Other Creo Products (Sketch/Layout/Schematics and Creo Direct)

Is Creo Sketch still a PTC product?Is anyone using this tool in thier organization? I ran across a data sheet on it and it looks to have a bunch of the markup sketching functionality that we are interested in for MacOS and iPad based reviewers in our organization. https://www.ptc.com/-/media/Files/PDFs/CAD/creo-datsheet/sketch.pdf   

I would like to propose to implement on the PTC website whrer new ideas can be submittet a kind of search tool where I can filter and search the existing product ideas. Someone could have already submitted the idea I would like to submit. So I would rather vote for the existing idea than submitting a new one. BUT with the existing tools it's nearly impossible for me to find any existing idea which is similar to the one I have.   - Specific search for product enhancement ideas - well categorized - filtering for category, product range, date of submission, person who submitted the idea, number of votes a.s.o

As per this thread - same issue   Thanks very much and sorry for the late reply.   Is there any way to also hide the labels about version, filename etc.?  

Hello,   The coordinate of creo layout (.cem) is X,Y which correspond to the front view of an assembly (.asm). additionaly to a layout in the front view, I have to create a layout with a X,Z coordinate to correspond to the top view of the assembly.   Is it possible to modify / redifine the coordinate of a layout ?   Thanks

I am currently running Creo Schematics 4.0 and it's taking me a minimum of 45 minutes to export sheets from my designs that need to be used in other designs.  Is there anything that I can do to reduce the time it takes to export (i.e. clear cache, simplify library, etc.)?  We use a central catalog that I do not control but understand the structure well enough that I could attempt to make a simpler structured copy of it for my own testing.  Is that something that would likely help or is there something better that I should try.  We do use multicore processors in our computers, but it does not appear that our copy of Creo Schematics takes real advantage of that fact if it's even capable of doing so.  I'm just getting real tired of not being able to get my work done because of slow exporting speed.

The dimension values are changing in the representations of Solidworks drawing after publishing by Solidworks worker.What could be the problem ?. can anyone help me on it ?

Creo schematics shut down on me.  And now when I try to open the file I was working on, Creo schematics reports that 'Directory in use by an open design'.  How can I open my old design.

I am using Creo Schematics Release 3.0 and DatecodeF000   How can I change the global parameters? All the commands in the "Edit Global parameters" menu are greyed out.I am working with a catalog that was provided to me directly. Where and how are the derived functions stored? Are they linked to this catalogue?I have a derived function that adds a dash between the 3rd and 4th character of a string. This function is visible in the globals parameters but does not seem to work because the parameter always remains at "UNSET" when I work in the schema. What could be the reason for this?   Translated with  www.deepl.com  Translated by Corina Ionescu, on June 27th 2022 Comment peut-on modifier les paramètres globaux ? Toutes les commandes dans le menu "Edit Global parameters" sont grisés.Je travaille avec un catalog qui m'a été fourni directement. Ou et comment sont stockés les fonctions dérivées ? Sont-elles liées à ce catalogue ?J'ai une fonction dérivée qui rajoute un ti

I am using Creo Schematics Release N/A and DatecodeN/AWhen I create a new project it asks me to usetemplate design “C:\Program Files (x86)\PTC\Creo3.0\M010\Schematics\creoschematics\demodb.rsd”, if I don’t select this then Idon’t see any components in “Catalog Explorer”, Is there a way to manually setthe path to symbol library??

Hi everyone,I have a problem with this request:How Creo Schematics can Translate an attribute or simple notes into a scheme? At the moment the best way found is with the Layer method: I've create FR-Layer/Eng_Layer and so on... but there are some problems (positions, export) Thanks!

I am using Creo Schematics 4.0 M010Hello,Trying to create a report of BOM along with tag number (topologic number) in order to integrate to Windchill.Process design, not electrical.Problem is that a part (as for Windchill) can have multiple tags (so quantity should be 1 and not as many as tags).Ideal will be an xml file that I can import into Windchill) or directly create the Windchill BOM when checking in the rsd conception.Printscreen enclosed

Hello, to continue my project I want to use Creo PRODUKT INSIGHT. Before starting the project I wanted to know how this works. I created a simple CSV file. I also created a part as a sensor and defined the sensor parameters in a xml file.  (CSV, XML files and Errors are in the PDF)   When I load the CSV file in the assembly, I get the following error message.  invalid input It is necessary to complete one of the measured parameters   I don't know what I missed. Which parameters do I have to complete? Do you have any idea to fix this error?   Thanks a lot  

