Community

when selecting the correct mathcad download i log in enter my details and product code, this then brings me to a page saying that there are no products entiltled to updates, this screen does not follow the step by step guide i was sent and i cannot download the software, i tried scheduling a meeting at 8am this moring and the person never turned up for the meeting. I am hoping this can be resolved quickly as i need this application for college. Many thanks

I purchased the "Mathcad Prime 11 Student Edition One-time License" and I am unable to download the software. I am unable to open a support case due to "insufficient privileges." Other times I am denied access and when I click help on the global representative link, it takes to a page that does not even open. I have already made a post on the PTC community, but have gotten no replies, I am not sure what else I can do.

We're currently using IsoDraw 7.3 and planning to upgrade to version 7.4. During internal testing, we discovered that 89 out of our 214 oldest files (originally created with IsoDraw version 5) cannot be opened in 7.4.3.The error message reads: “The file is written in an IsoDraw format that I cannot read. You may be able to open the file with a newer version of IsoDraw.”According to the official release notes, only files created with IsoDraw version 4 are no longer supported—version 5 is not mentioned.Has anyone experienced a similar issue or found a workaround to open or convert these files? Any tips or suggestions would be greatly appreciated!

Hi there What is the difference between ( match) and ( lookup ) function in mathcad prime 11thanks Yusra 

Hello, I am trying to use an IF Statement to check one vector against another.  I would like to return the same value into a vector or an altered value depending on if the one vector's value at a row is above 0 degrees.  I have tried replacing Theta_0 with the value of 0 deg.  Either way I am getting an error that says the value must be a scalar.  Could someone help me figure out how to make this IF Statement function properly?   V/r,Devin

Hi, I like to have a dynamic list of tracker names/links to tagged trackers on a wiki page.I can do something like that with a report, but it list all tracker items. Also, a plugin would be oka Example Project NameTracker NameTagsTracker IDP1AT1, T2, T31P2BT12P2CT23 as Plugin: [{TrackerList tags='T1'}]as QueryWHERE trackerTag IN ('T1') GROUP BY "Tracker Name'but  only list the (linked) Tracker name (as it is, it lists all Items in the trackers). Result (ideally): [Tracker in P1|TRACKER:1]\\[Tracker in P2|TRACKER:2]\\ 

在学习创建process plan / work element .如下图，我该如何查看在左侧的MBOM结构视图中的某个部件，被分配去了process plan中的哪项work element ? 

Hi community, Our questions Creo MBD modules and create to links. I can add links. But how can I ensure that when I click the link, the CAD document opens in a new window? 

My computer factory reset and I have a student license for MATHCAD Prime. How do I re-download MATHCAD? When I go to the Mathcad quick installation guide and I go here: https://support.ptc.com/appserver/lm/mathcad/download/index.jsp and I enter my product key nothing pops up for me to download. Thank you for your help!

Hello HelesicPetr and jbailey. What Kind of data I can see in WBMFF MissingLinkReport.csv? Do you have any document for reference with example. Also,How below table are linked with each other in DB and their Purpose.    --> CONTENTMETADATA   --> EPMASSTORED   --> EPMFTPROP   --> EPMVARIANTLINK   --> EPMSEPFTPRIVATE   --> EPMMEMBERLINK    --> EPMREFERENCELINK   --> EPMCONTAINEDIN   --> EPMDOCUMENTMASTER   --> EPMDOCUMENT   --> ATT_EPMDOCUMENT   --> MigrationSourceSite Need your suggestion.

I am using Windchill PDMLink Release 13.1 and Datecode with CPS 13.1.1.0用AD域账号登录windchill失败；配置完Info*Engine 管理后，可以在参与者管理搜索到对应的用户，但是无法通过账号密码进行登录；

Version: Windchill 12.0 Use Case: In some cases, we need to add a model in an assembly just for reference or space claim reasons and we do not want the WTPart associated to that reference model to show up in the Windchill WTPart structure and therefore end up to ERP BOM.Description: What is the recommended/best practice for excluding items from WTPart structure?I thought that the preference "Part Structure Override Attribute Name" would be the way to do this, as the description for that preference says that it "Identifies a boolean soft attribute name that determines if the CAD document participates in build. This soft attribute can be on: iteration, master, member link, model item, or model item link. This soft attribute also determines whether to autoassociate the model to a part." So I created a reusable boolean attribute, added it as a global attribute to the "CAD Document Uses Link" type and inserted the internal name of that attribute to the preference. Then I crea

Trying to update the production (part count) for the past timestmp based on the "Production Event UID". Used the following service, PTC.SCA.SCO.MnfgCommonProductionUtilsThing.AdjustProductionQuantity_PRD() The count reflecting into current shift or current production event. The part count considered as current part count from machine. What is best practices or possible ways to update the part count for past timestamp using production event?   @mstarnaud 

Thanks in advance for any input.  I am somewhat new to Mathcad Prime.  I have generated a range variable sigma_t. when i use this in an equation H(sigma_t):= it does not compute and gives the "this variable is undefined" error.  I cannot for the life of me figure out what the issue is and what i can do to fix this.  assistance would be greatly appreciated!

