Arbortext

The ArborText Editor always adds a line return after an XML comment in the Edit view.Can this be changed by using the stylesheet or in a configuration file?

Getting an error in AT Editor 6.1 when trying to print a simple enough XML document.The error window states "editor.exe: segment violation (signal 11)".When I pull up the editor_err.log file in my Users\TEMP folder, it reads this:PTC Arbortext Editor (Build R61M010-339) terminated unexpectedly at Thu Sep 25 14:18:18 2014:editor.exe: segment violation (signal 11)Current ACL statement at "C:\Program Files\PTC\Editor61\packages\main\_winev.acl":71: 71 [1] returnACL function traceback at time of error:#1 print::modified_print() at "C:\Program Files\PTC\Editor61\packages\main\_winev.acl":71Local variables of active function:$p1=0$p2=0$o1=(-1,0,0)$o2=(-1,0,0)I have no ideas what could be going on. The XML document I'm trying to print is extremely simple:<!DOCTYPE OUR CUSTOM DOCYTPE HERE><searchList><row><searchTerm></searchTerm><context>printOnly</context><description></description><highlightStyle><style type="highlight"/><

We've received word that some members of our user community are not making use of Arbortext 6.0's autosave feature (ie, "write recovery file every X minutes") due to the belief that it does not allow for an unlimited number of undos. This, to us, seems to make very little sense. The documentation we have found does not seem to confirm it our suspicions (that there is no coorelation between these two features) so figured I'd ask here, in case anyone knows for certain.Thanks!

I am wanting to add an image to my cover using styler. I would like it only to show when I choose the profile OM and set my language to ru. I have created a UFE for it and created a condition for itXPATH expression (//servicemanualmap/@xml:lang="ru") is true andXPATH expression (//servicemanualmap/@otherprops="Op_Manual")When I publish I do not get my desired result.See attached image in styler. I must be missing something.Bryon

This is such an obvious topic I was surprised by the lack of information in the Styler manual, help files and on-line. It seems like a really obvious topic to me, but I could only find a single reference to counting the sheets and/or graphics of a figure in the Arbortext help file documentation. "Counting Sheets of a Figure in Styler" which is basically a FOSI topic, and "Coding FOSI support for sheet count".Is there an equivalent topic showing how counting sheets and/or graphics can be done within Styler itself?Ideally, the styling should be able to recognize when there are multiple graphics/sheets in a figure and output the Figure number, title, followed by (Sheet 1 of n), thus if there are multiple sheets/graphics in a figure it should output something like "Figure 1. Name of Figure (Sheet 1 of 5)".

Hello everybody!OK, I've been working with oids in Arbortext Editor to implement a navigation algorithm through the document using Java and ACL, the first stage of my project was only related with navigation, however, now I'm making changes in the document, which means, I'm inserting new tags in my docbooks. I'm having a problem which I identified some weeks ago; in order to execute the navigation I generate a map using a list created with java and all I do is navigate through the list, the list contains oids corresponding to every element inside the document, and the idea is to update the list everytime that changes are made in the document, however, I saw that when I insert a new tag the oids of some of the elements change, not only the which one of the modified tag but instedad the following tags/nodes, this force me to REMAP the document, which it wasn't a big problem until I have to execute this navigation several times in another functionality that requires to navigate and change

I must have missed an earlier post on TECHWR-L (remember them?) about their"Fast 5: The Hitchhiker's Guide to XML Authoring" hangout. Oh well, youwould have ignored it until this reminder anyhow, right?Here is the description of the event:In this hangout we'll explore the business side of XML including if yourcompany needs to migrate to it, preparing for the journey and ensuring youget every penny out of the investment. We hope you can join us onWednesday, October 8th at 12PM Eastern Daylight Savings Time (EDT) for thisevent.Here's the event page:

This is such an obvious topic I was surprised by the lack of information in the Styler manual, help files and on-line. It seems like a really obvious topic to me, but I could only find a single reference to counting the sheets and/or graphics of a figure in the Arbortext help file documentation. "Counting Sheets of a Figure in Styler" which is basically a FOSI topic, and "Coding FOSI support for sheet count". Is there an equivalent topic showing how counting sheets and/or graphics can be done within Styler itself? Ideally, the styling should be able to recognize when there are multiple graphics/sheets in a figure and output the Figure number, title, followed by (Sheet 1 of n), thus if there are multiple sheets/graphics in a figure it should output something like "Figure 1. Name of Figure (Sheet 1 of 5)".

Hi,Basically I just want to know whether anyone has created an Import Map Template to import MS Word files into Editor S1000D modules? Is it possible and how difficult is it when compared to creating a map template for Docbook?Thanks!

I'm facing a problem in one of my XUI windows when I try to load a file from a certain directory; my dialogue is a loading file window and the idea is to load the file from a directory specified by a path loaded with a 'Browse..' button, the problem I'm having is that every time I load certain paths I receive the "[A11316] Unexpected argument error"; I could see this only happens when the directory contains a blank space in the name of any of the directories including in it.I hope anyone could explain me alittle more about this A11316 error so I could handle it.Paulette 🙂

Hi,I am working on a Styler stylesheet and I noticed that my HTML output has very narrow columns for the tables, when I checked them I noticed that the value for width is set to px. In the source it was set to picas.Arbortext Editor XML:<tgroup cols="3"><colspec colname="col1" colwidth="12.80pi"/"><colspec colname="col2" colwidth="12.00pi"/"><colspec colname="col3" colwidth="13.00pi"/">Styler HTML Output: <colgroup> <col style="width:" 12.8px;=" "="> <col style="width:" 12px;=" "="> <col style="width:" 13px;=" "="> </colgroup>Obviously, this conversion of units is way off. I am hoping there is a fix for this issue in Styler. Any ideas?Many thanks,Greg🙂

