Other Creo Products (Sketch/Layout/Schematics and Creo Direct)

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0您好PTC 我想请问下在Creo Schematics中可变接插件的entry_port的值无法像name值一样自动根据序号更新名称(如：默认名称为Pin_#,序号为 1，自动更新后的名称为Pin_1)，请问有什么方法解决这个问题如果有解决方案请电话:15527705829联系加工或者邮箱：15071650294@139.com   Translated by the moderation using Google Translate----------------------------------------------------------------------------------------------- Hello PTC, I would like to ask about the entry_port value of the variable connector in Creo Schematics. It cannot automatically update the name according to the serial number like the name value (for example: the default name is Pin_#, the serial number is 1, and the automatically updated name is Pin_1) , is there any way to solve this problem?

Does anyone know if there is a way to get a report to show only when a "Total" is greater than 1. I have a report setup for our user that gets generated when they do checkin to windchill. This report pops up showing all the Harnesses in the Design. The intent being to check that each harness has only a quantity of 1, If any harness is a quantity of 2 or more that is an issue since the harnesses are labeled with that harness name. Users many times do not look at the report since there can be multiple pages of harnesses in complex designs. An alternate thought might be is there a way to limit specific datasets to being applied only once? Since in order to get 2 harnesses, the design has the same dataset applied twice (to 2 different cables). Attaching my report for reference.

there is no documentation on this.   i would like to see a number at the connector level adding up all the connection_count in the port level.  

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0There is an issue we are facing during PDF export from CS 7.0 compared to previous version CS 3.0 (used before CS 7.0) as mentioned. (i) The exported PDF from CS 7.0 and open in Adobe Illustrator for edit text properties is automatically changing the TEXT format into DARFT format. Please refer attachment for more details. (ii) The exported PDF from CS 7.0 (15MB) file size is 3 to 5 times larger than CS 3.0 (3MB). We just wonder why this drastic file size difference from older to newer versions. Sometime, it is taking more than 5 minutes to create the PDF file on CS 7.0. We used to color the circuit/wire name based on the functionality in Adobe Illustrator (AI). For formatting in Adobe Illustrator (AI), we use the PDF file exported from the RSD file saved from Creo Schematics. We do not face any issues in the older version of Creo Schematics (CS 3.0). After we deployed CS 7.0, the exported PDF file is selectable as a "TEXT (singl

I was using the "Check Pin Numbers" tool while verifying my BID-WID diagrams, and I noticed that every one of my components has one extra pin (according to the tool, anyway).  All of these components are made with a variable group connector and datatables, and each one only shows 6 pins. I've checked their properties, tried selecting children, and using the reorder members tool to make sure none were hidden or disabled.  The only thing I can think of is that Schematics is counting the Block Port as an additional pin on each component. I don't think this will stop me from exporting but it is a bit confusing.  Should I just ignore it, or is there an easy fix? 

There is an issue we are facing during PDF export from CS 7.0 compared to previous version CS 3.0 (used before CS 7.0) as mentioned below. The exported PDF from CS 7.0 (15MB) file size is 3 to 5 times larger than CS 3.0 (3MB). We just wonder why this drastic file size difference from older to newer versions. Sometime, it is taking more than 5 minutes to create the PDF file on CS 7.0.The exported PDF from CS 7.0 and open in Adobe Illustrator for edit text properties is automatically changing the TEXT format into DARFT format. Please refer attachment for more details.

When i set up my old design to call the central catalog i get a bunch of errors wanting to rename datatables.  I would rather them use the datatables from the central catalog.   How can this be avoided?   Ive updated the datatables manually in the design to what i put in the central catalog but i still see that it's throwing an error as a duplicate.  I would like a streamlined import.   are there other toggles i can do to streamline the datatables.   If we are forced to rename them can PTC give us a way to rename them all quickly with a formula (similar to renaming in a Creo assy)

When i created my own Template file with ".rsd" & ".rsdt" file. When i create any new connector/variable connector symbol and send it to temporary submission folder and update the same in central catalogue by copy and paste.I cannot edit/delete the same symbol neither in .RSD file or .RSDT file. am i doing the wrong move to update the same symbol which i created in template file ? or i should directly delete the symbol from the central catalogue folder ? when i tried to delete the same symbol in template file am getting the following note in below dialogue box " Cannot edit shape for central catalog item".Please guide me how do i update the symbols in template file after i submit them to central catalogue location.

Hi Everyone,Good Evening, Can anyone tell me how to increase resolution of image in Creo Illustrate 9.1& what is the maximum resolution of image can we achieved from Creo Illustrate 9.1 Thanks in Advance. Regards,Aditya Gupta.

