Community

I am using Creo Parametric Release 9.0 and Datecode9.0.8.0While running edit command, Creo window get freeze and can't change the numbers

Working on a decent sized harness with around 2 dozen connectors and have routed all of it in 3D with coord systems and networks. In the past with smaller harnesses I have been able to manually put in the number of pins in the components tab and then in the pins tab add in the entry port, regenerate the assembly, go back into the parameters and the PIN ID and Cable name have automatically been populated. (Not using Cero schematics anywhere all manually routed) Just as a quick test for this harness I picked a few connectors to make sure everything was working and followed the same process above and the pin ID came in but the cable name did not. My question would be why is the cable name not coming in? My first guess would be that i need to fill out the entry port column for every single connector ( with that then do I need to do that for every port or just one per connector?). My other guess would be I am missing a step somewhere in there and something is not connecting correc

Has this been tested with Creo? Thanks

A user recently got a new computer with Creo 11.0.3.0. They noticed that their "shortcut" to Pro/Library was missing on left hand side of the Creo Browser underneath Common Folders. We looked into their config.pro and saw no issues. The pro_library_dir was even defined as it is on all other users' computers also running Creo 11.0.3.0. I even changed the setting on the config.sup file on their computer and that failed to make the Pro/Library shortcut show up. Has anyone else ran across this issue and what steps would you take to make the shortcut show up?Below is a picture of how it shows on my Creo Browser.  

I need to write this equation this way > however the left part can't be written like ( 1/k)Thank you  

Hi there I tried to input the results from another mathcad file , but I guess I'm doing that wrong > in the following image I'm trying to import the results of ( R) What is the correct function to import the results from one mathcad file to another?When I searched in the community I found very old version which doesn't open in my laptop ThanksYusra 

Version: Windchill 12.1 Use Case: During Windhchill 12.1.2 installation in PSI installer we are picking Windchill 11.1 empty DB schema, But it is failing at data loading stage at 63 % progress. kindly suggest some workaround. do we neeed to alter the windchill 11.1 DB schema to fit with windchill 12.1.2 please guide.Description: During Windhchill 12.1.2 installation in PSI installer we are picking Windchill 11.1 empty DB schema, But it is failing at data loading stage at 63 % progress. kindly suggest some workaround. do we neeed to alter the windchill 11.1 DB schema to fit with windchill 12.1.2 please guide.

I am using ThingWorx Platform Release 9.2 and DatecodeSP2We need the downloadable installar of Thingworx PostgreSQL 9.2.1 version for one of our paid and valued customer. The customer's previous version where the live project was deployed was 9.2.1. Now the license is expired. When the customer has purchased a new license, we have found that it only contains versions 9.4 and 9.5. We have installed the version 9.5 and the existing project is not being imported properly. Possibly the upgradation process was not performed properly. So, we need to revert it back to the old version - 9.2.1 and then retrive and deploy the project first and then within 4 days of trial license we'll try to apply the license once again.Please provide me the link from where I can download the 9.2.1 version of Thingworx Foundation for PostgreSQL.

I am using Creo Parametric Release 10.0 and Datecode10.0.7.0I have a user asking about defining a default simplified representation in a non-assembly model, is there a default simplified representation in non-assembly models? I have not been able to find default simplified representations in anything but assembly models.

I am using Windchill PDMLink Release 11.1 and Datecode with CPS M020-CPS11Hi Team,There are multiple folders present in a Product and data in these, need to delete all data resides in all folders expect one folder. How to achieve this ?

Hello,I would like to have an assembly file which contains a box and many of a same part. Like a box full of bolts. Is there way to assemble those parts in not a particular manner but rather in a random way? An example picture is shared.Thank you. 

I am ready to engrave some words on a surface using extrude function. The code list below, but seems the specified font did not  work. I checked the feature created by this function, the font is still font3D. How can I use other font? double height = 10.0;pfcPoint2D_ptr firstCorner = wfcCreatePoint2D(-25.00, -25.00);double length = 48.764;pfcPoint2D_ptr secondCorner = wfcCreatePoint2D(-25.00 + length, -25.00 + height); wfcSectionEntityText_ptr text = wfcSectionEntityText::Create(firstCorner,secondCorner,content); text->SetFontName("cgomg"); // use font cgomgwfcSectionEntity_ptr textEntity = wfcSectionEntity::cast(text); sketch->AddEntity(textEntity); sketch->SetIntentManagerMode(true);sketch->SetIntentManagerMode(false);  /* Redefining the feature */extruFeat->RedefineFeature(0, extractedTree, featOpts, regenInstr);

