Networking and More

This is a zipped up folder with the sub assemblies and assembly of the Happy Clapper mechanised toy.  Feel Free to share.

Has anyone had a chance to see the new customer vidoes we (PTC) has produced with some of our customers from around the world? They're documentary style, and focus on how manufacturers are delighting their customers, and how PTC helps.My favourite - the KTM story.     What do you think of the customer stories? Which one is your favorite?   You can watch them all at www.ptc.com/go/customers   Cheers, Geoff

I'd like some guidance updating a stylesheet from 5.3 to either version 5.4 or 6.0.     I have used the update stylesheet utility. This seems almost turnkey; however,a limiter is that this stylesheet was customized for MathFlow/MathType equations.       I've gone through the process several times. I get a couple of errors, not an ovewhelming number. I can list them later if you like.     Now it seems that even after saving the stylesheet, when I open a dita file again, an error message appears saying that the stylesheet is out of date. So this seems to be an endless cycle.     Is there anyone familiar with this?     Thanks,   Katie

Hello,   Can anyone tell me if it's possible, after generating callouts for an assembly in Arbortex Isodraw CAD Process, to create a table in the canvas listing the callout numbers and the part names?   Regards, Ana

I want to reverse engineer a part. I had our QC technician measure the part using the Romer Measuring Arm. He sent me a step file. The step file was in 3-d. However, it only had circles and lines at elevations. It didn't have any surfaces. Is there a better format that should be used? iges maybe? Has anybody had success trying to import files created by a Romer Measuring Arm?

Hello all,I'm a faculty member at Murray State University (Murray, KY) and I'm teaching design courses with Creo. I'm intesested in participating with local user groups and I was wondering if St Louis group is an active group or not.Thanks,Emre BahadirDepartment of Engineering, Engineering Technology, and PhysicsMurra State UniversityMurray, KY 42071

We are looking to add Vendors and presentors to our meeting agenda for 2013. Dates of the meetings are March 14, July 18 and Nov. 7, 2013. We have between 100-200 engineers and managers attend. According to PTC and PTCUser we are one of the top 3 RUG's in the country so please come join us.   If interested please contact board@nopug.org.

2013 Vendor Letter

March 13, 2013 Newsletter

Hi all,I have an activity in a custom workflow which has two routing options yes and no.There are two roles associated with that activity as participants.They give their votes as yes or no.All these votes go to the creator in the next activity and the creator resends the task to only that person who has given his vote as yes. and any other participant who has given vote as yes should not get the task back. So how should i go about it..iam trying to write an expression to get which participant has given which vote but iam not getting any method for that in workflow.Please help me as soon as possible.

Sir,let me explain the senario,First we created EPM document using java program and created WT part using “windchill wt.load.LoadFromFile –d c:\PTC\dummy\part.xml - CONT_PATH /wt.inf.container.OrgContainer=AL/wt.pdmlink.PDMLinkProduct=H4” script(OOTB Script).To make connection between WT part and EPM document we used “windchill wt.load.LoadFromFile –d c:\PTC\dummy\partepmlinkloader.xml” Script.Now the problem is WT part and EPM document associated under context relationship. Because of that not able to change the revision ,state for the WT part.Normally WT part and EPM document should have owner association. So we request you to suggest how to change the association from context to owner. Matter is urgent we migrated almost 17000 parts.For any clarification please call me at 9841723216 or mail to vsiva.alvvc@ashokleyland.comRegards,V. Sivakumar.

Just wanted to see, how long, You all, and Yea, I'm from TX...lol have been using the software....   I have been using it since 1996 ... 16 yrs....and loved it....

I am posting this on both the Pro/E System Admin. forum and the Windchill Admin. forum.I am both the Creo System Administrator and just recently the Windchill System Administrator. I wanted to know if my poisition is unique or if others are in the same situation as me.I know each on their own can be a full time job but I manage a smaller group of Engineers and only 2 locations with 24 users total. I just started with Windchill and currently migrating data to it, so I don't know how this will work out in the end for me.Is it possible to be the Creo and Windchill Administrator for a smaler group of users without loosing my mind? I seem to think I can accomplish it but wanted to hear from others who are in the same position.Thanks"Too many people walk around like Clark Kent, because they don't realize they can Fly like Superman"