I am using Creo Direct 7.0 7.0.0.0Looking for any script or utility that will allow us to run on Folder level to extract CREO part or assembly properties information such as Part Name/ID, Description, Mass, inertia, Volume, Material name, and other manufacturing information like Torque if available.We received set of Creo parts and assemblies from our customer that we would like to extract the properties information and prepare a Bill of material We only have Creo Design Advanced Plus and CREO Engineer II & III and no Windchill

I am using Creo Direct 4.0 M1300in Assembly drawing view few of the component edge lines arent coming properly. view shows broken lines of sub-components.I tried to bring those lines visible by changing the view display style in the drawing but no luck with any of the options. I couldn't able to find any other solution to this issue. Kind request to take this on priority and provide the solution.

I am using Creo Direct 2.0 M030Hello, the three-dimensional ××××.prt of simple model, the three-dimensional ××××-DE.prt of complex model and the two-dimensional ××××.drw of complex model can be uploaded and linked to the part under ×××× , Whether changes, integration and other functions have any impact   Translated with Google Translate Translated by Iuliana Nuta on 12.Nov

I am using Creo Schematics 3.0 M020使用flexnetlicenseserver11.16.2.1在server 2019上部署许可，但是在客户端获取不到许可Here are the errors that I faced 严重 Unable to obtain license for Creo Schematics

I am using Creo Direct 4.0 M100Cannot seem to install software and point it to a flex license server. Here are the errors that I faced Wrong MAC address is displayed when installing software. Cannot find where you can point the software during installation to the flex license server.

I am using Creo Schematics 3.0 M020We have the below Creo Schematics / WGm / Windchill.We find issues when we try to use WGM/Creo schematics on our company VPN, when we connect Creo Schematics/WGM to windchill using LAN/Ethernet it works fine, when we connect via VPN, it fails to open the dataset (.RSD) file, it says file is outdated. After that even if we try to reconnect using LAN, it does not work, only way is to re-install the Schematics software. Is this a known issue??WGM: M030-CPS17 Release 11Schematics: Version 3.0, Datacode: M020, Config ID: 1A1614522Release: 11.0 M030-CPS18 Products InstalledCreo View - ClientsCreo View - AdaptersPTC Windchill PDMLink 11.0PTC Windchill 11.0 Information Modelerwindchill 11.0 Serviceswindchill 11.0 mpmlinkwindchill 1.7 REST Serviceswindchill 11.0 help centerwindchill 11.0 service packwindchill 11.0 platform structureswindchill 11.0 info*enginewindchill 11.0 common baseVRD LSA Foundation Template - Extended1.4 Installed Locales: There is no non-

I am using Creo Direct N/A N/AUsers not able to use CREO Here are the errors that I faced I restared the service and ran PTCSTATUS.bat to see if that fixed the issue but Users still not able to login.'

I am using Creo Direct N/A N/AHi Support TeamWe bought the Creo and try to install. First I already input the HOST ID and get license file. and try to Add my staff PC it shoe "Not Suitable"May I know what should I do ? Here are the errors that I faced "Not Suitable"

I am using Creo Schematics 3.0 M020While Launching eSimulate Lite button on Creo Schematics , it fails to launchHere are the errors that I faced Method call failed: V RSDSimStarter.goProbe the components or geometry you want to select

Hello,Creo crasher after 5-10 minutes with a fatal error message (tracebak.log)Can you help me please-------------------------------------------------The trace creation timestamp is: mer. mai 26 10:04:59 21The executable build timestamp is: mer. sept. 26 10:48:51 18The datecode is: 2018260The pro machine type is: x86e_win64The process ID is: 2020The traceback type is : CRASHThe logger exit status is: 00003The Trail is: trail.txt.49The release is: 5.0The product version is: 5.0.2.0The product title is: Creo Parametric-------------------------------------------------Exception EXCEPTION_ACCESS_VIOLATION has occurred in the thread 23336.

I am using Creo Schematics 4.0 M010Software gives an error when trying to open the attached drawing: A design does not exist at specified locationHere are the errors that I faced A design does not exist at specified location

I made a template including several sheets in creo schematics and then I create a new design using the same template. But, each sheet`s ID are the same. I need to make deferent sheet`s ID for a new design      

We think to upgrade CREO version from 5.0.4.0 to 7.0.0.0. Please confirm CREO version 7.0 is compatible with our existing windchill 11.0