SLM

While ago I installed AE 5.2 and couple of weeks ago I installed 6.0 M010and been developing or maturing it. Yesterday, I uninstalled 5.2 and now Iam getting this message: <#ipbBrk2nomen.pl>

I'm relatively new to IsoDraw. I'm running 7.1 CADprocess M040. I have a lot of legacy data (files that were created using AutoCAD and other formats) that I want to bring over to IsoDraw. Every time I attempt to import an AutoCAD file into IsoDraw it comes in with all the lines changed to dashed lines and I have to redefine line types. Is there a setting in the preferences that needs to be set? Or do I need to save my AutoCAD drawings down to a earlier release?

In IsoDraw the Template size which I use is Width = 183.5 & Height = 227. I illustrate only inside the template.But when I export the Illustration to CGM the width and height of the illustration increased.If the Width and Height is less then it is not a problem for me.But in most of the cases the size is higher then the template size.I found this problem rises due to the partial ellipse which are created during illustration.When the center point of the partial ellipse lies out side the template area the cgm size increases.So I created a macro to select the ellipse whose center point is outside the template and convert it to Bezier.But still the error occurs.Then I found that even when the elliptical profile is outside the template(When selecting the partial ellipse and press F12) the size of the cgm increases.I have attached an image through which you can understand my problem.I want to select these ellipse whose profile and convert it into Bezier path.Help me out in solving the pr

Hi,Have any of you seen an established Publishing Engine "lose" its integrationwith Tomcat?We had an incident recently when a stable, long running Publishing Engineimplementation (5.3 m110 to give you the "vintage" of this server), sufferedan outage that left it crippled at the application level. The serverresponded to ping but we could not make Remote Desktop connections, Tomcatwas unresponsive, and, of course, PE and Dynamic Link Manager wereunavailable.Support restored Windows services (I think by rebooting, but I'm stillwaiting for them to confirm that's the action they took) and Tomcat.Publishing Engine (and DLM), however, did not come back. After a few minutesof plunking around, I realized that Publishing Engine had "lost" it's Tomcatintegration. I reestablished the integration through the PE Configapplication and everything returned to normal.I did some research into errors I found in the Windows Events logs and therewas a loose suggestion that the errors I was seeing could be t

Friends and co-workers:**** **As some of you know that I cycle and Northrop Grumman is paying my entry feeto enter the Cool Breeze Century (100 miles) in Ventura. In return, theywant me to raise at least $1,000 for the Leukemia and Lymphoma Society. Iwill be pedaling my 100 miles on August 20th. I am asking for you to supportthis cause and help me.** **I have a friend Craig from High School that just contacted me about his 18year daughter, Hannah that is undergoing treatment for Leukemia today, I donot need to tell you that cancer touches everyone, but this will help fightthat disease. **** **How you can help, think about financially donating any amount to this greatcause. Go to:

Has anyone had any luck embedding the ActiveX Editor Control within anotherapplication?According to PTC support, from 5.4 on, there is an available ActiveX controlthat can be used. They even embed it within Arbortext itself as a fontpreview (see: lib\dialogs\modifyfont.xml)<activex disabled="true" height="80"<br"/>id="editor" progid="Arbortext.EditorControl" resize="both" width="385">Dtl?></activex>Pretty cool to say the least if I can get it to work, since our writers arevery familiar with the way the editor behaves, but are also dependent uponexternal tools. Embedding it would allow me to keep the authoringenvironment within a separate toolset context.Given that we are a Seattle company, I've mainly been trying to do thiswithin a .NET GUI through COM interop, but I'm curious if anyone's triedthis from any other language/platform (C++, Java, etc).Keith BerardMilliman Care Guidelines

At what point in time do you think we will be able to convert the isodraw animations to avi, mov, wmv etc. for embedding in PDFs and websites. That would be awesome for our documentation manuals on the web. Thanks, Jim

Hello Can anybody tell me how I can change the IsoDraw License to another computer, since I haven a new PC en want to put IsoDraw onto that one. Kind regards Paul Braas

I know the spellcheck improved after 5.1, and can detect when there aremissing spaces between elements. Is there a way (e.g., editing .dcf) to turnoff that boundary around the element <brk> check. I do not want to addspaces near the <brk> tag, but I do not like it looking like the wordsaround the <brk> tag are misspelled.d

I am currently using Epic 5.1 with Print Composer used as my documentcomposer. I will be forced to upgrade soon due to computer upgrades. Ihave a maintenance contract for all of the S/W and licenses that I use. Idon't see Print Composer in the Download area. Does anyone know if I needto purchase new print composing software to support the change. John T. GrovesW R Systems, LTD.2500 Almeda AveSuite 214Norfolk, VA 23513-2403Ph. 757.858.6000 ext 442email: jgroves@wrsystems.comBut a Constitution of Government once changed from Freedom, can never berestored. Liberty, once lost, is lost forever.<john adams=" 1775=">

I have just upgraded to Arbortext 6.0 M010. When publishing a PDF file I have notice that my what was once a 6 mb file has increased to a 30 mb file.We publish using distiller not PE Server or the Direct to PDF built in method.Anyone elsehad this problem?Thanks in advance.Sarah

PTC University's LearningExchange is continually adding new FREE tutorials - check out the latest Arbotext 6.0 tutorial on Useful Preference Settings http://bit.ly/kpdUoc, We would love to hear what you think and what type of content you're looking for. Any thoughts?

