Archive Read Only

Hi to all,I just tried to make a hole (Fine Metric) M18x1.5, which does not exist inthe default ISO hole-table.Pro/E provides data for M18x1, M18x2, and M18x2.5 but NOT for M18x1.5.I googled a bit, and find out that the fine metric pitch for the M18 hole is1.5 (in some cases I've found M18x2 as FINE)Does anybody of you ever used a M18x1.5 hole so she/he would like to sharewith me this data, in order to update the ISO hole-table?thanks in advance,Best regards,-- ----------------------------nk/.

Hi to all,I just tried to make a hole (Fine Metric) M18x1.5, which does not exist inthe default ISO hole-table.Pro/E provides data for M18x1, M18x2, and M18x2.5 but NOT for M18x1.5.I googled a bit, and find out that the fine metric pitch for the M18 hole is1.5 (in some cases I've found M18x2 as FINE)Does anybody of you ever used a M18x1.5 hole so she/he would like to sharewith me this data, in order to update the ISO hole-table?-- ----------------------------nk/.

Apologies if this has been answered before but I can't see it anywhereDoes anyone know where you can change the Default Spacing for Snap Lines ?

Hey,I am considering a contract offering with Unigraphics native files and use ProE Creo elements. What are the possibilities of completing a full contract obligation in ProE Creo and transferring model information to the Unigraphics model type?

Anyone noticed that a Quality Agent got installed when you installed Creo.It collects data from your system and sends it to PTC, so they can more easily troubleshoot problems.I don't see any help page in the utility itself and no mention of it on PTC's website.I'm concerned about what data it's collecting and if I have a chance to review and modify before sending it to PTC. (I have security concerns.)David HaighPhone: 925-424-3931Fax: 925-423-7496Lawrence Livermore National Lab7000 East Ave, L-362Livermore, CA 94550

Gurus,Is anyone out there creating windshields? If so what techniques are being used to make sure the curvature is nice and smooth, especially on the edges? I am having problems getting good curvature/transition on the edges.Thanks for any advice/suggestions that you may give.Michael WimberlyEngineering Applications Support Specialist III, Global Tactical SystemsT 513 881-4843 | M 513 833-3565 | F 513 881-5087 | -<">mailto:->BAE Systems, 9113 Le Saint Drive, Fairfield, Ohio 45014 U.S.A.P Before printing, think about the environment.

Guys,I am hoping someone can help out with this need. I am trying to find a supplier of a small quantity of Delta PT 22 X 6mm pan head thread forming screws for plastic. I need a total of 40 of these to build up some prototypes of a new product, but really only need 8 as soon as possible to hold me over until the remainder come in. Can anyone point me to a supplier that may have these in stock where I can order a small quantity? Thanks up front for any and all help!Best regards,Scott SchultzPrincipal Consultant3D Relief Inc.3700 Willow Creek DriveRaleigh, NC 27604(919)259-0610

Last week at the closing they said we would receive an email with a link to a survey, and after filling it out get a link to download the presentations.Anyone get that email yet?????My general grip about this is, in the past we were able to download the presentations beforehand. This allowed you to cull though them and decide which would be the best use of your time. This year we couldn't do that.Also didn't like that there was no voting on the best user presentations. Even if you don't win, you like to think that you have a chance at the recognition.David HaighPhone: 925-424-3931Fax: 925-423-7496Lawrence Livermore National Lab7000 East Ave, L-362Livermore, CA 94550

Hello, I have inserted UDF using default orientation(Adjustment->flip) , now I am looking for a option/way to change these orienation. I am not finding any option to do so.First thing I would like to know Is it possible to change UDF orientation once it is placed? if yes How can I do that? Thanks

I have successfully meshed a Pro/E structure within MECHANICA in the independent mode of operation. I could not get a successful mesh in the INTEGRATED mode of operation so I recreated my structure within MECHANICA itself. It DID CONVERGE without problems. HOWEVER, I cannot access the RESULTS. I know how to view results in the INTEGRATED MODE, but something is different in the procedure for the INDEPENDENT mode.Can anyone counsel me? My HELP menu does not operate in the INDEPENDENT mode so I have no direction. That is another matter as well, why does the HELP menu not work in INDEPENDENT mode?ANSWER my 1st ? & I will be HAPPY & if you know the answer to the 2nd then I OWE you a PAYCHECK or at least PTC does!!!!!!!!!!!!!regards, jeff

Is Stheno still plug-in for Creo?

