Question
Drill cycle XY position post tweak
Hi all,
Can anyone tell me how to move the xy values on G8# drilling cycles to the
following line. Below is what I am getting and what I need. Currently, I
have to cut and paste the xy value from the G83 line to the following line.
What I get.
N1788 G0 X8. Y8.
N1790 Z.1
N1792 G83 X8. Y8. Z-.9127 I.25 F30. R.1 P.1
N1794 X-8.
N1796 Y-8.
N1798 X8.
N1800 G80
What I need.
N1788 G0 X8. Y8.
N1790 Z.1
N1792 G83 Z-.9127 I.25 F30. R.1 P.1
N1794 X8. Y8.
N1796 X-8.
N1798 Y-8.
N1800 X8.
N1802 G80
This is the case for all of the G80 series drilling cycles
Thanks in advance,
Roger Doyle
Sr. Designer
Pure Fishing USA
1900 18th Street
Spirit Lake, IA 51360
Can anyone tell me how to move the xy values on G8# drilling cycles to the
following line. Below is what I am getting and what I need. Currently, I
have to cut and paste the xy value from the G83 line to the following line.
What I get.
N1788 G0 X8. Y8.
N1790 Z.1
N1792 G83 X8. Y8. Z-.9127 I.25 F30. R.1 P.1
N1794 X-8.
N1796 Y-8.
N1798 X8.
N1800 G80
What I need.
N1788 G0 X8. Y8.
N1790 Z.1
N1792 G83 Z-.9127 I.25 F30. R.1 P.1
N1794 X8. Y8.
N1796 X-8.
N1798 Y-8.
N1800 X8.
N1802 G80
This is the case for all of the G80 series drilling cycles
Thanks in advance,
Roger Doyle
Sr. Designer
Pure Fishing USA
1900 18th Street
Spirit Lake, IA 51360