We also discussed this topic during last RSD Tech community meeting, We need connector MATE TO information from the Creo schematics. This will help us on wire tracing during troubleshooting purpose. Please see attached doc for more detail. Appreciated if anyone has any thoughts. Thanks

We are upgrading to Creo 10.0.X and looking to adopt the 2018 standard, does the GD&T product support this version? If so where can I find that information.   Thanks.

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0Needing to update the schematics catalog and need someone to help walk me through the process

I've been having an intermittent issue when applying datasets to objects in Schematics. I have my own datatable for connectors and have used this datatable in the past (as recently as yesterday) to apply datasets to objects in Schematics, but yesterday when I tried to set an objects dataset, I got the error:   ?msg_err@ >>>> error <<<<?msg_err@ Can not apply this dataset: at least 1 member is invalid: W501-P5!BP1 (No mapping)   The object is the "Plug" variable object included in the DemoDB and I'm having the issue in both block (BID) and wiring (WID) sheets... The weirdest part is that I have successfully applied the dataset to other Plug objects on the same sheet, but now I just get this error. I've started blank sheets and sometimes the same error crops up, and sometimes it doesn't (and sometimes it will work for a little bit and then stop working...).   Any ideas how to get around this?

Greetings, I am interested in trying to utilize more of the functionality of Schematics rather than just creating wire diagrams.Ultimately I'd love to be able to create a BID, and then create a CID (using the info on the BID), then create a WID. Does anyone actively do this?Would you be willing to share your process? Thank you.

Can I easily switch between the Lite and the Full versions? The end users want to be able to use both for a while

Hi all,I am trying to make a new symbol. I would like for this symbol to just be a note with pop up boxes for the information needed. A pop up box like this: Is there anyway to get this into a symbol note? I don't want it to be a parameter. Just simply a box to type in what is needed. Thank you

I would like to do two things with Java API.1.Can I automatically assign color to the wire (Fiber) using the property color?2. For unconnected pins, the Connection point is set to 0, but the term name is the part name that we have assigned in the CSV files. Can You say with Java API when connection point is set to 0 that it takes term name Empty?

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0I have converted the Creo Schematics Lite to Creo Schematics Full version.This works well until I want to link an old design to the catalog.By the way the items that are mentioned are not on the design.I worked in the past with the central Library and a Template.

I have converted the Creo Schematics Lite to Creo Schematics Full version.This works well until I want to link an old design to the catalog.I get the following report and can't solve it. Who can help me solve this?By the way the items that are mentioned are not fysical on the design. I workes in the past with the central Library and a Template. 

I am using Creo Schematics Release N/A and DatecodeN/AUsing Creo Schematics 9.0 and Creo Parametric 9.0Is there an electrical component library available to download from PTC for use with Creo Schematics 9.0 and Creo Parametric/Cabling 9.0?

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0In Creo Schematics, when exporting sheets to PDF format and printing directly, all the labels are thin and non-arial bold. I'm Using default font called "font". Just upgraded from Creo 4.0 to Creo 7.0 and the thickness and font type that they export are different. In Creo 4.0 all text labels are Arial Font and bolded depending on label which is what I want. When I moved to Creo 7.0 all text labels are thin and in non-arial font no matter if you export PDF or Print Directly. Is there a configuration that I am missing? From what I have investigated myself all of the settings seem to be the same. Thanks

Need support How to migrate Creo Diagram template and Symbol library to Creo Schematic?   

Hello,  I have an existing P&ID drawing created in Creo Schematics, and it has a BOM table as shown in the attached Image1.png file. I am trying to update this table to change certain information on it. When I tried to right-click this table, and select Properties, I get an error message as shown in the attached Image2.png file. Is there a way to fix this issue?  

When adding a new sheet to a schematic I am prompted to select a template from the Design Templates section of the Catalog Explorer. I am currently trying to see if there is a way to load my .RSDT template that I use when I initially create a schematic into this part of the catalog, since having to edit my main design template and the template for additional sheets is cumbersome. As of right now it seems like you have to manually create and edit new sheet templates in the Creo Schematics catalog, similar to editing artifact's, and there is no option to import or load a template from an existing .RSDT file. I have looked through my central catalog in file explorer and it does not look like there is a file or folder designated for design templates. Prompt to select a template when adding a new sheet to an existing schematic: Prompt to select a template when creating a new schematic: Is there a way to load new templates into the design template section of the catalog? Or do

Is Creo Sketch, the free sketching app still available? The download link that I know does not work: https://support.ptc.com/products/creo/sketch/download.htm   Thanks in advance Jörg