Hi,We are just getting our Arbortext CMS set up, and I am trying to figure out how to create a "sandbox" for learning & testing in the CMS. Would I create a separate "Organization" in the site? Thanks

Good Morning All,I was wondering if there was any way to display information coded as generated text in a text file. The issue is we have a customer who is making up their own rules for cross-referencing and we need to see what they have coded in their FOSI to produce their end results.Sindy YoungAWACS Tools and Technology Team,(253) 657-6964Kent, WA 98032

i am very new to macro in iso draw. can i get any training material to write macro

I'm getting bogged down trying to do something simple.I'm trying to draw items in a macro, some in "No Pen", some with "Thick" lines and some with white fillI'm using rectangle, but am having problems both setting the fill type (can't see how this is set) and in getting the pen type to work.The example below is the simplest way I can show the problem pen problem.macro testrectangle Set active pen "No Pen" create rectangle 9 9 9 19 19 19 19 9 Set active pen "Thick" create rectangle 10 10 10 20 20 20 20 10 end macroWhat I think it should do is draw 1 rectangle in "No Pen" and the 2nd rectangle in "Thick", but what it does is draw both rectangles in thick and thin.Do rectangles work differently to lines - can't you set the linetype and fill for them in a macro?

Does the "oid_attr(oid, attrname)" ACL function return the DTD's "default" value for an attribute if that attribute is not present on the specified "oid" tag? The "help center" entry I have (5.4 M070) for this function does not specify this behavior. An issue I'm tracking down hints that it does, but I could swear I sawpreviously that it does not do this.In any case, I'm curious to know if this behavior is what most users of this API would want, or expect.

Hello, we want to use pseudo-attributes in XML as we use in SGML (declared in atiattr.cf file).But we don't know how to use it.Anybod can help us with this topic?Thanks in advance.

We are using isodraw 7.2 and arbortext 5.4 m080.We are creating the illustrations in isodraw, starting with a JT file and ending with a CGM. We are putting the illustration into a custom sized template page where we have some arrows and callouts already there. Placed outside the hatched area. In arbortext, we link to the illustration and it showed up correctly, masked to hatched area. When I would print to pdf everything looked correct, illustrations were masked to hatch pattern. The output worked fine until the consultants we have working with us, suggested we add cgm under the preferences, advanced prefeances, isoviewfileformats. Now it when we open arbortext we get no illustrations. The link is there, the size of the white space is correct, but nothing shows up. We then open one of the illustrations that does not show up in arbortext and move it off the background layer to a new layer, which we have caleld raster. Now it shows up in arbortext, and you can now see the illustration. W

I'm editing a document using Arbortext 5.4, CPA 1.6. Trying to delete a new column command that was probably input with Format-Touch Up and keep getting a message: "Cannot allow a change where neither CPA change markup nor change attributes are allowed."How do I get rid of this command?

Hi All,I guess this quesiton is pretty basic but it is keeping me busy. I want to compose a pdf from the system command line in batch mode.I can call Arbortex Editor from a batch file, loading the correct document and stylesheet. Then all I want is to compose to pdf (with document's name, using stylesheet I have loaded). In the manual they talk of using -c "print" startup command option. I could do this and direct it to a pdf printer but that seems to be a bit of a workaround. I have also seen compose::compose_pdf_macro(), this is not really ideal as there are a lot of files that we need to update, I would rather that it happen wihtout user input. Also, where do I find documentaition on these commands?Thasnk for your help,Mark

I have a few macros that add infos to objects to aid selecting them later in the macro.At the end of the macro, I use the DELETE OBJECT_INFO DEEP command to remove these infos so the items changed in the macro are not changed again next time the macro is run on a different part of a drawing.Trouble is, that the DELETE OBJECT_INFO DEEP command removes all infos on everything, meaning that infos cannot become permanent parts of drawing objects.I would like to be able to be able to have infos (for existence part numbers) attached to drawn items so that you can run macros to select them later, but to do this I would have to start removing specific infos, leaving on the ones that are meant to be permanent.Is there a way to do this?

Hey folks, I'm working at getting my MIL-HDBK put to bed and my boss asked me to get the bookmarks (the left frame that is a TOC) working. I read up on this a bit in the 'help center' and the implication I get is that I need to have the publishing engine (not the print app) in order to do this.I am using a FOSI to produce my output with Epic 5.4 (still haven't loaded 6.0 on the machine with the print license). So any input on this would be greatly appreciated. Thanks.Lynn

Hello all,We are working on implementing PDMLink 9.1 with Arbortext here and I have a question.When you use the built-in object browser within Editor, the structure displayed follows the document structure.[cid:image002.png@01CC47B6.3481BF00]When you use the display the structure within PDMLink browser I can't seem to find the way to sort the same way. It seems to only want to sort numerically and not base on document structure.[cid:image005.jpg@01CC47B6.34971BC0]Does anyone know how to sort by document structure within PDMLink.Thanks in advance,BrianBrian York-<">mailto:->Exmark Mfg. Co.[The Next Lazer]

Hello Everyone,I work on Epic 5.4 and I am a beginner, I want to open local file programmatically with the ACL functions.I want to know if anyone has an example of this kind.I would be RECOGNIZING if someone can help me cordially