cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Want the oppurtunity to discuss enhancements to PTC products? Join a working group! X

Creo Parametric Bulk Items and Windchill

N.Barnes
12-Amethyst

Creo Parametric Bulk Items and Windchill

What parameter in a Bulk Item CAD model is used to pass the unit of a bulk item model to a built eBOM in Windchill?  I have an associated HWPart and Bulk Item Model. 

 

BOM_REPORT_QUANTITY passes the quantity from the bulk item to the eBOM in Windchill.   But I'm unable to get any unit in the assembly structure other than "EACH".

 

The associated HWPart has a default unit of "OZ - OUNCE". 

 

I tried adding the following parameters to the bulk item model

  • Unit
  • UNIT_OF_MEASURE

 In those parameters I've tried "OZ" and "OZ - Ounce".   In all cases, the Unit in the eBOM always comes in as EACH.

 

Thanks for any assistance. Nick

 

(FWIW: I'm testing on Creo 9 and Windhill 12.)

Some related topics:

https://www.ptc.com/en/support/article/CS127515?source=search

https://support.ptc.com/help/wnc/r12.1.1.0/en/index.html#page/Windchill_Help_Center/cadx/CADxInfoPgRprtsBulkItemAbout.html

https://support.ptc.com/help/creo/creo_pma/r8.0/usascii/index.html#page/assembly/asm/asm_four_sub/About_Bulk_Items.html#

 

 

 

 

 

ACCEPTED SOLUTION

Accepted Solutions
BenLoosli
23-Emerald II
(To:N.Barnes)

If you look at this idea, PTC has no plans to implement this issue.

Creating BOM out of Creo with other quantity unit ... - PTC Community

View solution in original post

3 REPLIES 3
rleir
17-Peridot
(To:N.Barnes)

Look at the QueryBuilder options and 'OZ' seems to be valid for Quantity.Unit. See the attached png.

BenLoosli
23-Emerald II
(To:N.Barnes)

If you look at this idea, PTC has no plans to implement this issue.

Creating BOM out of Creo with other quantity unit ... - PTC Community

N.Barnes
12-Amethyst
(To:BenLoosli)

Classic PTC.   Thanks Ben. 

Announcements


Top Tags