Creo (Previous to May 2018)

If anyone is in need of a high quality suit, here's a website, I bought six suits from this place.....TOP OF THE LINE, these suits retail for over $800 at the malls. Pure wool, super 150's, better than anything you will get at Macy's etc. at 1/10 the cost. http://mensitaly.com/ Every mow and then you'll have to wear a suit to work office parties, ect. You will look like a million bucks in one of these. These suits are by far the best I've ever owned.

Not if, but when?

All,I am having an issue with a system here. I have had two user log in andthey are both unable to create an operation in the NC environment.Whenever we try to define a work cell or operation it becomes visible inthe model tree, but we get an error saying that the operation has beencancelled. Has anyone else seen this behavior or better yet have aresolution to it? ThanksBrian

Hi. I'm trying to either convert this file to a CAD format file or load the file, trace the geometry then save as a CAD file. Any suggestions? Thanks, Wayne

I've downloaded the software wildfire 4.0 M092 and unzip all the files. But the setup file isn't working. What should I do?

If you do aFlat/Recursive Item on the parts list. Will that affect your balloons?

When activating a subassembly, the command Edit - Component Operations - Megre is grayed out. Is that the supposed to happen? The command Insert - Inheritance (or Merge) is not what I want. Using Wildfire 4 M050 - Thanks.

I need to import .SAT files (ACIS) into ProE WF3. These come from a FARO arm (probe). I can only import the planes, but lines and points don't translate. Anybody can help?

Wie stelle ich sicher, dass Schnittansichten (3D) abgespeichert werden ? Jost Becker

Happy Friday everyone! I know many of you are anxiously awaiting the availability ofPro/ENGINEER Wildfire 5.0. (If you aren't - check this out :

Hi all I have a basic problem , I want to creat a text with vertical orientation , If you have the solution , can you teatch me Many tahnks for your help Olivier

Hi,Would anybody have a Model of a Kurt AngleLock Vice model D688 they would be willing to share?Bob Rizzari

Morning all,The subject says it all. Trying to change thickness of line entities and text in a sketch. Thought the natural place to do this would be in the Line Style.Thanks for any/all suggestions!David

I have a file that has extruded text, when I try to change the text I get this error. "Font avgcbol_.ndx can not be loaded." Where can I find this font file avgcbol_.ndx? Thanks,Jim

Hi, can someone tell me how you go about doing a transition piece.I have a circle 500 mm diameter translating to a rectangle 1000 mm x 2000 mm separated by a distance of 5000 mmTIA

I have downloaded the 3DWin5 software and had no success. Does anybody know of any good software for this process, or tricks to using 3DWin5 Thanks, Hanson Jones

GurusAnyone been running Windchill R8 M040 with Wildfire 4, if so any issues orproblemsI know from the Software Matrix that this is not supported but I feel this isa way forwardI want to upgrade to Windchill r9.1 and Wildfire 4 so it is a chicken and egg situation, WF2 is not supported under R9, WF4 is not supported under Windchill R8 M040So I can pay for an upgrade to R8 M050 then I can do WF4 then pay again for teh MIGRATION toR9.1What I would like to do is run WF4 for a short while then do the R9.1 upgrade so the users do not have 2 new things to cope with(Yes I am a considerate Sys Admin)Any advice, help, knowledge etc please pass my way

OK EVERYONE!!!! I get it. (I must have received 100+ responses on this one). Thanks for the help.Use win32_gdiPatrick Williams | Sr. Applications Engineer | Engineering Systems | Steelcase Inc. | 616.698.4078 | My Site<">http://my.steelcase.com/Person.aspx?accountname=NA\PWILLIA3>[cid:image002.jpg@01CA03A0.F77A2B70]

GurusAnyone been running Windchill R8 M040 with Wildfire 4, if so any issues orproblemsI know from the Software Matrix that this is not supported but I feel this isa way forwardI want to upgrade to Windchill r9.1 and Wildfire 4 so it is a chicken and egg situation, WF2 is not supported under R9, WF4 is not supported under Windchill R8 M040So I can pay for an upgrade to R8 M050 then I can do WF4 then pay again for teh MIGRATION toR9.1What I would like to do is run WF4 for a short while then do the R9.1 upgrade so the users do not have 2 new things to cope with(Yes I am a considerate Sys Admin)Any advice, help, knowledge etc please pass my way

is there a way to stop the model from moving out of view when redefining?

PRO.E其实有些缺陷，先说å‡ä¸ªå�§ï¼Œä»¥å�Žæœ‰æ—¶é—´æˆ‘会慢慢的补充完的： （声明：ä¸�是讨厌它，而是希望官方能将自己的软件更完善化） 1.在扫æ��时，它æ—法将三维曲线和二维曲线（是è�‰ç»˜çš„）å�Œæ—¶é€‰æ‹©èµ·æ�¥ã€‚ 2.æ—法将一æ�¡ä¸‰ç»´æ›²çº¿æ—‹è½¬æˆ�一个曲é�¢ï¼ˆè¯•è¿‡ç”¨æ‰«æ��命令，但有很大的局é™�性，而且很麻烦。这个UGå°±å�¯ä»¥ï¼‰ 3.如何å�Œæ—¶å°†è®¸å¤šé�¢æ›¿æ�¢åˆ°ä¸€ä¸ªé�¢ä¸Šï¼ˆæ¯”如一个长方体，一个侧é�¢è¾¹å€’上R角，就ä¸�能把这些R角å�Œæ—¶æ›¿åˆ°è¿™ä¸ªä¾§é�¢ï¼ŒUG也å�¯ä»¥ï¼Œä¸�懂UG的，å�¯ä»¥é—®ä¸€ä¸‹å‘¨è¾¹çš„å�Œäº‹ï¼Œç›¸ä¿¡ä¼šæœ‰å¾ˆå¤šç”¨UG的朋å�‹ï¼Œå°¤å…¶æ˜¯å�šæ¨¡å…·è®¾è®¡çš„） 4.从4.0开始，打开分æž�中ä¿�存的厚度分æž�时，æ¯�次都è¦�从头自动检测分æž�一次，é™�低了 è¿�行速度。

I just downloaded the free software and installed it. But I can't get it to run. Any suggestions?

ProE Users,Would anyone happen to have a Pro/E Model of an ISO container with standard doors that they are willing to share? We are looking for something along the lines of 20' x 8' x 8.5' Tall.Thank youBrian MoralesSandia National LaboratoriesAlbuquerque, NMOrganization 2995-1 Mail Stop 0625Phone 505-844-5762

Dear Users, I'm having trouble knowing how to access the ProE archives. I'm interested in knowing what's been said about the ProE hole tool. Thank you, Fred Fred Renner Designer/Drafter Applied Engineering, Inc. 3300 Fiechtner Drive Fargo, ND 58102

Guru's, Occasionally when merging two parts Pro/E will give me an error tellingme to change one of the parts to some new accuracy value OR to useabsolute accuracy. I've somewhat blindly always just followed ordersand changed whatever it told me to. I am wondering if I would be betteroff going to the absolute method instead? Would I simply change the twoparts to the same absolute accuracy value? And would it matter whatthat value is? Any thoughts? Please respond to the list to maintainthe thread... thanks in advance... Paul Korenkiewicz FEV , Inc.4554 Glenmeade Auburn Hills, MI, 48326-1766