Archive Read Only

I have installed WF5 & now the 1-6 buttons, fit & view buttons on the spacepilot are not responding. I have installed the lastest driver from the 3Dconnexion web site. Has anyone else had this problem?

I logged out and noticed that the forums are viewable to non-members (unlike the old PTC forums). Does this mean the forums will be indexed by google? This is a highly desirable. I've created a custom google search that searched eng-tips and MCAD central and I'd love to add this forum to the list.-Matt

All, We have a bunch of library parts in pdmlink that we want to update the descriptions on and other than the librarian checking out and changing these things one by one I've heard that there is a tool to bulk load but I don't know what it's called or who would have used something like that. Anyone with an idea of what this tool is or who has used something like this? Thanks,Len

Does anyone know how to only show posts for communities I am following?Also how does a new community get created. We use Pro/E and some CoCreate, so I would like to follow those two communities, but CoCreate does not exist.ThanksPaul

Found where the problem is, just not sure how to fix it.I have code in my FIL as follows;$$ this routine will start the ROUTER PROCESS ENABLE G58 CIMFIL/ON,PIERCE T4TH=POSTF(7,4) CASE/T4TH WHEN/ICODEF(ON) $$ Always want to turn pierce on when told to INSERT/'M58$' WHEN/ICODEF(OFF) RSLT=POSTF(14) $$ Read the next command line to see if it turns pierce back on RSLT=POSTF(20) $$ Save this read cL record T5TH=POSTF(7,4) IF(T5TH.EQ.ICODEF(ON)) THEN $$INSERT/'DETECTED REPEAT$' ELSE $$INSERT/'NO REPEAT DETECTED$' INSERT/'M59$' RSLT=POSTF(21) RSLT=POSTF(13) ENDIF ENDCASCIMFIL/OFIf I delete this code the opskip works perfect. What in the above code is causing the opskip to fail?

If you didn't see the announcement today: 3000 N. Highway 61 Muscatine, IA 52761

Does anyone know what the entry is to produce the equal to or greater than and equal to or less than symbol within a note? Thanks,Krystal

When I try to use the skip regions in build cut I can only pick oneregion at a time and it has to reprocess all before I can pick another.Any suggestions?Thanks,Byron TaylorCoordinator/ProgrammerDanfoss Commercial CompressorsOne Scroll DriveArkadelphia, AR 71923E-mail: byron.taylor@scrolltech.comTel.:870-246-0750

Is it possible to put one box around an entire multi-line note using the @[text @] command? (see the bottom note in the picture below)No matter what I try, I get the top note in the picture below. What I'dlike is the bottom note, which I faked in with draft entities. I can dothat, but I'd prefer something more robust. -- Lyle BeidlerMGS Inc178 Muddy Creek Church RdDenver PA 17517717-336-7528 Fax 717-336-0514 <">mailto:-> - <">http://www.mgsincorporated.com>

Hello all,I have a customer that needs me to open a .CGM (Computer Graphics Metafile) file in ProE WF 4, make some changes and then exporting it out as a .CGM.The problem I am having is that ProE does not see the file or does not recognize it.Does anyone have any experience with this problem?Many Thanks,TCW

Is there somewhere that lists what changes were made in the latest version?

I'm having a terrible time trying to catch to construction geometry. No 3D parts involved yet; I'm laying out the initial profile on WP1. I'm trying to overdraw a horizontal construction line to its intersection with a construction circle, and Catch doesn't seem to recognize the intersection, even when I limit Catch to Intersection. It insists that a point a few thousandths of an inch beyond the intersection is the right place to catch to. Everything else seems to work nicely. What am I missing? Any ideas?

I can't find the one I created. anyone have a map on how to get to a poll?

Hi Folks,We are gettinmg ready to change over to WF5 M040. One question is ifeDrawings will support WF5. Looking at the eDrawings site it sems that itstill only goes up to WF4. Anybody know anything different?Regards, Brent DrysdaleSenior Mechanical DesignerTait Radio CommunicationsNew ZealandDDI +64 3 358 1093www.taitradio.com

How do Ienable featurize of imported geometery?

I was looking up archived pages on PTC's web site, and I noticed that the CareZone E-Newsletter archive goes back to 2000Anyone know where the archive is for these older PTC Express Articles?David HaighPhone: 925-424-3931Fax: 925-423-7496Lawrence Livermore National Lab7000 East Ave, L-362Livermore, CA 94550

Yesterday Joshua Houser posted a link to his presentation on inheritance features from the 2005.I'm wondering where I can download presentations from the old conferences?I'm missing `02-`05, & `99I have Paper copies of conferences from`89 to `97David HaighPhone: 925-424-3931Fax: 925-423-7496Lawrence Livermore National Lab7000 East Ave, L-362Livermore, CA 94550

Hi Folks,I had a reply from Neal saying that he was using Wildfire 5.0 M010 witheDrawings 10.1.0.144 and that was working well. Thanks Neal.As I said I was concerned that the eDrawing stuff on their website onlyseemed to cover up to WF4 so this is good news for us. I knew that ourpresent version of eDrawings would not work as I had tried it when I firstloaded WF5 M010. Neal reminded me that eDrawing has to be installed afterProE to get the internal functionality in ProE.Regards, Brent DrysdaleSenior Mechanical DesignerTait Radio CommunicationsNew ZealandDDI +64 3 358 1093www.taitradio.com

I have a solution thanks to Mike D. from Synthes, he came through with the solution first. Thanks to all of the others who also suggested the same thing! JI missed the obvious pick, You must select the entire table first before the Line Display command becomes active.Thanks Mike for the tip!BWCMarc

I have a trajectory sequence that I want to put some drill cycles in. I have tried "inserting" the cycles but they did not work the way I wanted. I know that in the "cl command" one of the picks is "cycles". Can someone point me to what all the picks to define the drill are. I know the syntax in the cl file but what do they represent?

Hello everybody.probably I have missed something but:WHAT does it mean this new WF5 data code XNQO.1.1???

How do you remove product from the product side in PDMLink 9.1?

For those of you that are attending the PTC/User, and have downloaded my presentation, I was alerted last night that the videos require a codec from Techsmith in order for the avi's to play correctly. Without the codec you only get the audio, which isn't very useful.This morning I added the needed file to the proe_admin_101.zip file and placed a link to it in the powerpoint.If you've already download the files. you can get the required codec here:

For those of you out there who have PDMLink and are using the publishing of viewables capabilities of the tool. How much effort is involved in getting the publishing side of things set up and running?John M. ScrantonSenior DesignerUltra USSI4578 E. Park 30 Dr.Columbia City, IN 46725-8869*Voice: 260.248.3576*Fax; 260.248.3509[cid:image001.jpg@01CAF74B.127AB540]-- ">http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html xmlns="<a" style="COLOR:" blue;=" text-decoration:=" underline"=" target="_BLANK" href="http://www.w3.org/1999/xhtml">">http://www.w3.org/1999/xhtml"><head><meta http-equiv="Content-Type" content="text/html;" charset="utf-8"/><title>Untitled Document</title></head>==-==-==-Internet Email Confidentiality Footer-==-==-==Privileged, Proprietary, or Private information may be contained in this message. If you are not the intended addressee or responsible for the delivery of this message to the intended ad

Hi,Has anyone seen differences in CL Data from WF 3 to WF 5? Or any other version to WF 5. All we did was open the file and output the operation and saw differences. Anyone else experiencing this?Thank you,Jeff