Community

Reply to ask for help or share what you have learned.

Hello PetrH,   I have a similar requirement.  I have two Global attributes "Attribute_A" & "Attribute_B" on Drawing (EPMDocument), i want to make sure that when drawing is get published, this two attributes will be displayed in Title Block of Drawing.   Can you please help me here, how to achieve this ? any input will be helpful.   Thanks and Regards, Vivek      

Version: Windchill 13.1   Use Case: An identified administrative correction is needed (non form/fit/function) within the business confines of what is allowable. System needs to all an iteration of an object at its current end state. Description: What are other using for this situation? I have seen a few ways to do this from using a CR or a Peer Review or just a workflow on a document. In short, what I am looking at is a simple process with a few system checks at the start to make sure the proposed admin change is within the company business rules.  We have the workflow iterate the object and then when it moves forward we flip the lifecycle to a Single State lifecycle. That has an ad hoc permission for the assignee to modify at that state. At that step we add a comment to be displayed in the history table of the object. Once the task is completed we flap back to the Lifecycle called on the OIR and set the state back to the same state it was submitted. What we want to avoid is

Hi everyoneBasically I'm trying to log data into an SQL server, I get the correct tag value and tag name, but with the time I'm not able to see it correctly in SQL In SQL I have the column Time as data type: timestampand the data that logs is in hexadecimal, so is not what I wantI've actually use data type datetime2 as well in sql but then I get an error in Kepware (Error Data Logger Plug-in Unable to query recordset on Log Group 'loggroup'. Reason: Conversion failed when converting date and/or time from character string)You can see it in the snapshots    does anyone know how can I actually submit the time in the SQL server? or like what datatype should be in Kepware and SQL? please help 

I am looking for information on when CATIA MBD (PMI data) will be supported in Windchill. Any information on this topic is highly appreciated. 

I am switching from IDF to IDX soon and I don't understand the process of uploading files to Windchill after small electrical components have been added to the board from the ECAD side.  On a large board, there are bound to be several small components that are added during the ECAD Validation process. They are valuable to see in the mechanical 3D model because they help with interference checks, but they slow down assembly performance drastically.  Once I accept the components to be added to my assembly, is there a way that I can easily suppress them all so that I don't slow down my computer? Secondly, when I check-in the assembly to Windchill, it tries to check-in the small components as separate parts. Can I stop them from coming in as individual parts? If not, then how can I rename them before exporting them so that we don't run into issues with trying to check-in electrical components with the same name all the time?

Hi folks, I've built a pretty simple front panel and I'm trying to make a drawing out of it. When I placed the Front and Right view I noticed that it's showing me all the hidden lines, even though my Display mode is Shaded with Edges (I've triple checked this and I have also tried to change it to No Hidden, no luck). View Display for each view are set to Follow Environment and all Layer elements are hidden. I've even tried to manually hide them via Edge Display and that doesn't work either (doesn't hide anything, but Show Modified Edges does highlight my targeted lines). Lastly Force_wireframe_in_drawings is set to off,  I've looked around for previous topics and found no resolution, so here we are.I've attached an image of the drawing (front view and right view as Section) and the 3D model from the front and back view so you can see where the issue is appearing: the rear-of-panel-cut out is showing up in the front view and the side view is showing every c

Hi, Then I overwritten values for t1 and t2 and test variable result was updated with the new values of t1 and t2: Then I disabled t1 and t2, but the test variable remained unchanged. Why t1 and t2 did not took value 2 and update the test variable result with 4?  

Hello PTC CommunityI am using Creo Parametric Release 10.0 and Datecode10.0.8.0I need to get the simplified representation used as substitution of an item of a dedicated simplified representation of an assembly. So I'm using ProSimprepdataitemsVisit to get the items and filtering them on the action type. it works well with a new created simplified representation.After replacing the a component having a substitution by a component having also same replied representation name, it is not possible to get it : the previous component is still return as ProSimprepitem ( its item_path still have the previous CID).How to update the simplified representation item?

I am getting an error for license file does not support the version for Creo 12. I have reconfigure the installation still it is not working.

PTC software download does not have a download button for me. I have purchased Mathcad Prime Student Edition 11, but I cannot download it.

Hi Folks, I have a requirement to download the files of Windchill objects into Thingworx repository. I am getting the Link of files inside Thingworx using Odata Connectors. I am able to generate the file in Repository but when I try to open the file getting error "Failed to load PDF document." Below is the code I am using :// result: JSONlet inputJson = Things["ptc-windchill-integration-connector"].downloadAsZip({respondWithZip: false /* BOOLEAN {"dataShape":""} */,$expand: undefined /* STRING {"dataShape":""} */,    objectId: <objectId>}); // result: JSONlet csrf = Things["Thing.ODataConnector.ProdMgmt_TH"].GetCSRFToken({$select: undefined /* STRING {"dataShape":""} */});      item = inputJson.items[0];let params = {url: <file_url> /* STRING */ ,headers: {"CSRF_NONCE": <Nonce token>,                "Accept": "*/*",                "X-Requested-W

Hello All:  I have encountered some strange behavior with the new "vec()" function in Mathcad Prime 11.  An example of this is shown in the screen capture below.   In trying to plot a complex function (the volume of a sideways cylindrical tank), the old way with a "range" for the h in this example gives the correct results (determined independently of Mathcad). However, the h created by the vec() function yields very different results in this instance.  I tried other simpler formulas [e.g, sqrt(2*R*h-h2)] and the results were satisfactory and both results matched.  But as I started fleshing out the equation with more terms, the behavior diverged as per the example below.   The other terms, when isolated, produce satisfactory results.  Only the term shown below in V2(h) presents strange behavior.  More still, expressing V2(h) differently (e.g., algebraically rewriting the expression will create still different but, likewise, still w

I am a college student and I have been using MathCad for quite a while. My old license expired in October, and I am now in a class that requires MathCad 11, so I just purchased a student license for it. I have MathCad 10 on my computer, but not 11. When I went to download the image to get 11, it told me there were no products entitled to software updates. I do not want to activate the license on 10 because I need it to be compatible with 11. How to I download 11 onto my computer so I can activate the license?

