Archive Read Only

I don't suppose someone would have a .xch file that shows a wood graincross-hatch that they would be willing to share.I'm not even sure it is possible given the straight line nature of all thex-hatch files I have seen so far.Thanks in advance. Michael Hubbard

Hello, How can i recover the name of the model (&model_name) in a parameter. I tried with the relations but it doesn't work. Thanks

OK, I give up. The way I created 2d repeat regions in 2001 doesn't seem to work in WFII. Could someone out there give me a pick-by-pick?Dan SchurrCAD FacilitatorEATON Corporation13100 E. Michigan Ave.Galesburg, MI 49053tel: 269-342-3236fax: 269-746-6236-

Hi again:We identified the source of the PATRAN 2004/WF2 interface glitch. The folks at PATRAN replicated the glitch and recommended the later version of PATRAN. We tested the PATRAN 2005 interface and confirmed positive results. Thanks for your replies.Chris

How do you create a new breakout view in Wildfire 2.0?

Thanks for the replies.A co-worker figured it out for me. It seems that pro/E has a default height on a table cell of 2x the default text height. The default text height is set by: drawing_text_height .100 (or whatever you wish).So, having a text height of .1 will give me a cell height of .2. That would be .05 below the text, .1 for the text, and .05 above the text. If you change the text size after the table has been created, it does not matter. The default size has been set and so have the spacings.If you have a default text height of .15, you will get .075 below the text, .15 for the text and .075 above the text. Total cell height is .30.So, if you want a cell with text height of .20 and spacing of .075 (cell height .35), you need to create the table with drawing_text_height set to .15. This will make the cell height at .30. Having the correct spacing, you then change the text size in the cell to .20 and the cell height to .35.As always, with tables, the default size at the time of

Does anyone have a model of a chick vise "System 5" qwik-lok 1540.TIA

Hi All,Does anyone want to share a symbol for ANCE ?ThanksRaymond AlkerSr. Mechanical DesignerWallBox DivisonLutron Electronics7200 Suter RoadCoopersburg, PA 18036Mail : ralker@lutron.comPhone: 1-610-282-5230

Can anyone share a 3D model of a mini-PCI socket connector? Any help is greatly appreciated. Larry Kerila larry.kerila@netgear.com<blocked::mailto:larry.kerila@netgear.com> www.netgear.com <blocked::http: www.netgear.com="/> This e-mail, including attachments, may include confidential and/or proprietary information, and may be used only by the person or entity to which it is addressed. If the reader of this e-mail is not the intended recipient or his or her authorized agent, the reader is hereby notified that any dissemination, distribution or copying of this e-mail is prohibited. If you have received this e-mail in error, please notify the sender by replying to this message and delete this e-mail immediately

What is the best method of importing a company logo into a title block? Can the same method be used for both DWG and GIF files?

Does anyone have a determined list of materials they use forelectro-mechanical components such as connectors, dip switches, BGAs,etc. that they would be willing to share?Thanks, Tim Tim Sargeant | Sr. Staff Systems Engineer - MML Administrator | +1 563528 2557 | tim.sargeant@motorola.com

Hi all, One of my client is going to give data in IGIS format of which i have no idea ,could you plaese throw some light what it is. Thanks in Advance Pradip

Thanks for the quick replies guys. All answers were the same: Highlight any layer. Click Right mouse button on it and you should seesave status in that menu. Or from the top pull downs. View, Visibility, Save Status shouldwork as well FYI: View , Visibility, is the only place I saw for Isolating a layer I was still looking in then Layer pull down where you add a New layer. David HannebohnSeating EngineeringExt. 4243Workstation NAHOLLDO23997Location 2E01

The Company I work for just switched to Wildfire 2 from Wildfire. I cannot find where/how to save Layer status now. I checked the menuMapper and help but had no luck. Anyone out there that knows where they moved this command? David HannebohnSeating EngineeringExt. 4243Workstation NAHOLLDO23997Location 2E01

Hello all,I have a user from Germany who is on temporary assignment in the USA. He would like to use Pro/E with the German interface. I am not able to find help documentation on how to get his seat of Pro/E to display menus in German (and we have no maintenance in force either). Any help would be appreciated.Thanks,Chris

To all, How do you increase the accuracy of the imported points? I have points of a blade that are 4 decimals accurate. When import the XYZ of those points offset from the CYS. I get 2 place decimals.Best Regards,Mit freundlichen Grüßen,Atentamente, Mitchell SmithProduct/Prototype DesignerZF Sachs Automotive of America15811 Centennial Dr., Northville, MI 48168Phone: 734.582.8062 Fax: 734.582.8029 Main phone: 734.416.6200Mitchell.Smith@zf.com <blocked::mailto:mitchell.smith@zf.com>

Hello,I got two reactions, see below. They indicate that there is no real problem, although external copy geoms incorporate a higher risk for CRC's. In the meantime, we continued our tests, and didn't find a good reason to avoid external copy geoms.Thanks, Hugo.

Hi all, i want to ask that is it possible to to add features to a local group which has been patterened.

Thanks to all. I had always been told not to use anything but certified drivers with Pro. Turns out by upgrading to the latest driver this fixed my Pro display problems as well as problems with my Microsoft Office. Hard to believe that PTC is so far behind in certifying drivers and when they do they certify problematic ones at that.DwayneDwayne QuatierGE HealthcareUltrasoundProduct Development EngineerOEM Engineering LeaderT 480-222-7003F 480-760-2489E -www.gehealthcare.com365 S. 52nd StTempe, AZ, 85281, USA

Is there a way to make sketched lines, circles etc move with a particular view?Thanks in advanceJeff

Does anyone have wires that they made or the best method to make them. TIATerry

Hey all,How do I "explode" a symbol in WF2?ThanksMike

Thanks to everyone who replied!!! got it to work great!