Creo+ and Creo Parametric

Check out this video on Creo Composites from PTC Application EngineersPresenters: Lee Goodwin (Technical Specialist, Principal) and Ryan Butcher (Technical Specialist, Fellow)Original Date Presented: August 17,, 2023 

Multibody – Clearance & Creepage Analysis,   Hello all and welcome to another blog post in the multibody series.   In today’s topic I would like to make you aware of the multibody setup possibilities for clearance and creepage analysis. With the introduction of bodies in Creo Parametric 7.0, we also introduced support of the COMPARATIVE_TRACKING_INDEX parameter for bodies. If you add it to individual bodies of a part, you can define and control the conductivity definition separately for different bodies within a part. The attached video shows an example on a fuse part by defining conductive ends as body with a different CTI value. Once the body level parameter values are defined, you can see the conductive highlighting including the metallic ends of the fuse and excluding the red inner body. (view in My Videos)   Thanks for reading & watching.  I hope it was informative. If you liked it, give it a Kudo.   Back to Creo 7.0 & 8.0+ Multibody Home:

Check out this video on Creo Ansys from PTC Application EngineersPresenters: Lino Tozzi(Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow) Date originally presented: July 18, 2023  

Check out this video on What's New in Creo 10 Tips and Techniques session  from PTC Application Engineers. Presenters: Jason Petersen (Solution Consulting, Principle) and Ryan Butcher (Solution Consulting, Fellow). What's New in Creo 10 Learning  

May 19, 2021 Replay WebcastThis video has chapters — open the player's chapter menu to jump to any section.Chapter Summaries0:00 – Welcome: Speakers, Webinar Logistics & Session Roadmap - Diane opens the Creo Flow Analysis "CFD for All" webinar and Rich Moore introduces PTC's Todd Kraft and Tom Quaglia alongside Simerics' Alex Jiang and lead developer Lei Shi. 1:56 – PTC Digital Thread: Creo Associativity & Creo Flow Analysis Foundation - Rich explains how Creo's fully associative parametric backbone anchors the PTC Digital Thread and how Creo Flow Analysis extends it with computational fluid dynamics for unseeable fluids, gases, heat, and pressure. 4:11 – Simerics MP Analyst Platform in Creo: Base, Plus & Premium Packages - Overview of how the entire Simerics MP Analyst CFD platform, with 1,500+ physics properties, was embedded into Creo Parametric across three tiers — Base (fluids/heat), Plus (moving/sliding mesh), and Premium (cavitation, multiphase). 8:06 – Creo Flow An

April 6, 2022 Replay WebcastThis video has chapters — open the player menu to jump to any section.Chapter Summaries0:00 – Welcome & Speaker Introductions Dana kicks off the "Using CFD in Creo to Accelerate Prototypes" webcast and introduces the presenters from Simerics (Rich Moore, Alex Jang, Lei Shi) and PTC (Todd Kraft, Tom Quaglia), along with instructions for submitting Q&A. 0:43 – Creo Flow Analysis Overview: Scalable Analyst-Level CFD Tom Quaglia introduces Creo Flow Analysis (CFA) as an analyst-level computational fluid dynamics product embedded directly in Creo, positioning it as scalable both upward for analysts and downward for designers doing digital prototyping. 3:02 – PTC–Simerics Partnership & Simerics MP/MP+ Platform Rich Moore explains why PTC selected Simerics, describing how the underlying Simerics MP and MP+ solver was embedded into Creo as CFA to make high-end CFD usable, affordable, and prototype-accurate for the Creo user community. 4:51 – Old vs New P

Check out this video on Creo Behavioral Modeling from PTC Application Engineers!Presenters:  Mark DeCraene (Generalist Application Engineer, Principal), Lino Tozzi (Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow) To dive deeper into the subject, check out PTC University.

PTC is pleased to announce the all-new Creo Community Challenge, a recurring event where we’ll post an open-ended challenge for you to solve using PTC's Creo. Feel free to collaborate with other users and their worksheets by attaching your worksheet to your posts here. Participants will also earn PTC Community Badges! About every six weeks, we’ll post a new thread with the challenge on one of the Creo community boards. You can post in that thread throughout the period with contributions. Around the middle of the next month, PTC and our affiliates will go through the contributions and create a resolution in the form of a ptc.com blog article discussing your interesting approaches to the problem. Then, we’ll post a new challenge at the start of the next month. Challenge #6 is live as of April 29th. Submissions will close on Friday, June 7th. Try out the Logo Design Challenge! Some rules and guidelines:Your contributions will be monitored by PTC and PTC-affiliated

How to import surface model and repair to Solid by IDD

Check out this video on Creo Ansys Simulation Tips and Techniques session  from PTC Application Engineers. Presenters: Lino Tozzi (Solution Consultant, Fellow) and Ryan Butcher (Solution Consultant, Fellow). Creo Ansys Simualation Learning (view in My Videos)

Check out this video on Creo 10.0 from PTC Application Engineers Presenters: Jason Petersen (Technical Specialist, Principal) Lino Tozzi (Technical Specialist, Fellow) & Tom Quaglia (Creo Segment Sales) 

Check out this video on Creo Options Modeler from PTC Application Engineers. Presenters: Jason Petersen (Technical Specialist, Principal) & Tom Quaglia (Creo Segment Sales).  

