Archive Read Only

We can see ‘protkmt.lib’ and ‘protk_dll.lib’ in WF 5 distribution so notsure why PTC gave you that reply.If that is the case you should approach PTC with your linking problem too.They might be the best option to resolve this.Regards,Vinay

Hi,is it possible in WF4 to do a "Create Bend" with a K-Factor instead of a bend table?? With "Create Flat Wall" and "Create Flange Wall" I can choose between a bend table and a "custom" K-factor, but Create Bend doesn't seem to give me the choice?!Thanks in advance!Regards,Jaap

Here is the summary of the post: For reply from PTC, see attached email.

does anyone know how to construct bevel gears using Wildfire 5 ?

Is there a way to get mass properties to not show the mass in scientific notation?

Are there any help files out there that provide more detailed help for the rendering module? The existing information is pretty minimal.

I am looking for models of the HUMVEE front and rear suspension. Any format would be of great help.thanks,JD

I have a round model with different shapes and cutoutson the inside and outside of the model. I want to show a cross-section of 2 sections of this model. I have tried using a ofset section of it but the section that is on an angle from the straight section is not un-folded it is a straight view so it is not giving me the full section of it. How do I unfold the section or for lack of a better word rotate that angled section so I see it as a full section? I am using Pro-E Wildfire 3.0. Any help would be appreciated Thanks

http://www.onespacedersleri.com

When you copy files, using save as or other methods, you get a new file with a new filename, but the same name as the original file.The file name search in the model tree search tab shows the name, not the filename in the results window. So it may show you two or more items with identical names, but the file names for each would be different. This can cause confusion and has resulted in the wrong files being modified.Is there some way to force the results window in the model tree search tab to show the filename instead of the name?David HaighPhone: 925-424-3931Fax: 925-423-7496Lawrence Livermore National Lab7000 East Ave, L-362Livermore, CA 94550

Who will be two-dimensional into three-dimensional three-dimensional?

We are going to be upgrading to Wildfire 5 and PDMLink in the near future. I'm curious as to what combination of releases/versions of the twopeople have found to be the most stable. We are trying to decide what to install...

Is it possible to perform an acostic mode analysis with mechanical?any comment will be welcome.

Pro/Users (or should I say planetPTC'ers?), Back at it again with another link to a short video tip from acontributor (AB) at Pro|HOMEPAGE. This isa new Wildfire 5.0 technique that slipped through the cracks until recently discovered. If you Project curves, you will like this one. Yes, it is a very specific case, but we have already found several scenarios where this is a big time saver.

Not long ago our headquarters decided to change the enterprise PDM system from Intralink3.4 to Teamcenter. They did this for nearly all the satellite sites as well, with the exception of the facility I'm at. However, we are scheduled to migrate our datain the near future as well (Windchill 9.1 to Teamcenter).Recently I've heard some comments from one of the other satellite sites that are causing some concern. Theproblems appear to be significant both in terms of severity and quantity. I've also heard of some of the trials and tribulations that CAT went through in their attempt to use Teamcenter along with Pro/E, which does not paint a pretty picture.My question to the usergroup is this; Does anyone have experience with a Teamcenter-Pro/E integration and what are the major pitfalls and/or benefitsto look out for?Please be specific; replies of "it sucks" or "it integrates flawlessly", while valid opinions, don't really explain the reason behind the opinion.Thanks

Hi,I've had some good suggestions to fix my challenge.None of them have brought success. I finally deleted a frozen component in asubassembly and that fixed it. Who woulda thunk?Thanks for the help.Sip

Does anyone know what option lets me see what modules has been loaded when Pro/E first starts? My old Wildfire 2.0 used to do it and now that I loaded 5.0 it no longer shows the dialog box on start up.Thanks,Jay

I have installed WF5 & now the 1-6 buttons, fit & view buttons on the spacepilot are not responding. I have installed the lastest driver from the 3Dconnexion web site. Has anyone else had this problem?

I logged out and noticed that the forums are viewable to non-members (unlike the old PTC forums). Does this mean the forums will be indexed by google? This is a highly desirable. I've created a custom google search that searched eng-tips and MCAD central and I'd love to add this forum to the list.-Matt

All, We have a bunch of library parts in pdmlink that we want to update the descriptions on and other than the librarian checking out and changing these things one by one I've heard that there is a tool to bulk load but I don't know what it's called or who would have used something like that. Anyone with an idea of what this tool is or who has used something like this? Thanks,Len

Does anyone know how to only show posts for communities I am following?Also how does a new community get created. We use Pro/E and some CoCreate, so I would like to follow those two communities, but CoCreate does not exist.ThanksPaul

Found where the problem is, just not sure how to fix it.I have code in my FIL as follows;$$ this routine will start the ROUTER PROCESS ENABLE G58 CIMFIL/ON,PIERCE T4TH=POSTF(7,4) CASE/T4TH WHEN/ICODEF(ON) $$ Always want to turn pierce on when told to INSERT/'M58$' WHEN/ICODEF(OFF) RSLT=POSTF(14) $$ Read the next command line to see if it turns pierce back on RSLT=POSTF(20) $$ Save this read cL record T5TH=POSTF(7,4) IF(T5TH.EQ.ICODEF(ON)) THEN $$INSERT/'DETECTED REPEAT$' ELSE $$INSERT/'NO REPEAT DETECTED$' INSERT/'M59$' RSLT=POSTF(21) RSLT=POSTF(13) ENDIF ENDCASCIMFIL/OFIf I delete this code the opskip works perfect. What in the above code is causing the opskip to fail?

If you didn't see the announcement today: 3000 N. Highway 61 Muscatine, IA 52761

Does anyone know what the entry is to produce the equal to or greater than and equal to or less than symbol within a note? Thanks,Krystal

When I try to use the skip regions in build cut I can only pick oneregion at a time and it has to reprocess all before I can pick another.Any suggestions?Thanks,Byron TaylorCoordinator/ProgrammerDanfoss Commercial CompressorsOne Scroll DriveArkadelphia, AR 71923E-mail: byron.taylor@scrolltech.comTel.:870-246-0750