Skip to main content
D
Derek_Jefferson1-Visitor
1-Visitor
January 15, 2025
Question

Tables In Creo View Express

  • January 15, 2025
  • 3 replies
  • 1158 views

Hi

 

I have recently installed Creo 11 and been able to make tables in MBD.  I would like to be able to see these tables and other annotations in Creo View Express 

 

I export the Creo model with the tables and other annotations to pvz format and expect to see the tables but they aren't there.  I can see dimensions with GD&T callouts so I am assuming my recipe file (attached) is ok.  I did some digging and found that maybe I need the Creo View adaptor 11.1.0.0?  Do I even need the Creo View adaptor if I am manually creating the PVZ file using Save As from Creo 11?

 

Support_for_Table_Annotations_for_Creo_Parametric 

 

I thought maybe my version of Creo View Express was the issue so I went to the Creo View Express download page here and even though it says Creo 11.1. it downloads 11.0.0.  I installed that and loaded my pvz file and still no tables being displayed.

 

I used a recipe file as attached.  I had to change the rcp extension to txt, it wouldn't accept rcp.

 

My questions are; 

 

- Is my Creo 11.0.0.0 producing a pvz file that could show tables if the Creo View Express viewer was version 11.1?

 

- Is there anything else I can do to achieve the desired functionality of viewing annotation tables in Creo View Express?

 

TIA

 

Derek

3 replies

V
vdegaonkar15-Moonstone
15-Moonstone
January 15, 2025

Save As PVZ from Creo Parametric shall support from Creo Parametric 11.0.4.0 onwards. 

 

If you are publishing with Creo view Adapters (Interactive/Worker) then you shall be atleast on Creo Parametric 11.0.2 or later. 

 

Creo View Express 11.1 should be able to view table annotations. 

    V
    vdegaonkar15-Moonstone
    15-Moonstone
    January 17, 2025

    HI @Derek_Jefferson 

     

    Apologies for inconvenience caused in regards with Creo View Express 11.1 download. It was technical glitch caused the problem. 

     

    We have addressed the problem and now you should be able to download Creo View Express 11.1 from ptc.com page. 

     

    -Varad

    V
    vnamboodheriCommunity Manager
    Community Manager
    January 23, 2025

    Hello @DJ_01_10423714, 

     

    It looks like you have some responses on your topic. If any of these replies helped you solve your question please mark the appropriate reply as the Accepted Solution. 

    Of course, if you have more to share on your issue, please let the Community know so other community members can continue to help you.

    Thanks,
    Vivek N.
    Community Moderation Team.

    D
    Derek_Jefferson1-VisitorAuthor
    1-Visitor
    January 23, 2025

    Hi Vivek

     

    The issue, for me at least, has not been solved as yet. 

     

    My issue is specific to me wanting to create pvz files from Creo using 'Save As'.  After speaking with my local reseller and their communication with PTC, my understanding is that Creo 11 up to 11.0.3.0 is bundled with Creo View Adaptor 11.0 and 11.1 is what is required which will be bundled with 11.0.4.0.    

     

    Users running worker agents may be able to see the tables if they are using Creo View Express 11.1 and the Creo View Adaptor 11.1.  I'm not 100% sure on this, best to talk to your local reseller if you have an issue publishing MBD tables.

     

    I will respond to this thread once 11.0.4.0 is released and I can test accordingly.  

     

     

    Kind Regards

     

    Derek

    Terms & ConditionsCookie settingsAccessibility statement