Archive Read Only

http://www.ptc.com/appserver/wcms/standards/free.jsp?&im_dbkey=82672&icg_dbkey=21Maybe we should get this and put the model in front of a workstation running ProE? I wonder if excessive mouse clicks would pass ergonomic standards?This thing should assess the psychological impact of software interaction frustration.

hello,are any of the members of this forum located in South Australia?best regardsAlvaro

Sometimes is pays to procrastinate! Man, this was a fruitful thread today... Thanks to Chris, Alfonso and Brian, I learned today about Blender and GMSH. I don't expect to be given verymuch time to sit down and learn these tools but I will be poking around themin the near future. Thanks for the tips! _____

I'm in the process of loading it, but as usual having NightmareLink problems checking stuff in before I go to WF4. So, I haven't used it yet, but who is using it and what do you like/dislike? Thanks!

Sorry all, I proposed a solution before I knew what the problem was.G93 stays active on the control (Fanuc 31i) I just need a multiplier inmy post. Thanks.

Thanks to Andreas for the solution I was looking for!Simply use the single quote ' for the outer limitations of the string;the parameter value itself should be written as ".

We have a winner - if I don't use my start parts, then it works. Now all I have to do is redo my start parts.The answer came from -H.SaldanaI remember some time back when the intent option came out(200i^2) I noticed that some parts did not have the option while othersdid. After probing a bit more the only correlation I made was that theparts that were started in 200i^2 (w/ 200i^2 start parts) had the option butparts that were started prior to 200i^2 did not. We were using startparts that we carried over from rev 20 and even those parts did not have theintent option. I don’t know if this may the same issue or not butcheck the audit trail on the parts.

Howdy,I just installed Wildfire 4.0 M050 and have some odd things. On the left side, it does not allow me to navigate and set my working directory. Is there a setting that I need to re-activate to allow this? I can go into File-->Set Working Directory to do this but then the "Up one Level" button and others do not work. Have any of you out there experienced this, and if so, found a resolution?Thank you,James Westerfield

Can anyone give me a litte advice as to the best way to create a new logo in wf3? We have changed names again and all I have is the typical artwork to start off with.Any help is appreciated......thanks!

Does anyone know if it's possible to have both wildfire 4 and wildfire 2 installed on the same PC? We're upgrading to wildfire 4 and would like to leave wildfire 2 installed until the engineers are happy with wildfire 4.

Though the program is compatible with Vista, and my system has all compatible graphics, when i create shapes they do not appear on my screen until i change the camera angle etc, making it difficult to use the software as i cannot see, for example, what i am selecting, extruding or shelling Is this normal? Is there a way of fixing it? Thanks, Lauren

Hi, I want to do an extrusion diagonally to remove materials from a wing model. However the extrusion that i was able to do is all 90 degrees. Does anyone know how to solve this? Currently using pro engineer wildfire 2.0, education version as it is on the school computer. Thanks.

Hello everyone,Trying a new operation in Pro-E and can't find a way to get it done. I have logo work in a native Pro-E file. (a number of sketches, text extrusions, etc...) I'm trying to find a way that I can import that .prt file into another Pro-E file. Most other softwares I'm familiar with, this is a simple File:import.Does anyone know how I can do this in Pro-E?thanks in advance,greg

Is there a way to put a plane in ProE using plane equations (a,b,c,d)?

I got only one response to this, from someone who saw the same behavior inWF4. The solution was simply to open the folder from the previous analysis& go from there -- Lyle BeidlerMGS Inc178 Muddy Creek Church RdDenver PA 17517717-336-7528 Fax 717-336-0514 <">mailto:-> - <">http://www.mgsincorporated.com>

I am looking for a way to adjust the line width wider or brighter for selection or pre-selection--or any highlighted edges? I find it very difficult, sometimes, to see the highlighted edges or errors.

Please let me know Quad Core CPU system is best perfornance for Wildfire 4.0 than Dual Core CPU system? or is the same? thank you.

Hi all,Is there some way to assign temperature dependent conductivity properties in stand-alone WF 3.0?Joe ColichBoeing - STL

Found it:Format > Text Style Gallery -- Lyle BeidlerMGS Inc178 Muddy Creek Church RdDenver PA 17517717-336-7528 Fax 717-336-0514 <">mailto:-> - <">http://www.mgsincorporated.com>

In WF2, drafting mode: When I modify text style, how do I save the textstyle as a Style Name to appear in the pulldown at the top of the box? -- Lyle BeidlerMGS Inc178 Muddy Creek Church RdDenver PA 17517717-336-7528 Fax 717-336-0514 <">mailto:-> - <">http://www.mgsincorporated.com>

What are the build differences between Productview 9.0 release M040 and M060? Is it worth the upgrade?

I am on a team competing in the RWDC and I'm having trouble importing coordinates from a .txt file into pro/e, and I have no idea how to go about doing this. The coordinates below are what I'm trying to import, which is an airfoil profile. anonymous wrote:1.00000000 0.00000000 0.99799331 0.00036522 0.99198809 0.00145219 0.98202615 0.00323861 0.96816880 0.00569834 0.95048690 0.00881433 0.92920588 0.01237637 0.90451466 0.01645622 0.87648374 0.02123403 0.84556226 0.02680163 0.81180321 0.03308275 0.77537373 0.03996767 0.73699103 0.04733843 0.69648100 0.05519045 0.65449658 0.06339765 0.61134464 0.07179496 0.56702868 0.08033999 0.52256617 0.08829137 0.47741597 0.09585161 0.43302357 0.10200580 0.38857262 0.10745148 0.34555731 0.11138214 0.30356427 0.11408964 0.26313877 0.11529117 0.22456275 0.11508254 0.18814776 0.11339912 0.15455522 0.10978344 0.12344136 0.10437932 0.09543672 0.09649843 0.07075211 0.08608142 0.04950788 0.07367000 0.03190809 0.05965034 0.01796495 0.04519710 0.00803419 0.03097

Like it/hate it? I SHOULD have mine up and running this afternoon after dealiong with the usual NightmareLink issues. Opinions?Thanks!-------------------------------------------------------------------------------------------------------------------------------------------------------------------------Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.Dr. Seuss

Editor Al Dean was in attendance at the event 1/14 - 15 in Needham and was posting real-time updatesas topics were being presented: http://www.develop3d.com/labels/PTC%20Media%20+%20Analyst%20event%202009.htmlIncludes announcements about Pro/E Wildfire 5, new PLM offerings, customer case studies, etc.

thank you