3.0 to 2.0
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Notify Moderator
3.0 to 2.0
How can I open a file created in Creo 3.0 on a machine with Creo 2.0?
This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Solved! Go to Solution.
- Labels:
-
General
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Notify Moderator
Matt,
use GRANITEĀ®-Based Cross-Release Interoperability (GCRI) Functionality Implemented Starting in Pro/ENGINEER Wildfire 3.0. (see https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS34964).
Follow the 2 steps below:
- Copy the readnewermodels.dll file from the upper version folder
- For Creo Parametric 3.0
- Copy readnewermodels.dll from <Creo load point>\<datecode>\Common Files\<machine_type>\gcri
- For Creo Parametric 3.0
- Paste the readnewermodels.dll file to the lower version in the following folder
- For Creo Parametric 2.0
- Put the readnewermodels.dll into <Creo load point>\common files\<datecodes>\<machine_type>\obj\
- For Creo Parametric 2.0
Now you can start CR2 and open CR3 file.
LIMITATION: You will not see feature history !!!
Good luck
Martin Hanak
Martin HanƔk
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Notify Moderator
Welcome to the forum, Matt.
Technically, you cannot. You can export the file as STEP and open it in Creo 2.0 but I know that is not what you are after. There is a utility called Granite that can do this but the file will be compromised from the original parametric point of view.
If there is a critical need, you might ask customer support to give you a hand on this. But in general, you cannot do this if you want all your features transferred intact.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Notify Moderator
Matt,
use GRANITEĀ®-Based Cross-Release Interoperability (GCRI) Functionality Implemented Starting in Pro/ENGINEER Wildfire 3.0. (see https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS34964).
Follow the 2 steps below:
- Copy the readnewermodels.dll file from the upper version folder
- For Creo Parametric 3.0
- Copy readnewermodels.dll from <Creo load point>\<datecode>\Common Files\<machine_type>\gcri
- For Creo Parametric 3.0
- Paste the readnewermodels.dll file to the lower version in the following folder
- For Creo Parametric 2.0
- Put the readnewermodels.dll into <Creo load point>\common files\<datecodes>\<machine_type>\obj\
- For Creo Parametric 2.0
Now you can start CR2 and open CR3 file.
LIMITATION: You will not see feature history !!!
Good luck
Martin Hanak
Martin HanƔk