the steps it uses. I suspect it is simply FILE > PREPARE > MODEL PROPERITES > CHANGE > GEOMETRY AND PARAMETERS > CALCULATE> OK. This parameter was shown in my model tree and I could monitor it throughout the design. My organization updated us to version 10 and this feature changed somehow and I don’t know how or why. Anyone know what changed to regress this very useful workflow I had going?

Hello,With my current employer there is some “masking” at times of our internal part numbers.This is because certain customers may require our part number be translated to match their numbering system.The issue is that we are expected to maintain universal/internal part numbers for our assemblies but then at times provide a customer the same assembly and drawing using only the customer’s part numbers.I am aware it is possible to have Table Formats for each customer having a column declaring the respective customer’s number from the properties of the item, but I hope that there is some way to maintain a single drawing and assembly for translation of the assembly and BoM to reflect a customer’s numbering system dynamically.This will remove possibility of duplicate items and entropy with that scenario.I assume it would be best for a BoM to be adjusted outside of Creo systems, but then the assemblies themselves they would not properly identify themselves via customer part numbering.Is ther

Attached are two images of my solve block.The example in screenshot 192200 does not work.  🥴  I am trying to define functions to be used in the equation to be solved.The example in screenshot 192321 DOES WORK.😀  I have explicitly put the functions into the equation to be solved.NOTE:  I cannot define the functions with the MATHCAD:= because I later use the solve block to compute a series of 𝛼 for a series of the parameters inside the Ans(….).Is my non working example simply not possible, or do I have some syntax or logic error? Thanks for any help.Reg  

ProblemWhen adding a decal to a surface, the decal is showing its transformation box, but no image is visible.Things that were tried:added the same decal to another surface on another part. added a different decal to the part that turns the decal invisible. creating a new figure from the base model.All of the above showed that it was the part within my sBoM that seemed to be the problem.SolutionA solution I found for my particular instance was the fact that I had 2 copies of the same part overlapping. Hiding one of the parts, revealed the decal. Both parts were named differently and were apart of an assembly. Which is why I didn’t catch it immediately. I’m aware that another solution to this problem is openGL drivers, due to older workstations and their graphics cards not playing nice, but only when decals are not showing up on all parts.I’m writing this up because I haven’t found this solution on the forum. I hope it can help someone in the future.

My group is trying to make a pointer annotation on a whole part inside of an assembly. Right now, only a specific feature on a part gets highlighted. Does anyone know how to highlight the entire part? I have attached a reference below.   

Team,I need to automate this for sequential integer values of n.Any ideas anyone?Thanks,Glen

Is anyone using Visual Studio Code for Toolkit development rather than full blown Visual Studio?If so I would like to know how you configured VScode to use the Visual Studio Build Tools. Thanks.

Hello,Yesterday I upgraded from Creo 9.0.8.0 to Creo 12.4.3.0 and noticed an annoyance with the “Open File” and “Assemble Component” commands.The problem is that Creo 12, unlike Creo 9, keeps the last selected setting in the filter “Type”. In Creo 9, however, the default value would be a generic setting (e.g. *.prt, *.asm, .....).My question is: is there a way to restore this behavior so that it works like in Creo 9?I tried searching for a setting in the configuration but couldn't find anything.The only workaround I can think of is to create a set of macros to open and assemble the ones that preset the generic filter (*.prt, *.asm, etc.).Does anyone know of a solution or have noticed the same problem?Thank you

I am trying to run a program out of smart assembly and it gets about 260 lines into it and just freezes. It looks like the xtop.exe has stopped working. Even leaving the file alone to run for a bit it never comes back and i have to “Kill” the program and open back everything up to model again. It doesn’t get me an error code to follow up with. This program has been working just fine up until the last 2-3 weeks. I have run other drawing type programs out of the same model assembly and they work just fine. I am Running Creo 10.0 with Smart Assembly 10. Could this be an update that would be messing with this? Also i have tried to create this in both Windchill and from my “C” drive and i get the same issue. I have had other people try to create and they have the same issue as well. 

I have a model that i am trying to create drawing from using a template. I am running it through Sigmxim’s Smart assembly to do a bunch of things. This program has worked plenty of times before this but in the last 3-4 weeks in locks up and the only thing that i can find is that the xtop.exe doesn’t want to work anymore. But when i run the same model though other Smart assembly programs it creates the drawings that those programs as supposed to do. I think i t has to do with trying to recall data from a excel file and fill in a table with that data but i am unsure. I have let Creo sit for 2 hours waiting for it to kick in but it never does. (sometimes if you wait it works again even though it says not responding). i’ve created other models and have had other people try and create the drawings as well though the Smart assembly function but they get the same results I do, It just permamently hangs up.

