Skip to main content
S
Sandy712-Amethyst
12-Amethyst
January 24, 2024
Solved

Build action issue

  • January 24, 2024
  • 2 replies
  • 2393 views

Hello,

 

i am facing one problem while performing build action. the corresponding gear parts are not showing up even they are associated with CAD. see attachment.

creo-7

windchill-12

 

please help.

 

thanks,

sandy

Best answer by avillanueva

https://www.ptc.com/en/support/article/CS260882?source=search

Looks like the CAD is linked to multiple versions? I think you need to remove the CAD association from the A version. Make sure you revise both together. You can do this in a clean empty workspace against the older version. Might need admin if released.

 

2 replies

HelesicPetr
22-Sapphire II
HelesicPetr22-Sapphire II
22-Sapphire II
February 1, 2024

Hi @Sandy7 

Why do you not use owner association?

What error is shown on the red sign in the middle of a comparation table.

HelesicPetr_0-1706779951863.png

 

PetrH

PetrH
S
Sandy712-AmethystAuthor
12-Amethyst
February 8, 2024

error is "The CAD document has owner association to multiple parts and the system cannot resolvewhich one to add. the actions to build part structure will fail."

HelesicPetr
22-Sapphire II
HelesicPetr22-Sapphire II
22-Sapphire II
February 8, 2024

Hi @Sandy7 

The error says everything. 

So you need to chose the correct WTpart that should be build 😄 

But in your case you do not have a right to see that WTPart. 

You need to contact administrator to solve the issue that you can see the wtparts that are associated to the CAD Model.

PetrH

PetrH
S
Sarathkumar_M12-Amethyst
12-Amethyst
February 9, 2024

Hi 

 

Can you try this 

1.Clear the workspace first

2. Second download(add to workspace) the error parts (least part ) in workspace 

3. then download (add to workspace) the assembly files then it will work 

or

otherwise you need to build properly in BOM structure

Thanks 

 

Terms & ConditionsCookie settingsAccessibility statement