Archive Read Only

Is the limit to model accuracy still .0001? I'm on 2001. Thanks.

(Wildfire 2003490)Could someone please explain what a 'null component' is? I was using AutoPlace with a pre-defined Component Interface. It returned no possiblesolutions with 'Max positions' set to 5 or All. When I set it to 0 andpicked a point I was able to 'Apply' and OK. Now the component shows up onthe screen but not in the model tree, and it is selectable but will notdelete. 'Model Info' says: Type - NULL and Status - NULL.Thanks in advance,Joe

I just got the authorization for purchasing new video adaptor for oursystems. I am looking at purchasing the 3Dlabs Wildcat VP880 Pro. Arethere any problems with this card that I should know of? Will it work withPro 2000I^2?Thank you very muchDenis Leclerc, Mechanical DesignerXLTEK(905) 829-5300 Ext 304dleclerc@xltek.com

Hi all,I am using ProMessageStringRead() to get the Yes or No valueBelow is the portion of code // Prompt the user to enter some value, include default in message status = ProMessageDisplay (MsgFile,"USER Do you want to add ?[N]:");// Get their answer and check the return value ProName w_answer; char ans[8]; status = ProMessageStringRead(8,w_answer);This works fine but problem is when I am running thisIt shows the first message in Prompt message correctlybut instead of showing Yes / No buttons it shows tick mark(yes) / cross mark(no)The text file contents are as below.%USER Do you want to add ? [N]:Do you want to add ? [N]: ||| No## So any Idea for this?RegardsPankaj

Does anyone have any experience with running Productview on a CitrixEnvironment?Is there any documentation available?Thanks,Joe MeikleSr. Product EngineerCad AdministratorTeleflex Morse Motion Systems Inc.640 North Lewis RoadLimerick, PA 19426Ph: 610-495-7011 x 277Fax: 610-495-7688jmeikle@teleflex.com

Thanks!  Here's the mapkey: mapkey mtl #MODIFY;#TEXT;#TEXT LINE;Doug Schaefer

Hello,I know this has been posted before, but I can't find it in the archives.  Can someone share with me the legacy command sequence mapkey for 2001 that will allow the editing of a single line of text like you could in 2000i2 and before?Thanks,Doug Schaefer

I have a unit that is bolted down into a vehicle. The unit has a mass of45 kilograms and is around 500mm wide x 300mm high x 450mm deep. C G atcentre.The unit is attached to the vehicle by means of 450mm long aluminium anglebrackets running along each side. These brackets are approximately 50 x 60x 4 mm thick. Each angle bracket is attached to the vehicle using 3 offvertical M6 steel bolts. The vehicle is assumed to be very stiff.The unit is subjected to g loads of 7.4g forward, 2.25g sideward and 4.4gupward.A quick calculation, making simple assumptions, and with just the 7.4gforward load gives a shear stress of 7.4 x 9.81 x 45 N / 120 mm^2 = 27.2N/mm^2.When a shell model is constructed and run in Mechanica, with spot weldsrepresenting the bolts, the results give a shear stress in the rear boltsof 600 N/mm^2, or almost 20 times the simple calculated value.On the basis of the analysis results the owner of the vehicle wasinformed that his 6 bolts were inadequate, but he wouldn't buy it.

Original question:ProE Version 2001How can a note be created that attaches to the cross section arrows in a view?The logic is to create a note, no leader, offset, make noteorright click on the note and just add the extra text to the section letter.But it doesn't work that way.The only way I can do it is by creating a free positioned note and relating it to the view.SUMMARY:The few replies that I got pointed to use "Relate Object" under the Tools command.TOOLS, RELATE OBJ, ADD ITEMS this will allow you select your A and than select your Sheet 3. Once this is done try to move your A and notice that the text moves with it.I tried it but it doesn't work on my Pro 2001 product build 2003010.Thanks for your help.Ronnie Shand

Can anyone recommend any Software that would provide a library of StandardElectrical, Pnuematic, and (or) Hydraulic symbols to be used for importwithin RS Designer?

