Archive Read Only

Pro-Gurus,I am looking for the triangular 3 arrow recycling symbol to use on a labelin Pro-E. If anyone has a symbol or can point me in the right direction, itwould be much appreciated. Thanks.Nick

To all, I have a college that is trying to get a partial view of a aligned cross section. WF2 will not let me do it. I cannot seem to figure out anything with Legacy, anyone have a suggestion? Best Regards,Mit freundlichen Grüßen,Atentamente, Mitchell SmithProduct/Prototype DesignerZF Sachs Automotive of America15811 Centennial Dr., Northville, MI 48168Phone: 734.582.8062 Fax: 734.582.8029 Main phone: 734.416.6200Mitchell.Smith@zf.com <blocked::mailto:mitchell.smith@zf.com>

Hi All, What is you experience with LCD monitors, using Pro/E. I have a couple of people trying them out right now on 17". They seem to be crisp and bright. The IT guy is looking at the cost difference between 21" LCD and CRT. I think the difference in power consumption and user comfort will offset the initial investment. Anyone do a long term affects report on ergonomics (i.e. eye strain) , energy cost, etc...?? Thanks in advance, Ozzie ScimiaSenior Mechanical Designer Bangor Metals Corp. - Brute Mfg. Ltd.1230 Balmoral Rd., Cambridge, ON, CANN1R 5Y2 T 519 621 4800 X-3281F 519 621 0295

users... I'm currently using an old Spacetec Inc. Spaceball 3003FLX that was newwhen I purchased it. Ever since day one, occasionally, the driver (yes,I have the latest one: 3.6.4 from 3DxConnexion and we are on XP Pro,still using Pro/E2001, but at some point will be going to Wildfire...)seems to be looking for the unit on COM2 when it's plugged into COM1, orvice-a-versa. Typically, I've just physically swapped the location ofthe connector and all was well. On my most recent workstation that onlyhas one serial port, it seems not to have this problem... at least sofar. I've only had this new system for a few days. This is not thatbig of deal, as I said, the problem is "intermittent" and I certainly donot want to give up on my spaceball, EVER! So, my first question is:anyone else seeing this behavior, and have you possibly resolved it? Furthermore, I'm thinking that maybe it's time to buy a NEW spaceball.My second question is what are you all using out there? Are they allbasically the s

Gurus:A couple of "table" questions:I select a tableRight clickWhat's the difference between 'copy' & 'copy table' ?Is there any "easy" way to make multiplecopies of a table besides copy & pasting multiple times?ThanksMike Singer

Thanks for all who responded. Mike

Testing of model post.

I can't seem to figure out how to do this.The menu mapper says edit > delete after selectingbut Delete is still greyed out.any ideas?ThanksMike

I'm trying to create an offset coordinate system, but the "Offset Type" drop-down menu is grayed out and non-selectable. Is there any way to make this menu selectable and therefore usable?

Why is it always the day before the holiday that the strange request happen. I have need for a 3d model of a 53 foot semi trailer as well as a truck (must have a sleeper) does anyone have one they could share. Or a direction where to fine one?

testing address> David J. Fitz> UTC Power / UTC Fuel Cells> South Windsor, CT 06074-2419 > E-mail: DJ.Fitz@UTCFuelCells.com>

testing

Testing

testing

How do I do this again?There is a setting, correct?I can't seem to find it.ThanksMike

The responses that I received have been helpful and I have given all your responses to my boss. I would like to thank all of those (with 1 exception) who responded to my posting. I have to admit that I am concerned that there were not more positive responses. I also think PTC should be seriously concerned about how the responses breakdown:5 positives, 3 that I would consider conditional but still helpful6 negatives1 salesman - because of reasons not applicable to this discussion, I don't accept anything said without verification from another source Just for the record, I don't need to 'talk to other companies this ex-PTC AE has gotten up to speed'. I judge a person by the quality of the work he (she) gives me. We have been extremely pleased with the quality and quantity of the his work. He has been a valuable addition to our engineering staff.1 idiot (2x) Regards,David A. Myers

