Community

Hello Everyone,I am trying to create a deployment in Intune for MathCAD prime 11 that uses the xml configuration files as a reference, but so far, I have been unsuccessful.I was wondering if anyone has success with deploying MathCAD prime via Microsoft Intune? If so, may I ask, what command line did you use? or possibly PowerShell script if that is what you use?

Version: Windchill 12.0 Use Case: We have a usecase where there are some child parts in a Product structure. These child parts are having the same classification node and likely the same classification attributes., but these are different part numbers for a business reason. The requirement is that it must be possible to select these parts with same classification , inside a PSB, and bulk edit the classification attributes. These parts are easy to find in the PSB as we use autonaming.Description: I have a custom wizard which has some other steps, and one of the steps is the bulk edit of classification attributes for chosen parts in PSB (having same Class nodes assigned).How to show the edit classification step in my custom wizard (as a wizard step)? 

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.2.1we are not able to activate a new or an existing ditribution target on our systems (DEV and PRD).The article https://www.ptc.com/en/support/article/CS342745 says the issue should be solved on version 12.1.2.1, but we still have the problem.Here are the errors that I facedATTENTION: il file "D:\ptc\windchill12\windchill\codebase\com/ptc/windchill/esi/ESIResponseMetaInfo.xml" non contiene l'elemento informativo sul gruppo con nome logico "DeletedSCCResourceLinks"

Hello everyone, I am working with Creo Parametric 12.4.2.0 and I want to export a .dxf file from a drawing, using:File > Save as > Export > DXF I usually use a sketch or a solid from a .prt file and place it in my drawing to do so. This works perfectly fine in Creo 3 and 6. My problem is, that whatever is contained on my drawing, gets turned into a image, when exporting it via Creo12. So if I open the .dxf file in another software, I do not have single splines or curves anymore, I have one big, very blurry, image, as seen on top here:  What have I tried:using a solid part as a baseusing a sketch as a basetrying different dxf versionsdeleting layers for the export checking unit is the same between .prt and .drw export without drawing boarderexport with drawing boarder What I found out:creating the sketch directly in the drawing file returns a clean assembly of lines - but I do not want to re-draw my designs from the .prt. So this is

Version: Windchill 13.0 Use Case:1. My client makes use of "Part" objects.2. They have a need to represent instances of these "Parts" as instances in parent objects.3. For example, my customer makes use of "Parent Part 1" and "Parent Part 2". "Child Part 1" is used in both parent parts.4. My customer has a requirement to make use of objects in Windchill to represent the different instances of the child part referenced by the two parent parts.5. These instances should be uniquely identified by serial numbers.6. It is important that the objects being used to represent the child part instances represent the form of the child part at a certain revision.7. It is not acceptable for the objects being used to represent the child part instances to simply represent the part master and not a specific revision of the part. It was previously suggested to me that making use of "Part Configurations" and "Part Instance" objects in Windchill is often not the best way to approach management of

Vession：Pro/ENGINEER Wildfire 3.0Problem：Normally it would look like picture1, but I encountered the problem shown in picture2, as indicated by the red box.(picture1)(picture2) 

Hi All, I've created an Industrial Thing with a Kepware connection. I want to create an application where adding and binding properties will be done from code without using Composer.I tried to connect the ready properties with remote bind using the service SetRemotePropertyBindingWithout success.I tried to create a new property using AddPropertyDefinition and it also didn't work. my aspcect json looks like that :{ "industrialDataType": "String", "tagAddress": "DB2000.STRING0.20", "scanRate": 1000, "tagType": "Static", "readOnly": "true" }Where I did something wrong?

Looking to create a service that will copy/move a file from a ThingWorx FileRepositoryThing to a Windchill Product subfolder. This is to be triggered by a service call from a ThingWorx mashup. Where I have seen information is for creating a file related to primary content for a task. This would be in a subfolder under a product. 

Join for 5 min or the whole hour.  Ask/answer questions. Nadeem Malik is inviting you to a scheduled Zoom meeting.Join Zoom Meetinghttps://eacpds.zoom.us/j/97015147580?pwd=ptggsl7o22bH3aSL9f9oMVq5oanFjo.1 Meeting ID: 970 1514 7580Passcode: 015923

What happened to a post asking about availability of FIDES 2022 model in Windchill Risk and Reliability? It can no longer be accessed. Moreover, when is FIDES 2022 planned for release? Said post had a response that it's preliminary set in roadmap for a release in 2024. Any updates on that?

Hi all,Creo+ Version - 13.1.0.1-001Windchill+ Version - 12.1.2.17 I'm trying to map attributes from Windchill+ to our start parts and then drawing templates to populate our change block. I feel like I'm probably not the first to try this and imagine there's a solution out there I just can't find. One major issue I face is that due to being on a Windchill+ system, I don't have the ability to change attributes through Type & Attribute Management without moving through PTC. If that is the only way to achieve my goal I will, but just need to know if that's my best bet. The attributes I would like to map would be :Change Notice NumberCA II DescriptionResolution DateCreated By If anyone has some information I would be grateful! Attached is image of an ECN with red outlines for the desired information to be mapped. Thanks,

We just recently upgraded to Windchill 10.0. Is there anyway to increase the font size in the windows?Thanks!Ted

I am using Mathcad Prime Release 10.0 and Datecode10.0.1.0is it possible to get version 10.1.1.0 for download?