I am a college student and I have been using MathCad for quite a while. My old license expired in October, and I am now in a class that requires MathCad 11, so I just purchased a student license for it. I have MathCad 10 on my computer, but not 11. When I went to download the image to get 11, it told me there were no products entitled to software updates. I do not want to activate the license on 10 because I need it to be compatible with 11. How to I download 11 onto my computer so I can activate the license?

I like the new (well, it's been a few years now) tools for Project and Offset. They're harder to teach, but they're more robust. But today I tried to use a seldom used command: Convert to Tapered. It used to be you can select an Offset geometry in the Sketcher and hit Operations->Convert to->Tapered, and then have the offset vary from one end to the other. Nice little trick. Well, it seems it doesn't work anymore? I tried getting it to work, but it's always greyed out. I searched through the documentation, and found this little note:  When you use the new tools for offsetting or projecting an edge the following functionality is not supported.• Projecting an axis.• Projecting or offsetting in the Blend tool.• Creating a Pattern of the type Curve.• Converting the new offset geometry to Tapered. Hm, I guess we got some new limitations with the new tools. But the fact that the option is still there (but greyed out) and the fact that the documentation says whe

I am using Windchill PDMLink Release 11.0 and Datecode with CPS M020-CPS02deleting the ghost entries from the databaseHere are the errors that I facedConflict Description:A referential integrity violation occurred for this operation:Cannot delete CAD Part - xxxx11111.prt because it is referenced by Assembly - 70000678726.asm, -.4A referential integrity violation occurred for this operation:Object "CAD Document Reference Link - wt.epm.structure.EPMReferenceLink:843001095" references the object "wt.epm.EPMDocumentMaster:843001052" that was removed from the system.Cannot check in place holder document CAD Part - xxxx11111.prt, -.1.A referential integrity violation occurred for this operation:Object "CAD Document Reference Link - wt.epm.structure.EPMReferenceLink:843001095" references the object "wt.epm.EPMDocumentMaster:843001052" that was removed from the system.

I am using Creo Parametric Release 10.0 and Datecode10.0.7.0just migrated from windows 10 to windows 11. We manage all mapkeys in config.proworked fine with creo 10 + windows 10most mapkeys are two letters. For exemple "RR" for right view. etc.All mapkeys do not work properly since windows 11 migration. First letter is recorded by creo 2nd letters is lost, we have to hit second letter again to make shortcut work Hence needs 3 hits for one mapkey...Most of our daily tasks are performed with mapkeys.We are over 20users trained with these mapkeys. We cannot change them. Please let us know what issue is and how to fix it

Include which software and version you are using!Creo Illustrate 12.1, but any other version missing it tooExplain what you already tried.I miss some of the CGM export profiles, compared to ISO DRAWDoes anybody else having same demand for e.g. S1000D in Creo IllustrateInclude a screenshot Compare Iso Draw 7.4 vs. Creo Illustrate 12.1 Help centerAll not marked missing, especially the S1000D is my demand

Greetings Codebeamer Community,I am currently a Codebeamer administrator with limited coding experience. I would like to learn how to automate tasks in Codebeamer using the REST API and how to develop custom plugins. Could you please provide guidance on where to start, which topics or skills I should focus on, and any resources or best practices for a beginner in this area?

Version: Windchill 12.1 Use Case: I use this URL to get Info on the Reporesenation attached to the wtPart and the attached CAD Docs: https:///Windchill/servlet/odata/v7/ProdMgmt/Parts('<wtpart_id')?%24select=Name%2CNumber&%24expand=PartDocAssociations(%24expand%3DRelatedCADDoc(%24select%3DNumber%2CName%2CCategory%3B%24expand%3DRepresentations))%2CRepresentations.Description: I use this URL to get Info on the Reporesenation attached to the wtPart and the attached CAD Docs: https://<Windchill URL>/Windchill/servlet/odata/v7/ProdMgmt/Parts('<wtpart_id')?%24select=Name%2CNumber&%24expand=PartDocAssociations(%24expand%3DRelatedCADDoc(%24select%3DNumber%2CName%2CCategory%3B%24expand%3DRepresentations))%2CRepresentations. What I am missing is the Information from the Details column in the Representationn/Annotations table on the Part Information Page. (see attached picture) Is there a other Rest Service API to get the information (Positioning Assembly / EPM only

I am using Windchill PDMLink Release 11.0 and Datecode with CPS M030-CPS16工作流程的会签节点的路由选择驳回时，要必填备注意见

when i call ProEngineerStart，tips:Cannot register service with portmapper: RPC: Unable to send; errno = 10057

Hi   reference topic: Solved: reloading Mathcad in new windows 11 computer - PTC Community I'm upgrading machines to win 11 and trying to re-install prime 3.0 on those machines with a new correct licence file. Installs but cant apply licence.   Machines with Mathcad already on when upgraded to 11 work fine.   Any feedback welcome.  We have perpetual licence.

I am using Creo Parametric Release 9.0 and Datecode9.0.11.0When I import a tiff image in my DRW the created dimensions, notes, and symbols appear above the image, while sketch entities appear below, so I have to increase the image's transparency to manage them.I there a command for put under the image?