I want Mathcad Prime 11.0.1.0 to solve a simple exponential integral and it returns a limit towards infinity no matter what kind of assumptions I give it. A negative exponential should always go to 0 for x towards infinity when tau is real and positive.If instead I substitue manually a new variable x  the integral is solved correctly How can I convince Mathcad to do the same ?

Hi,I am looking for solution to setup custom Fasteners that i already have in windchill into IFX inside CREO, could anyone help me please?I have added an example below to elucidate the problem.1. Model tree of the custom Fasteners i already have in windchill database looks something like this. I want to be able to create a dat file that is accessible in Creo IFX which performs the normal functions, (like size selection based on Dia of Hole and length selection based on grip length, etc )  I am aware that i need to setup Catalog file and dat file for these custom fasteners. but not sure on how to be able to access the instances inside the family table of my custom fastener inside the dat file. The family table looks like this :  How do i map these inside the Dat file ? i.e.Please do let me know if additional information is needed.Thanks ! 

Creo 13 just dropped and is available for download. I have been talking about it for months. Now you can install it.New Creo AI Assistant New 3D PDF export Tabbed interface Major performance boosts and retrieval times Smarter pattern recognition and imported geometry handling Enhanced MBD and GD&T Advisor workflows Expanded composite design capabilities New simulation and manufacturing enhancements Improved ISDX and Freestyle surfacing tools Many usability, workflow, and productivity improvementsI will be hosting a webinar soon on the release, so stay tuned.

Can we able to develop a web-based drawing automation application using Creo J-Link & Java Toolkit, where end users can upload the 3D data to generate drawings in web based application without opening or interacting with Creo? The drawing generation process should run in the background,  and users should be able to upload models and receive the generated drawings through the web application interface.

hole_file_resolution use internal How do I updated old files so that any hole callout they are using is saved internally, without going back through every part and updating every hole callout? Up till now, cad files have not been saving .hol files internally.The .hol files have since been updated to include default_callout_format_data. (which allowed me to combine multiple files into one)So using the same file names on .hol callouts wont work, because I was able to reduce the total number required.The main issue, now when I go to put in a hole, there are multiple ‘Thread Type’ selections and half of them will be unused going forward.But if I remove them, old files will contain incomplete hole callouts due to the ‘hole_file_resolution use internal’ not being set when the part was created.Hiding the old .hol files so they can still be read but are not displayed would be acceptable as well, but I’m not seeing any options for that.Any suggestions on how to use the new .hol files without wa

Hi everyone,I am running a kinematic/position study in Creo Mechanism and trying to graph specific measures. However, several models in the assembly contain Mass Property analysis features.This is causing severe performance lags. Mechanism is regenerating every single one of these models at every frame of the analysis to recalculate mass and surface area, even though these values are static and won't change during the run.In the Analysis feature settings, the available Regenerate options are: Always Read Only Only Design Study Ideally, I want "Always, except during a Mechanism analysis."Has anyone else run into this performance bottleneck? What is the best workaround to temporarily bypass or freeze these mass property calculations while running and graphing a Mechanism study?Thanks in advance!

Hi, I’m looking to upgrade from Creo 11 to Creo 12. I noticed that when I launch Creo 12 my creo_parametric_customization.ui is not taken in account anymore.The help for Creo 12 says this :The load order is automatically defined as follows:1. Administrator Customization (if it exists at the loading point (What’s the loading point ?))2. User Customization (<Users>\AppData\Roaming\PTC\ProENGINEER\Wildfire\.wf\. Settings)3. Customization of the execution directory (if the value load_ui_customization_run_dir is set to yes) I have a file  creo_parametric_admin_customization.ui from my installation at this location : I have my personal file here : And I don’t have the parameter load_ui_customization_run_dir in my config.pro.When I load Creo, it loads with the default interface, why ?We are two users. I would to have a base customization for us two and let my colleague and me have it’s own customization as well. How can I achieve this ?

Hi,Would anyone know how to prevent Creo 10 from creating cap surfaces for tapped holes while using the Creo Parametric Hole feature?The surface shown in the image below is not the side wall of the thread but a cap surface at the top of the thread.  This makes you have to query select the hole which is an extra step when assembling parts to the tapped hole at the top-level assembly.Thanks for any help you can provide,Don A  

Hi there , I’m using mathcade prime 11I need to get the max values using max function regardless if there are positive or negative , how ever when I use [ I x I] I get different numbers , how can I get the max ? Thanks