Version: Windchill 13.0 Use Case: For a change status monitoring system based on SQL reports against the oracle source tables, we want to accommodate a specific department's practice of tracking in-progress efforts by saving and updating comments on open tasks.Description: As https://www.ptc.com/en/support/article/CS153902 makes clear, WFVOTINGEVENTAUDIT stores user comments for completed workitems, but it is not populated before they're complete. However, users can enter comments on a task and save it without completing it, and there is no alternate source mentioned in this article for comments on running tasks. I have a complete change task tracking setup already built, and pulling comments on completed tasks is no problem.  I just can't figure out where the comments are if they're saved on a task with no entry in the voting event audit table.  My efforts to trace known comment strings in the source tables have come up empty, but our database has some grant i

Is there any way to copy text from one table A to another table B. What ever I input in Table A should populate exactly in Table B. (This is to avoid redundancy & mistakes)SEE Image attached 

I want to try matchad for the first time on this email accont and it says that i have reached the maximum number of licese request

Good Afternoon, Community,Would anybody be kind to help on how to program the Roof Live Loads tributary area as one function to take care of column or can I do this in Comb in Mathcad Prime. Please see attached. Thanks,.Olu 

Reference topic: https://community.ptc.com/t5/Analysis/Flow-Analysis-Post-Processing/m-p/871276#M11296    Hello @MB_10584523 ! Thanks for this post ... I have the same question or the same request. It would be great if PTC would enable calculation of average and mass averaged report for velocity (so, similar as for total pressure). This option should be available either through XYPlot either/and through interface output property.   @tmoser : good advice until implementation of my proposal into Creo. 😀   Have a good day  

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.1.1I would like to set permissions to Data Monitor for a specific user. What permissions do I need so that this user can view reports and download data monitor executed reports. Please advise. Note I didn't find any details in KB.

Hello, I would like ot know if there is any posibility to measure COM of subassemblies. According to direct method there si no way to propagatemeasure to higher level assembly.  Most of our frames has simple design with 1 rotation axis and one hydraulic cylinder and we need to confirm if analytical solution is confirmed by FEM model. So key parameter is COM of subassembly. In top level assembly there is a way how to measure COM of whole assembly but it is not enough to calculate reactions in joints.

Hello. I am simulating one beam model which rotates around an axis.・A clock spring is set on the rotation axis.・In MDO, beam model start to rotates upward once it start running I would like to explore Minimum Spring Constant K (Nmm/deg)  that allows the beam model to rotate more than 40 degrees.(no need to change Beam model dimension) In this case, is it possible to obtain a solution for the spring constant K with BMX?Or any other solution in Creo? I try setting Spring constant K as BMX Goal by using relation. But it was not explored This problem will be solved by hand calculations. However If a solution exists for this simple problem, I will apply the method to more complex problems . (to simulate Car Seat Tumble Motion) Any advice would be greatly appreciated.

How do I remove empty rows at the end of the second drop-down menu when selecting "steel" in the first drop-down menu?

Help to see what I am missing. I want to find the first component in the assembly and delete it.I can find the first component, but having trouble deleting.Here is my run methodpublic void run() throws jxthrowable, IOException { Session session = pfcSession.GetCurrentSession(); Model model = session.GetActiveModel(); if (model == null) { return; } if (model.GetType() == ModelType.MDL_ASSEMBLY) { Assembly assembly = (Assembly) model; Features components = assembly.ListFeaturesByType(false, FeatureType.FEATTYPE_COMPONENT); if (components.getarraysize() > 0) { try { // --- Find the first component in the model tree ComponentFeat targetComponent = null; // Get all features in order. Features allFeatures = assembly.ListFeaturesByType(false, null); // Find the first component feature in the feature tree for (int i = 0; i < allFeatures.getarraysize(); i++) { Feature feat = allFeatures.get(i); if (feat instanceof ComponentFeat) { targetComponent = (Component

I am using ThingWorx Platform Release 9.2 and DatecodeSP0thingworx plalform running come out the below error:it's can spilt 3 phaseat first it's come out:[SECURITY FAILURE Anonymous:@unknown -> /ExampleApplication/IntrusionDetector] Invalid input: context=HTTP header value: referer, type(HTTPHeaderValue_referer)=^.*$, input=https://bcnkmns0079.kmn.prod.cnb:8083/Thingworx/Runtime/index.html?mashup=BayerOEE_FloorSelect&twxToken=123&appKey=ed7a791e-6e50-46ba-af4b-fcc5753ede73&x-thingworx-session=true&user_id=GFWMB&user_name=陈兴梅then come out :Execution error in service script [getBoardRoomEquipment] :: Execute Query failed. Please check Database logs for more details.the last :com.mchange.v2.async.ThreadPoolAsynchronousRunner$DeadlockDetector@5d7dcbd2 -- APPARENT DEADLOCK!!! Creating emergency threads for unassigned pending tasks!Here are the errors that I facedExecution error in service script [getBoardRoomCleanStatus] :: Execute Query failed. Please check Dat