What is the option to have SHOW/ERASE default to "SEL to KEEP? WF4.0 Thank you. -Art Art GaribayDrafter IIIPacific ScientificHollister, CA- <">mailto:-> Phone: (831) 637-3731 ....This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately.

Hi Folks,I have seen some headlines from the conference about release of Creo 1.0 andWindchill 10 incliding a press release from PTC.Very surprised that I have not seen any attendee feedback on what they haveseen and how they feel about it. Nothing I can see on the other forumseither.Regards, Brent DrysdaleSenior Mechanical DesignerTait Radio CommunicationsNew ZealandDDI +64 3 358 1093www.taitradio.com

I cannot find a way to have the Creo 1.0 window start-up in the maximized position.Can anyone help?Thanks,Kevin

Whenever I close a PV lite window (web page) that was launched from Windchill, I am always prompted if I want to leave the page or stay.Is there a way to disable this annoying prompt?Gerry

If you are going to the conference there is a new app on iTunes and the Droid marketplace. Works pretty nice. There is a build in calendar on the app. Tap the "star" to add event to the built in calendar. The add to device calendar pick adds it to your phone calendar instead.

windowsxp 64bitwildfire 3.0Having trouble creating a fillet in this corner (see attached image). The two neighboring fillets have a radious of 0.031". any suggestions?

All,I would highly encourage you all to use this application to help you navigate the conference this year. It's much more convenient than carrying around paper.PlanetPTC Live Mobile App Now Available!PlanetPTC Live is pleased to bring you a mobile application (sponsored by iBASEt and ArcherGrey) with all of the features you need to successfully navigate the event, right at your fingertips. Download a free copy to your smart phone to enjoy the following features without Internet access! * Searchable session schedule * Personalized schedule builder * Mobile directory and floor plan for exhibitors and attendees * Map of show floor, including attendee's location, location of an exhibitor's booth, and the best path to get there, plus specific exhibitor details * Twitter compatibility[cid:image001.jpg@01CC267A.AED17550]The PlanetPTC Live mobile app works on iPhone and iPad, Android and Blackberry smart phones. Attendees must download the free app to their smart phones to access the informat

Dear All:When I check in parts in commonspace, then I want to rename of parts.The new number block its't to fill in any word.attach picBest,Rita

Good Morning,We had made the the decision to go with PTC's Productpoint, but as I'm sure you're all aware, it is being retired. Full blown Windchill is more than we need.We are a small group, 6-8 Pro/e Users. Maybe 15-20 people would be using the PDM system. Any others in the same boat as us? Would be interested to hear what others are using.Thanks,David

Good Morning,We had made the the decision to go with PTC's Productpoint, but as I'm sure you're all aware, it is being retired. Full blown Windchill is more than we need.We are a small group, 6-8 Pro/e Users. Maybe 15-20 people would be using the PDM system. Any others in the same boat as us? Would be interested to hear what others are using.Thanks,David

HiI'm looking for a PP for a HAAS 3 + 2Appreciate this is a big askThanks in advanceBen

I am trying to extend the trajectory of a swept cut. All attempts yield an "invalid trajectory". Non-extended trajectory works fine. Trajectory curve is simply a projected arc. Is there a known issue with extending projected curves? Something else I am missing?WF4, M130.Thanks for all responses/suggestions.-Andy