Archive Read Only

Back in version 20 there was an option that let you display pro in fullscreen mode, no menus, command lines etc. I used it when givingpresentations and it worked well now I can't find it in WF2. Does this stillexist and if so where is it?For all of you who asked PTC has informed me that this is no longeravalable. Sorry.David LawrenceMechanical Engineer301.552.6300, X124301.577.9466 FaxSigma Space Corp4801 Forbes Blvd.Lanham, MD 20706www.sigmaspace.comFull Screen Display

Well, to me, it looks like mapkeys and patience is probably the best (safest) way to go right now. Would some one like to share some WFII mapkeys? <<layer_mess.doc>> Thanks,Dan SchurrCAD FacilitatorEATON Corporation13100 E. Michigan Ave.Galesburg, MI 49053tel: 269-342-3236fax: 269-746-6236-

Back in version 20 there was an option that let you display pro in fullscreen mode, no menus, command lines etc. I used when giving presentationsand it worked well now I can't find it in WF2. Does this still exist and ifso where is it?Thanks,David LawrenceMechanical Engineer301.552.6300, X124301.577.9466 FaxSigma Space Corp4801 Forbes Blvd.Lanham, MD 20706www.sigmaspace.com

------------------( Forwarded letter 1 follows )--------------------

That's great.Has anyone else got any mapkeys that they had to write to either work around the limitations/changes in WF, or to bring back 2001-type functionality?I would love to see some of those....Thanks,WarrenLuis Colom wrote:> Warren> > You are not alone!> > I made a mapkey to toggle highlighting on/off. I also added to a button> > > mapkey ss @MAPKEY_NAMEPre-Highlight;@MAPKEY_LABELPre-highlight on/off;\> mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Edit`;\> mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;~ Select > `main_dlg_cur` `Edit.cbSelect`;\> mapkey(continued) ~ Close `main_dlg_cur` `Edit.cbSelect`;\> mapkey(continued) ~ Activate `main_dlg_cur` `psh_sel_filter`;\> mapkey(continued) ~ Activate `selprefs` `PrehButton` ;~ Activate > `selprefs` `Ok`;> > -Luis> Smokejumper>

Hi there, can anyone point me in the right direction on how to get section arrows in a view using wildfire 2???Thanks in advance

We just switched to from WF 1.0 to WF 2.0, and something happened to theability to select multiple edges with the INTENT option that becamevisible while right clicking or choosing PICK FROM LIST.Anyone know if this is still functional in 2.0?Thanks in advance...

Associates, Does anyone know how to get the "mapkey paused" dialogue box to show up somewhere else other than the middle of the window? I knew how fix this in previous versions, but it doesn't work in Wildfire 2. Any assistance would be greatly appreciated. Thanks.Dave

Problem solved, I appreciate the fast reponses. Here are some interesting points:There were 6 responses. Half said text_dir\text\resource, the other half insisted the language be added, like text_dir\text\usascii\resource. For me I had to go with text_dir\text\usascii\resource to get it to work. Without the usascii it just wouldn't work. It could be a release\version issue. I'm using 2001, 2002350. Funny thing is, that if I copy my .res file to my loadpoint\text\resource which is where I currently have the pro_directory set to, it finds and uses the res located there first. If I remove it from there, it finds it in text_dir/text/usascii/resource. This is not whats documented for the pro_directory variable, but its what happens for me. I stumbled across this because I named my test .res file confirm.res which exists in your loadpoint/text/resource by default. I was suprised to see a different dialog pop up other than the one I had made and had to figure out where it was coming from. Tha

Does anyone have a boring head model?

Thank you very much for your feedback. We will avoid M090. We will be upgrading in 2 weeks, so cannot wait until M120, however - we will update to M120 when it comes. We're testing M110 and so far no issues. -Kelley

Is there a way to use Microsoft Word as the default text editor in Pro-e2001Bob ParsonsLead DesignerDana Heavy Vehicle Technologies Systems Group1293 Glenway Dr.Statesville, NC. 28625-9218Phone 704-928-4247http://www.dana.com/offhighway_systems/

Is there a way to rotate a component in an Explode State?ThanksLuisSmokejumper---- This e-mail and the information, including any attachments, it contains are intended to be a confidential communication only to the person or entity to whom it is addressed and may contain information that is privileged. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by e-mail administrator@dekaresearch.com and destroy the original message. Thank you.