Covers creation of repeat region relations to control quantity for bulk items in an assembly BOM table.      

Creo Parametric: Multibody Home --  Start Here!   I'm creating this blog to be the central home page for anyone interested in trying out the new capabilities first introduced in Creo 7.0  that support multibody design. Below will be links to other blog posts on specific detailed topics under the general heading of multibody. I'm interested in getting your feedback on all the new stuff, but I also want to try to do this in a somewhat organized fashion. So, you can think of this blog as the top node of a tree that will have a number of branches below it for the various multibody related topics.   In parallel to the list of blog posts below, I also plan to maintain a Multibody Infos post that provides you with links to further information, documentation, presentations, and any other information bits and pieces around multibody design in Creo. To get going effectively, I encourage you to first go through the What’s new material and tutorials that you find there, so

  Hello everyone and welcome to blog post #14 in this multibody blog series.   Today’s blog is about the use of the “Intersect” Feature to create the intersection curve between two bodies (or quilts) You might remember that Creo 7.0 introduced Boolean Operations to perform merge, subtract and intersect operations between bodies. These operations act upon a “target” body which is modified during the Boolean operation. The resulting object there is still a body. In order to create an intersection curve, we therefore cannot use the Body Boolean operations feature, but will use the “Intersect” feature within the “Editing” group.   Starting with Creo 7.0, this “Intersect” feature allows to select bodies as references.In this first example, we select Body 1 (yellow box) and Body  (grey cylinder) and get the full intersection curve as a result. This is illustrated in the image below. (Result is shown in small overlay image)   Note that you could also select just a

Hello everyone and welcome to blog post #20 in this multibody blog series.   Today’s blog is about illustrating a use case around geometry re-use that became enabled with the new appearance (and reference) propagations in Creo 10.0’s Body Boolean and Split Body features.  (see Multibody: Appearance and Reference Propagation for Boolean Operations (ptc.com) )  In essence we added two new options to Body Booleans as shown in the image below.   Those options allow you to control color propagation and reference propagation. That means for the below example, that when you subtract the orange and white bodies from the green eyelet part, we can propagate the color to the corresponding mating cut faces, and transfer references from the original to the new surfaces, so that for the attached annotations automatically move to the cut surfaces.       So, what is this good for? An example use case for this might be a scenario where you have standardized cut-out

Check out this video on RSD Libraries with Virtual Interconnect (PTC Partner), and Lino Tozzi (Solution Consulting, Fellow, PTC). Virtual Interconnect  

Check out this video on Creo View from PTC Application Engineers Presenters: Jason Petersen (Solution Consulting, Principal) and Ryan Butcher (Solution Consulting, Fellow). Creo View Learning  

Check out this video on Creo Parametric Options Modeler Tips and Techniques session  from PTC Application Engineers.Presenters: Jason Petersen (Solution Consulting, Principle) and Ryan Butcher (Solution Consulting, Fellow). Creo Options Modeler Learning  

Check out this video on Design for Manufacturing with DFMPro (PTC Partner).DFMPro Presenters: Tom Van der Auwera (Regional Sales Dir - DFMPro), Pranav Khurjekar (Senior Manager - DFMPro) and Ryan Butcher (Solution Consulting, Fellow, PTC). Creo DFMPro Learning  

Check out this video on Design Automation for Creo Parametric from CadActive  & PTC Application Engineers. Presenters: Phil Cluckies (CadActive), Ben Bowman (CadActive), Lino Tozzi (Technical Specialist, Fellow), and Tom Quaglia  (Creo Segment Sales). 

Check out this video on DFMPro for Creo Parametric. Presenters: Tom Van Der Auwera (HCL), Pranev Khurjekar (HCL), Steve Gerdman (HCL),!-->Nambi Chandrasekaran (HCL) & Lino Tozzi (Solution Consultant, Fellow, PTC)  

Check out this video on Automating Creo Parametric from PTC Application Engineers. Presenters: Nelson Caperton (Sigmaxim), Joel Beckley (Sigmaxim), Lino Tozzi (Technical Specialist, Fellow) and Tom Quaglia  (Creo Segment Sales). 

Check out this video on Virtual Interconnect Ltd'  software solutions for Creo Schematics. Presenters: Kieran Gilhooley  (Virtual Interconnect Engineer) & Lino Tozzi (Solution Consultant, Fellow, PTC)!-->!--> 

Check out this video on Creo Automation with Smart Assembly from PTC Application Engineers and Sigmaxim (PTC Partner).Sigmaxim Presenters: Nelson Caperton (Dir, Business Development), Joel Beckley (Dir, Engineering), Michael Denis (Systems Engineer,Carrier) and Ryan Butcher (Solution Consulting, Fellow, PTC). Creo Automation with Smart Assembly Learning