Archive Read Only

I have 3DConnexion SpaceTraveler, it's work fine with WildFireII & III, but not with WildFire IV. Editing protk.dat file dosn't help. Any ideas?

Wondering what the tilt angle of the center of gravity icon designates when doing a model mass properties. Thanks Nelson

Hello,Looks like several folks are doing this with no issues.Thanks for all the replies!BenSecond Original Query:Hi, Well, I haven't had any responses, so I figure that I laid out the build sets too specifically. Let me re-phrase the question: Is anyone using Pro/E Wildfire 3.0 of a build earlier than M130 with Internet Explorer 7? If so, are you seeing any problems? Sorry for any confusion. Ben Original Query:

Hi,Well, I haven't had any responses, so I figure that I laid out the build sets too specifically. Let me re-phrase the question:Is anyone using Pro/E Wildfire 3.0 of a build earlier than M130 with Internet Explorer 7? If so, are you seeing any problems?Sorry for any confusion.BenOriginal Query:

Hello All,Is anyone using Internet Explorer 7 with Pro/E Wildfire 3.0 M080? Our data manager is ILINK 3.4 M030. IT is leaning on us to allow an IE 7 roll out. I thought we were OK with the aforementioned builds, but now I'm getting some info that says otherwise. I'm hearing that WF 3.0 M130 is the first supported build with IE 7. "Pay no attention to the man behind the Platform Support page" seems to be the word.Thanks for any info, and I'll gladly post a summary.Ben

Greetings All, How do we turn off web_browser_homepage in Wildfire 2. Just don't wantit to show at all. Thanks Mike

When i import files of autocad to sketch, qhen i want to exclude de small details apperas in red and give me problems and don´t let me extrude. i think that is a problem with the tolerances. Somebody can help me? Thank you.

I like to somebody tell me how can i make a list of break-down of a assemble in which appears the units of the parts ,and for example the width or other measure of the parts. Thanks a lot.

do you have literature about Proe evolution or about CAD sys hystory?? It's for my Degree thesis.. thanks

Hi Folks, A question for all you mature users of ProE. Back in the day there was only the ability to edit individual lines in a note (I think this was up until R200i but is was a such long time ago). At that time it was possible to individually set each line text height. Now in WF2 the text editing is generally much easier as you can see all the lines in the one box however I can't find out how to individually set one line to a different text height (ProE Help hasn't). I know it should be possible as I can see a note made back in R16 that has 2.5mm tall heading text and 2.0mm body text. In WF2 this shows up with the old brackets and note number as shown below and if I use the "Existing Text/ Select Text" in the editor I can see the text as different sizes however I cannot figure out how to initiate the process in a new note. {0:HEADING} Rest of the text The obvious thing of trying to add the brackets does not work, the editor just strips them out. The EDITOR button on the right hand

Can this be undone?

Dear Sir, i am try to soft ware setup is not run. Please said me how to run set up.

Hi all, What is the practical significance of modal analyis of a completly unconstrained body? Regards, Shankar

Can PTC create a Pro/Mechanica forum? It would help in trying to sort through the mechanica posts. I know I can search, but it just seems beter for Mechanica to have its own forum. Thanks, Steve

I'm wondering how I can change the information that the Audit Trail file outputs I would like to be able to control the rev and rev level. Thanks, Andrew

Many thanks go out to Roger W. & David P. for their assistance in thisinquiry!The originial question was : How do I add a symbol into the body of anote?The answer is : use &SYM(SYMBOL NAME) to include the symbol inside ofthe noteThanks!Nick

When I use a jpeg as a texture/decal, the image is repeated is youselect multiple surfaces. Is there a way to get this image to span thegap between surfaces (let's assume they're tangent surfaces)?I can "cheat" by mapping the 2 surfaces separately and moving/distortingthe image, but that's not ideal.Thanks,Matt GortnerCHASEDESIGN

Hey everyone,I thought there was a way to do this, but I can't find it...For a table cell with text set to "TOP" justification,How can you adjust the gap between the text and the top of the cell?WF2.0 M090Thanks,Don

This is not specifically a WF 4.0 issue but...if I want all users to be able to use the "send mail with object" button then how do I force it to use MS-outlook? For some reason it always opens up outlook express and I can't for the life of me figure out how to change it! Doing what PTC suggests (setting the default email program etc) has no affect, it still opens up outlook express instead of outlook.Any help is appreciated.

Does anyone know where I can find this font? Have a project that calls for this and I cant find it anywhere.Thanks for any help,David

Dear ProGurus,Anybody has steps on how to create custom proE library?/links?Can share on how do you control common parts files when we don have any proEdata management software...THanks in advance.

All,Does anyone know a cool website that I can cross reference Mil Spec numbers with description?For example: If I have a 10-24 screw, I'd like to see a listing of ms numbers.Thanks,WayneF

I hope this is an appropriate list to send this question to.Anyone out there using any sort of electronic software to record,manage, track and electronically sign-off on engineering change orders?We are looking for something and I was hoping others could share whatthey are using. I know that Windchill PDMlink has this capability but Iam also looking for other options. Simple options would be just as goodas the complex PLM packages.Any experiences good or bad on any products, including Windchill, forECO/ECN documentation and tracking would be greatThanks!

Hi Everyone,I'm looking for a CAD model for a Hand Held Products model # SR IT 4600 hand held scanner. Does anyone have a model available or can they point me to a location which might have one? Any help would be greatly appreciated! TIARich

Hello...what steps do I need to take in order to have the menus and everything else written in English (US) ?? I need to return the system back to its default configuration.thanksAlvaro