I would like to thank all of those (with 1 exception) who responded to my posting. The information was helpful and I have given all your responses to my boss. I have to admit that I am concerned that there were not more positive responses. I also think PTC should be seriously concerned about how the responses breakdown:5 positives, 3 that I would consider conditional but still helpful6 negatives1 salesman - because of reasons not applicable to this discussion, I don't accept anything said without verification from another source Just for the record, I don't need to 'talk to other companies this ex-PTC AE has gotten up to speed'. I judge a person by the quality of the work he (she) gives me. We have been extremely pleased with the quality and quantity of the his work. He has been a valuable addition to our engineering staff.1 idiot (2x) Regards,David A. Myers

Hi everyone, I have tried to remove spaces in front of an Auxilary Seq &don't have any luck. Can you show me what I did wrong, this is what Ihave in my FIL CIMFIL/ON,PPRINTMESS=TEXT/CLWMESTXT=TEXT/'NC SEQUENCE COMMENTS'COLPOS=INDXF(MESS,MESTXT) IF (COLPOS.NE.0) THEN MESS=TEXT/OMIT,MESS,2 PPRINT/MESS ELSE DMY=POSTF(13) ENDIFCIMFIL/OFF In My tap file still output this comment with spaces but with the Filabove, it added an extra ( / ). N1 (/ NC SEQUENCE COMMENTS) Thank you. Thanh NghiCAD SupervisorFirst Technology Innovative SolutionsPhone #: 734-254-1261Fax #: 734-451-9549

I got a few hits on this one. I had the correct idea, just didn't knowthe method. Basically define the number of coils in the relation then set it up sothat pitch equals the defined length divided by the number of coils. Ifthis value ever equals less than the wire diameter then set the pitchequal to the wire diameter and the length to the product of the wirediameter and number of coils. Following is probably the best example given: Assume D0 is the length of the spring that will be varied, D5 is thewire diameter, D2 is the pitch, and you require 5 coils: I would createa parameter called COILS and set it to the number of coils you want. Thefollowing relations will change the pitch to follow the length and notallow the spring to be shorter than fully compressed: IF D0 < (D5*COILS) D0=D5*COILS D2=D5ELSE D2=D0/COILSENDIF Thanks to all who responded. This gives me a good starting point. Phil

Is anyone aware how to write mapkeys using environment variables?I know how to set path's and such using them, but also want to write mapkeys.Our company is setting up some outside contractors and we will be sending them our comfigurations. I do not want to tie them to a specific location if possible. If I could search using a variable they could put the files wherever they chose and map the variable to correspond.Any input would be greatly appreciated.

Does anyone know when Wildfire 3.0 will be released ?

I am inexperienced at FIL programming and have been having difficultyfiguring out the correct code. I would like to have the post do the following: If ncl is showing clamp/manual,on,on then insert m47 else if ncl is showing clamp/manual,off,off then insert m46 end if How do I represent this in FIL language. Thank you, Michael Wolf The information contained in this communication may be CONFIDENTIAL and is intended only for the use of the recipient(s) named above. If you are not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this communication in error, please notify the sender and delete/destroy the original message and any copy of it from your computer or paper files.

Hello all,I would like to extend a Pro/E TK application to read from an Excel spreadsheet on a Windows platform. Can you provide a technique or point me in the direction to accomplish this task?TIA,Bob Monat-- Robert A. MonatJerand Technical Services, Inc.http://www.jerand.comPhone: 317-875-6087 FAX: 317-875-6612 Tollfree(US)888-4JERAND

And what about concrete? Very often seen on a cross section, but still can't find a way to represent that MAT'L...Anyone has something they would like to share with the community?Thx,David"Michael P. Locascio" <proeman@insightbb.com>Envoyé par : -Phone: 2005-11-18 13:58Veuillez répondre à "Michael P. Locascio" Pour : PTC/USER 2D Products Discussion <-> cc : (ccc : David TESSIER/CATRC01/Power/ALSTOM) Objet : [draft] RE: wood cross-hatch fileYou need to let us know about this.Something tells me that wood grain is something you can apply whilerendering. However I have never seen a cross section for wood...yet.Michael P. Locascio