Hi everyone...Just a quick update. I've confirmed a great centrally located meeting space for the inaugural meeting of the Chesapeake Regional Users Group (CPUG). The meeting will be held at the brand new Miller Branch of the Howard County Library. This is a very large, modern, professional meeting space with projection capabilities, WiFi, and seating for up to 300 people. A map of the meeting space can be found HERE. The address is below:Miller Branch9421 Frederick RdEllicott City, MD 21042Phone:  (410) 313-1950I'm working on invitations to the event for all area companies using PTC products. Once we have a rough tabulation of how many attendees we'll have, I'll firm up the meeting date. Currently I'm looking at a Thursday or Friday morning in the early December timeframe. Given that this is our first event, I wanted to limit the meeting to a half-day. Registration will begin at 9am and is free to all attendees. A tentative agenda follows:9am: Free Registration Begins9-10am: Meet

Hi,   I am new using ArborText PE.   My problem is the following:   I have received a project with the structure:   - configure (.acl files) - doctypes (A catalog with .atd, .cmd, .dtd, .fos) - documents (My sgm file) - entities (.CFG and .ENT files) - ifos (All the portions of ArborText Style)   Firstly, I don't know how to import all this files into the ArborText PE.   The finallity is if I could use the template into doctypes/dm/5.4/dm_descript_aecma180/dm_descript_aecma180.fos (inside the file, there are all the fos styles)   I tried from the menu Format/Select Stylesheets and selecting the dm_descript_aecma180.fos but it doesn't run.   Can Anybody help me, how to configure all that files in ArborText PE?   Regards.

Hello,   Does anyone know how you can create nice images which I can use for my home made toolbars inside IsoDraw, and which software or drawing package is a helpfull tool for this? Besides I am curious to find out where the standard images are hided inside IsoDraw.   Thanks you.

Hellodoes anyone know where to find a replay of the Virtual Corporate Visit Webcast held on last thrusday. Speaker was PTC CEO but also PLM Manager of SRAM.Thank youBest regards

Windchill PartsLink enables the construction of a hierarchy of classification nodes but applies this to WTParts. This functionality would be very powerful if applied to Dynamic Documents to support reuse of information... helping users find what already exists and is available for use.   http://communities.ptc.com/ideas/1744

Hi,   I am working Isodraw 7.1, I want to create New Arrow heads for Callout 10*5 mm. Default arrow heads are started from 20*20 mm, How can I create 10*5 mm Head.   Any one known that please let me know.

Hello Friends,   I have more 3D .pvz models, After Explode the parts every time I have place the callouts manually. I know how to Generate the callout automatically, but while I use this way generate more callouts for all parts. I would like to give callout specific parts.   If anyone know let me know how to give the callout specific part using "Automatic callout generate option".

From the ashes of the defunct MAPUG (Mid-Atlantic PTC Users Group) and the VA/DC area user's group, we're launching a brand new RUG- the Chesapeake Regional Users Group (CPUG). This group will focus heavily on the Creo (ProENGINEER) and Windchill PTC products. Multiple meetings will occur each year with the first beginning in Fall 2012. So what happened to the old groups? In my personal opinion, the previous RUGs in the mid-Atlantic region suffered from a severe case of "mission creep". Meetings lasted for hours on end and served no purpose other than as an extended sales pitch and a cash grab. At the last MAPUG meeting I attended, I paid admission at the door. This was followed by a torturous 2 hour demo of Wildfire 4 and 5 given mostly via an endless powerpoint slide deck. Eventually I was let loose to grab lunch but in the lunch area I was literally surrounded with vendors on all sides. After lunch, I gave a brief presentation and then sat down for another long demo and then finall

Dear Friends,   I am new for Isodraw macro's. Please any one guide me, How to create Isodraw macro and .ism file.   There any software using to create .ism file?

(fill in your own blank)....you are asked to design something that you know absolutely NOTHING about?*headdesk*

For when you need a break from the daily grind, The PTCooler is your place for general discussion about your day, vto vent about what really grinds your gears, to tell a joke, or chat with your peers about whatever you want.A big thanks to KrisR for the suggestion and for coming up with the group name.So go have some fun with it!

Hey Guys and Gals   Thought I'd get this show on the road with a discussion containing some links to websites of interest. My list is very short, but the idea is that everyone contribute and add links to interesting sites as they find them.   PTC Learning exchange; Contains multi media tutorials. http://learningexchange.ptc.com/   PTC Blogs http://blogs.ptc.com/   An Ageless classic, Olaf Corten's ProESite http://www.proesite.com/   Creo Schematic / RSDesigner; for everything related to schematics, Zak is probably one of the gurus out there. http://rsdesigner.com/form/contact.htm   PTC Creo site http://creo.ptc.com/   Please add more...!