Hello All,I'm looking for a script or something to run that will open a library ofmodels and save them at a newer version of Pro-E.I have approximately 2000 files or more that are in version 18. I wouldlike them to be saved to version 2001.Something that will open, save, close, and pick next file.Any help would be greatly appreciated

Is Wildfire2 stable? I have been evaluating WF2 and have beenexperiencing some crashes. Is it any better or worse then WF1? I hate tochange our users over to an unstable release.Thanks

To all those with comments on the PTC web site, please read the message below. You input is wanted.Regards,Patrick Asselman

Is anyone knows why I always get a SPACE b4 my tool? This is portion ofmy tap file. O22G17G00G40G59G64G80G90G94N1T 1T0 (<---------it always put a space before mytool)N2G43H1 This is portion of my fil file. CIMFIL/ON, LOADTL TNUM = POSTF(7,4) XX = POSTF(2,1,1867,1) XX = POSTF (13) XX = POSTF (2,1,1867,0) CALL/NTOOL IF (%NT.NE.0) THEN INSERT/'TTT',TNUM,'TTT',%NT,'$' POSTN/OUT,H,TNUM,G,43 ELSE INSERT/'TTT',TNUM,'TTT0','$' POSTN/OUT,H,TNUM,G,43 ENDIFCIMFIL / OFF Sincerely, Thanh NghiCad SupervisorFirst Technology Innovative SolutionsPhone #: 734-254-1261Fax #: 734-451-9549

We are considering replacing our existing Xerox 8830DDS with a Xerox 6050for our printing/scanning needs. If you are using a Xerox 6050, I aminterested in your positive/negative comments regarding its use with Pro/Efiles. Thanks in advance.-Louis ///////////////////////Louis RuoccoCAD ManagerBechtel Nevada161 S. Vasco Rd., Suite ALivermore, CA 94550- (Phone) 925-960-2586(Fax) 925-960-2601

This may have been addressed earlier, I apologize if it has and PTC is currently investigating my issue.I noticed that default parts when shaded are a darker uglier color in WF2. I'm trying to re-establish the same default coloring that I had in 2001. PTC states that they are still using the same default color. PTC has messed with the lighting in WF2 such that tell if the lighting is the same in 2001 & WF2. I saved a 2001 lighting file and read it in WF2 without any success. Has anyone else noticed this ? Any fixes ?ThanksCarl

Can someone out there convert my company logo to an iges so I can use itin pro?

Hi Everyone,I would like to know if anyone has interfaced think3 (think-id) softwarewith Wildfire. Any information about think3 will be of great help to mebecause I'm unable to find an unbiased review on the web.Thanks in Advance.Aditya

Hello again Pro/UsersI am posting the Summary to my original thread on the Pro-User section. Idid not realize the original thread went out on the system-managmentsection.I am sure I would have received many more replies from this section thanthe system-management section, but I think I accomplished what I wantedfrom the thread anyway.Quick update for those who did not receive it in the system-managementsection:I believe PTC has a terrible site. There. That's about it.Now for the summary:99% of the replies agree with me on my point. Let me clear one thing upfirst. My complaint surrounded the difficulties in finding PTC Universitybut I was only using this as an example of why PTC's site is badlydesigned. The problem extends to many other areas of the site. My currentdifficulties had to do with PTC University, so I focused on that to make apoint. So please quick sending emails with the Direct Link to PTC-U. Iknow the direct link. The problem is that if you had to search for it onthe site

And the winner is....Frank Menedez Thanks for the help.

The gentleman listed in the following post wanted to ask a question so I am posting it for him. Please reply to Sonny directly if you might be able to assist him.Thanks!Rick==Rick SniderExecutive Director, PTC/USER