Is there any way to put a 3D model into a power point presentation andhave it automatically spin or manually?Thanks,Marty

Dear ProE Users,ProE Version 2001How can a note be created that attaches to the cross section arrows in a view?The logic is to create a note, no leader, offset, make noteorright click on the note and just add the extra text to the section letter.But it doesn't work that way.The only way I can do it is by creating a free positioned note and relating it to the view.Any better ways?Thanks in advance,Ronnie Shand

I'm having trouble getting the ProInfoWindowDisplay to actually open the window in a location other then {0.0, 0.0}I have the code as shown below...######################ProInfoWindowLocation win_loc = {0.5, 0.9};ProInfoWindowSize win_size = {30, 80};ProInfoWindowDisplay (woutput, &win_loc, &win_size);######################The window displays fine, just only in the {0.0, 0.0} position.Why isn't it moving?Thanks, John

I want a rep of my assy of only the exterior parts, so I create a rep withdefault rule of exclude, go to definition rules, select action as master,select geometric and exterior comps. I hit update and ok. It does what Iexpect. I get a rep of just the exterior parts. I erase not displayed toremove the inactive parts from session. If I regen the assy the inactiveparts are back in session. If I open the assy by rep (w/o anything insession) the entire model is in session. Why do the inactive parts keepcoming back into session? Is there a confing setting? What good is thisrep if I need the whole model in session?

Sim'ers, Having spoken with the customer again today, I have more explicit questions. 1. The customer wants to know how to read in strain gage data, and possibly with length of time in the data samples, and assign each gage location to points on the Pro/ENGINEER model. 2. The customer wants to generate color fringe contour plots of read-in data. 3. He also wants to know how to run the rainflow analysis provided in Fatigue Advisor. I realize that there aren't very many of you out there who have much experience with Fatigue Advisor, so all and any help is greatly appreciated. I will post replies. THANKSRandy Speed, PrincipalSpeed Consulting, LLC2871 Howard RoadWaxahachie, TX 75165(972) 938-0490 ph (972) 937-2319 faxwww.speedconsulting.com

Thanks to everyone who responded.Original Question:I thought I saw in that in Wildfire 2.0 you could save back to an earlierversion of ProE such as 2001. I assumed this would be under Save a Copy, butI don’t see the option. Anybody out there have any ideas.

I thought I saw in that in Wildfire 2.0 you could save back to an earlierversion of ProE such as 2001. I assumed this would be under Save a Copy, butI don’t see the option. Anybody out there have any ideas.TIA,Brian WilsonMechanical DesignerParagon Technology, Inc.

I am working on the Company Logo with lotsa Splines. I'm creating it as aSketch (.sec suffix) so that it can be imported, scaled, and rotated.Should work nicely, it has before. Unfortunately, on one particular logo,once I have positioned and scaled the sketch, I select the check mark, andpoof "DEGENERATE SEGMENT ENCOUNTERED". Pro\E gives no indication of whichsegment has "degenerated". Does anyone know how I can find the segmentthat causes this error?

Or HELP, HELP CENTER, MENU MAPPER, among the other tools.-- Rui"Sukhesh Shetty" <sshetty@fstoolcorp.com> wrote in message

Thanks to all, I got about a dozen answers in 15 minutes.

Sorry about the message overload, the prev message had no subject line

  Hello to all, Can any one help me how could I modify the View Breakout position.I had tried the modofy view> BouundryThanks in advanceRahul

I have done this in the past but can't remember the correct techniques.Can someone please describe the techniques for creating an Axial Cam?Thank You.

I am trying to create push button names read from some other file otherthan menu_fil.mnu. I am trying to follow an exaple provided by PTC inwhich I think they are doing this. What am I doing wrong (if we can evendo this). Thank you.-David SchmitzIngenium Product Developmentchar TempName[PRO_LINE_SIZE];strcpy(TempName, "TempName");ProMenubarmenuPushbuttonAdd("label Working Dirs", "label Dir1", TempName, "DirHelp Help example.", NULL, PRO_B_FALSE, cmd_1, mnu_file);

Just curious as to who the instructor is. We used the MDSI software back inthe 70's and I knew a lot of the people in the company.