Hello there,I would like to know the way to resize images in XML document by using Arbortext Styler.Although I know the way to adjust the size of images in Arbortext Editor with attributes (width, height etc...), I am not keen to use this way.The images are too big in the document at the moment, so I would like to make them look small through a stylesheet.Could you give me any tips please?Thanks a lot.Tomomi

I have a question regarding the sequence of numbering in Styler. I have a description Data Module to which I have added Division to levelledPara. I styled figure as a Formal Block. Problem 1: With each division the figures base numbering restarts at 1; I would simply like the numbering to run continuously throughout the document. At the moment, due to this, I have added the previous division number to the gentext, thus Figure 3-1, Figure 4-1... I would like to do without this.Problem 2: In the case of foldouts the numbering does not continue, it restarts, so I currently have Figure 1 (which is not a foldout), followed by a foldout Figure 1. The foldout element seems to be interfering with the base numbering.Any suggestions?

We use ACL COM commands com_attach etc. to open Word files and run Word macros. (Arbortext 6.0M050 64-bit; Win 7)# open named word file and run macro: h - Word COM handle; docsh - Documents collection; doch - doc to open[; docapp - Application property; docapprun - Application.Run macro method] h=com_attach('Word.Application');com_prop_put(h, 'Visible', -1);com_call(h,"Activate");docsh = com_prop_get(h, 'Documents');doch = com_call(docsh, 'Open', word_doc);if (word_macro) {docapp = com_prop_get(doch, 'Application');docapprun = com_call(docapp, 'Run', word_macro);}com_release(h);} Process is (1) "write" 2 versions of a file with Tracked Changes (-ct changesapplied | original); (2) XSL transforms 2 versions to WordML (Word 2003 XML Document) format files; (3) open 1st Word file and (3) run macro that compares it to reject-all "original" version (believe me, you don't want to write an XSL that transforms <atict:> tags to WordML). Result files showing Tracked Changes are sent to outs

I have a publication module which contains references to xml documents.From the Publication Module, how to create a book?What is the FOSI methodology to display in a book, the content of the XML documents using the references of the Publication module?

Hi Adepters,I have a strange behaviour with Epic 4.3.With this DTD :It does consider that <doc><intro>stuff</intro></doc> is not valide./doc [A11155] final tag encountered. More content is required (approximative translation)I do not encounter trouble with <doc></doc>.Somehow the presence of <intro> makes Epic unable to consider that one branch of the | can be empty.Thanks for any insightChristophe LefebvreLexisNexis France

Need to import Framemaker files into arbortext. Would like to know which approach will be suitable. Data received is .fm and .book files of Framemaker.

I am trying to apply style to title which is located at bookmap-> chapter->topic->title. But the style which i am applying is not reflected on the topic title. Can anyone tell me where should i make changes so that title changes.This title only changes if i use title in chapter. But if i use title in chapter to style title element my compound page numbering doesnt work. So please help me on this.

Hello,We are on a project and there is a customer requirement about watermarks on printed pdf files.Is it possible to have print outs with watermarks of a pdf document? The electronic form of pdf should not contain any watermarks. Is there a setting on Publish Engine or dita files regarding this requirement.Thanks,Andac

I have a foldout pageset in 5.4 Stylerthat is currently width="17in" and nomdepth="11in". I need to change it to 25.5in wide, but when I add even 1 inch to the width the text and graphics change their orientation on the page. All I did for testing purposes was add 1in to the rectopg/versopg width and the width of the 1 column flowtexts.

Thank you to everyone who joined us in London last week and to our excellent speakers.On the 17th and 18th of September 2014, 28 people, from 23 companies and 8 different countries joined us in West London for this year's Arbortext and APP user event, for what was our most technically minded, open and relaxed event to date.An overview of the event and a small gallery is now on the event page. (www.tformat.com/appworld/)Until next time ...

We are pleased to announce the 2014 Arbortext & APP users' meeting which will take place on 17th & 18th of September in London.For more information on the agenda, early bird registrations, speaking/demo opportunities and sign up to the event updates newsletter.Please see arbortext.solutions/appworld/

When I open a topic, find some red alarm, and blue font with purple background.Why?I think it's the problem of DTD?When I open a topic, which DTD I use? How can I check which DTD I used?Can we change the DTD for a topic?Thanks!

Hi experts,I am trying to run acrolinx while checkout a topic in arbortext editor. Anybody can help me how to configure in arbortext ACL to do that?Regards,Roopesh Navath

A developer's most important tool is without doubt the code editor. When I ditched Linux on the desktop two years ago (the tipping point was when a buggy X driver fried my graphic adapter), and started to enjoy Windows 7, I needed a replacement for Emacs. In my earlier life in Sweden I'd been using Textpad from Helios Software for a decade, but this product seemed to have reached "maintenance mode" (esp. regarding handling of Unicode).So I spent several days searching a commercial code editor suitable for ACL. Finally i decided to buy Zeus (http://zeusedit.com).Don't let the somewhat unprofessionally crafted website fool you. Or the slightly old-fashioned looks of the GUI. This is an extremely powerful, mature and stable product. It doesn't aim to be an all-purpose texteditor (like UltraEdit). The target audience is programmers.I'm attaching a "keyword information file" defining the "document type" ACL (see http://www.zeusedit.com/zforum/viewtopic.php?t=176). It defines not only highli