In  whatt condition or when the following information appears in event log:Allen-Bradley ControlLogix Ethernet  MainLine.DATA_LOGGER | Details. | IP = '<10.3.XX.XX>,1,0:44818', Vendor ID = 1, Product type = 14, Product code = 168, Revision= 30.11, Product name = '1756-L85E/B', Product S/N = 0XE46E97.

Hi,We currently have around 30 KEPServerEX installations with perpetual (node-locked) licenses on different machines. We are planning to replace those machines one by one, but we want to make sure we do the transfer correctly without risking:• losing the licenses• having them become invalid• or incurring additional costsWe understand that the standard procedure is to use License Utility → Transfer a product activation to generate a transfer request file, upload it to the PTC licensing portal, and then activate the license on the new machine.However, in our case, we do not currently have access to the original PTC licensing account / login information that was used when these licenses were activated. This is one of our main concerns.Before we proceed, we would appreciate clarification on the following:Is the above transfer procedure the correct and safe way to move node-locked perpetual licenses to new machines without penalty?Since we do not have the original account credentials, what

License activation issue, it seems like the Hardware ID of our user has changed, when I request a license now, with all correct info, I get the .dat file but when I import it, nothing happens and it stays unlicensed. Im guessing it's the ID of the device which is wrong. how can this be fixed

ThingWorx 10.1: Practical Tools to Power Your Industrial IoT and AI Hello ThingWorx Community! Thanks for the warm response to ThingWorx 10.0 and all your feedback, it’s been invaluable!! I’m excited to share what’s coming with ThingWorx 10.1, rolling out private preview this fall. We’ve focused on delivering practical updates to help you get more from your IoT investments, with new AI capabilities, stronger solutions, and tools to make developers’ lives easier. Here’s what’s new: Industrial AI That Works for You We’re doubling down on AI to make your operations smarter and faster ThingWorx AI assistant powered by Industrial AI Agents: Our private preview of AI agents lets you embed chat assistants directly into your mashup applications. These agents tap into ThingWorx’s contextualized IoT data, enabling quicker, data-driven decisions without complex setups. Model Context Protocol Support: MCP support with ThingWorx allows you to run centralized agents on a hub ThingWorx server, pull

Hi, I'm new to the forum. I've been using the free version of Creo Elements and I have about five files in pk2 format, one of which is important. I now have a Creo Parametric license, but I can't import pk2 files. How can I transfer the files from one software to the other? Can someone convert them for me so I can use them in Creo Parametric? Thank you very much for your help.

I am using Creo Parametric Release 12.4 and Datecode12.4.2.0Hello,in 2D drawing, I'm not longer able to fix the symbols to the dimension, but now just on the viewI remember in the old relase (9 - 10) It was possibleIs the a configuration needed or other to have the possibility?Thank's in advance

I am using Creo Parametric Release 11.0 and Datecode11.0.1.0How can we change the sequence of the ply when using trim option

I've tried to modify a report for the Variance below   Where I need to group my report by Context and calculate the average Resolution Days.However, adding the “Context” column does not group the results.Any idea how to fix this?ThanksGianpaolo 

Version: Windchill 13.1 Use Case: Hi everyone, I have some troubles with publishing in windchill. Whenever I click the thumbnail of CAD part, there were a popup "Sent To Publisher: Select WVS Job Monitor for job status". And then I'm getting status Job Failed. Can anyone please help me how to fix it? I could'nt see any preview in my thumbnail and I couldn't directly opened it in Creo View because the status Job is still FailedDescription: Job Log below:10 Feb 2026 19.34.01:Start Job: CAD Part - 3dmodel.prt, 1.210 Feb 2026 19.34.01:make temp dir $(publish.tempdir)\publish11428478569884603681.tmp10 Feb 2026 19.34.01:The EPMDocument Default Config Spec was selected as the default10 Feb 2026 19.34.02:Start: CAD Part - 3dmodel.prt, 1.210 Feb 2026 19.34.02:Authoring Application: Creo10 Feb 2026 19.34.02:Using Publish Rule version.xml from context Site10 Feb 2026 19.34.02:Transferring Files to: $(publish.tempdir)\publish11428478569884603681.tmp10 Feb 2026 19.34.02:error getting primary c

Hi all,I have been tasked with setting up a new kind of alerting in thingworx. It involves tracking a property value constantly and if it has been outside of the limits for a certain duration (in my case 30 minutes straight) then it will alert.  I'm stumped on how to go about this in an efficient manner as we would be constantly checking many properties at once with this logic. ~100 per thing across several things. Is there any built-in way to do this? Or has anyone done something similar? 

  Hi everyone, I have a use case where a client application calls a ThingWorx service every 10 seconds.The service is very lightweight and only returns a single property value (no database queries, no file access, no loops). From a ThingWorx performance and best-practice perspective:   Is this polling interval considered acceptable? Are there any concerns regarding scalability or platform load for such a setup? Any guidance or experience-based feedback would be appreciated. Thanks in advance!

Any CSV file generated by the Data Export mashup function is formatting any string data fields like an excel formula (ie string value: Example; in CSV file: ="Example").This improper formatting is visible both in Excel as well as when opening the CSV file in a text editor like Notepad++ This issue only occurs when the Data Export option is set to "CSV Excel Formatted". When the Exporter option is set to "CSV Standard" any string fields are treated and formatted as plain strings. This workaround however comes with the warning: "Enabling this property allows users to export data in a non-sanitized CSV format. Use this option only if you trust the data source." implying that this option should generally not be used.Inclusion of a BOM had no effect on this issue with either formatting option.What can I do to prevent the improper formatting of the string data? The issue is affecting the ability of users to analyze the exported CSV data when needed.