Version: Windchill 12.1 Use Case: Trying to get arbortext to work with WindchillDescription: I'm having an unusual issue. We are starting to use arbortext with our Windchill system (version 8.3 and 12.1.10) and there some odd behaviors. Initially, when I open the application and try to check an object into the server I get this error:The autonumbering feature should be enabled for "WCTYPE|wt.epm.EPMDocument|com.acme.us.DynamicDocument" soft type  It does that for any PRODUCT context or Library. However, if I connect to a PROJECT workspace and checkin the object it works. The weird thing is, it started at 000000032 and increments by -1 every time I create a new object and then it allows me to check in objects into product or library workspaces. Hours later, I attempted again and this time it started at 000000042 and started going down. Here is my OIR for the "Dynamic Document" type  <AttributeValues objType="wt.epm.EPMDocument"> <!-- set the fold

Hello community, I have this problem:"How could I program it to sum 3 consecutive values in a vector (m), with the condition that the sum is performed only when there are exactly 3 consecutive values; otherwise, the result should be an empty string ('').""What I’m trying to do here is: in vector (a), if there is even one false, the result should be false; but if all values are true, the result should be true." 

I am using Windchill PDMLink Release 11.0 and Datecode with CPS M030-CPS22你好，我需要把windchill数据库从Oracle迁移至SqlServer，请给我11.0 M030版本的PTC Windchill 11.0 Oracle to SQL Server Database Migration Tool下载地址，最好把11.0相关的下载都打开，迁移过程中可能还要用到其它包和工具

when i open creo its says "You must register the Quality Agent in order to continue running Creo Parametric Student Edition (for educational use only) in Tryout mode; if you do not, Creo Parametric StudentEdition (for educational use only) will shut down.Do you want to register the Quality Agent?" 

PTC says this can't be done, so I'm appealing to a higher authority. Put simply, I want to use repeat region relations to compare a parameter in each member to the number of the drawing. PTC Tech Support says there isn't any way to reference information about the drawing from within the repeat region, but that sounds like a terrible gap in functionality, is it really true?

I’ve created a collection mashup that contains two cells, each with a label. I want to configure navigation so that clicking on a specific cell takes the user to its corresponding target mashup. how can i acehive this?

Hi community,   we were want to develop drag and drop functionality in "Grid Advanced" widget as part of Thingworx Extension widget.   Background: 1. Thingworx version-8.5 2. Drag and drop item or row from one table or panel to other in view mode of Mashup. 3. wanted to develop as extension widget. 4. widget "Grid Advanced" table rows, can be develop as drag and drop functionality in Mashup(view mode)    Inspired by below post: https://material.angular.io/cdk/drag-drop/overview   I have few queries below please address those: 1. Is it possible to create drag and drop functionality in existing or new widgets. If yes then what the way to achieve.  Example: Drag one row from one widget(Grid Advanced) to other widget table in mashup (view mode). 2. Is it possible to develop this "Drag and drop" functionality as extension widget. If yes then what would be the way. Example: Drag selected field/box from one panel/table to other in mashup (view mode).   Enclo

Dear all, I have a problem with the step range. I want to prevent the value 0.50 from appearing in the first term of the function f(x1), according to the first method. I tried using the `last` function, but I can't get it to fit the vector x1.I have Mathcad version 11.Any suggestions?  

PTC community,Is there an auto save option in creo?  After a certain time or key strokes.  My pro-manufacturing guys were wondering so I thought I'd look into it.  I thought maybe a config option.Please help me out.

Version: Windchill 12.1 Use Case: Query Builder. Build a report to export the latest revision and iteration of a specific view.Description: We work with Manufacturing Views and I try to have a report able to get the document related to a dedicated View. I.E. Design, or one of the different branch.If I include in the criteria the Latest condition and the Branch idendifier the results is only to the latest modified View, but I need to have this for a specified view. Any idea? Best regardsGianpaolo  

I am making requests to /Windchill/servlet/odata/v4/DynamicDocMgmt/DynamicDocuments and need to interact with potentially thousands of documents. What we have found is the $top parameter doesn't override the server's page size limit. I also tried a header odata.maxpagesize=1000 but that didnt help either. Any ideas on how to adjust the number of results returned from the API?

I have requirement to search object using queryspec which can have number with leading zero(to make it 8 digit length) or without leading zeros.e.g. I am to search object number 66, query should be able to find object 66, 066, 0066 etc. I got regular expression to search( ^0*66$ ) need to know how to use in queryspec.

Hello all, I want to validate a specific IBA on Change Request creation. This IBA is multi-valued and has enumerated values, let's say A, B, C, and D. So, when the user selects A and B both at a time, it should give an error. All other combinations should work fine except this A and B both together... I have written a JS function and placed it in create.jsp of the change request and tried to call this in my custom action file using action as a wizard step, something like below... <objecttype name="changeRequest" class="wt.change2.WTChangeRequest2" resourceBundle="com.ptc.windchill.enterprise.change2.changeManagementActionsRB">      <action name="defineItemAttributesWizStep" afterJS="validateMyAttr" id="defineItemAttributesWizStep" preloadWizardPage="false" required="true" resourceBundle="com.ptc.core.ui.componentRB">          <command windowType="wizard_step" /> </action> </objecttype>&n