Other Creo Products (View/Sketch/Illustrate/Layout/ Schematics and Creo Direct)

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0We recently upgraded from 4.0 to 7.0. In 4.0 when we exported a design as a pdf if we were to open the pdf in Adobe Acrobat Pro and edit text the text was editable as an entire entity such as a sentance/paragraph.In 7.0 if we edit the text the same way all text now are separate entities and each individual letter/word has to be changed separately.

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0One of our customer ILENSYS TECHNOLOGIES PVT.LTD (#606613) is having Creo Schematics recently purchased ,they are having Creo Software Version 9-0-2-0, when i am going to rev up the version 7.0 to latest version ,it showing the popup error like (error if you want perform this action, please Log a Case),

In Creo Illustrate 9.1, is there a way to save the sBOM coordinate and rotation states that I have at the end of a sequence step? It can be something I have to set-up before I create the step. I'm just hoping for this functionality, so that I have some kind of workaround for an issue I'm having - I've already submitted a ticket for the issue.

Hello all, I'm still having trouble arranging my exported images in a reasonable way. Example:I want to exoprt an image that should be 10cm wide (at 300dpi = 118 pixels/cm). 1.) Previous procedure:- Adjust the window approximately to the target size of the image (attachment “Bild-01.jpg”).- Export the image with the desired width (10cm) and resolution (118 pixels/cm). Problems:- The export size usually matches the target size in only one direction. Most of the time, the exported image must be cropped at least in the second direction.- The fit of the image in the window is lost if the shape of the window is changed. Correspondingly, the image will no longer have the originally desired size (attachment “Bild-02.jpg”). So window and representation must ALWAYS be adjusted manually.- The position numbers and labels vary in size depending on how large the exported image is (e.g. wide 10cm or 15cm). 2.) Alternative procedure (attachment “Bild-03.jpg”😞- Defining a "pa

Hello,unfortunately I have a next problem: I just noticed that when I export images, the stroke widths are different when I make a display with and without page setup. So far I have always exported images by fixing the model in the window and then setting the desired image width (e.g. 17.5 cm) with resolution 300dpi (118 dots per cm) when exporting. The result is an image with a pixel width 17.5cm x 118dpcm = 2065 pixels. In the meantime I found out that it is more convenient to define a page size. And that you can define your own page sizes with the administration tool. So I defined a page with the dimensions 17,5x11cm and set it later. When exporting the image I only had to set the resolution 118dpcm and I also got an image of the pixel width 17,5cm x 118dpcm = 2065 pixels. So both images are the same size in the result. For both images the pen thicknesses Thick = 0,2mm and Thin = 0,1mm were set. Problem:The exported line thicknesses are different. The e

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0How to create 2D parts？how schematics develop the two dimensional element-----------------------------------Translated some text from simplified chinese to english using google translate on 02-Feb-2023 at 11:26am IST. Translated by vnamboodheri-----------------------------------From: 如何创建二维部件 to How to create 2D parts?

I'm having a problem where every time I save a .c3di file and need to open it again, the figures are no longer in the same state I left them in. When I go into the sequence steps, parts of the model have moved around to different incorrect positions. What is causing this and how can I fix it? I have had to start over twice now, thinking that it was something that I did.

Hi, Is there any option or workaround to export all figures into single PDF file? For example, i have combination of Figures, Some 3D Figures and many 2D Figures.All i want is to combine all figures in single PDF file. In publishing option it combines all pages in single file, but in .pvz file and can be viewed through Creo View only. My concern is same i want it in PDF file extension. Please help me out if any workaround is there. Regards,Jignesh.

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0(.dge) I get the following error message when I try to open the data'Internal Error (005) occurred. Use the Check Database tool and contact technical support for assistance.'Here are the errors that I faced'Internal Error (005) occurred. Use the Check Database tool and contact technical support for assistance.'

Can I make a duplicate of a part and have it in the sbom?  Example assembly didn't contain allscrews so I need to add one..   

Hello,I have two question about creating views in Creo Illustrate.1.) Is it possible to create a kind of interrupted or collapsed view (or what I shou call it) to push large parts together (example: View1 and View2)?2.) Is it possible to display only a part of a view, so that it is still possible to place position numbers (callouts) on the left and right (example: View3 and View4)? Thanks and greetingsRamon Bean  

I have this callout that appears out in space. I need to relocate it but dragging the leader does nothing. I've deleted the callout and added it again but it always ends up way out. How do I fix this?  

    Thanks,    

Hi,  We work with Inventor for 3D modelling and when these models are viewed in CreoView Lite, it opens upside down by default. Which setting do I need to change in CreoView to open models with the Z-axis pointing upwards?  

When publishing in Illustrate, the list of items was printed in pdf using the xml template.I want to know how to modify the design of the item list table shown below. I would appreciate it if you could tell me how to correct the background color and align the letters in the middle.       

How to create user specific custom commands in Creo View 9.0. Its showing as creation of xml files, doing so,can anyone elaborate this process? thank you so much

I am using Creo Schematics Release 9.0 and Datecode 0.0.0How is Schematics 9.0 integrated into Windchill. The WWGM 12.1.1.1 does not offer Schematics 9.0 as an application.

I created 16 decals, all using the same method. One of the decals will not appear on the model. I get a blank placeholder as though it is there, but no image on it. All the others worked fine. 

Hi all, I am using the Adobe Plug in for PDF markups in Creo View and am curious if there are ways to set the scale on PDF measurements? Currently I'm able to measure the document with the Adobe Tools, but am unable to change the scale from the embedded scale. This is fine if the scale is embedded properly but that is not always the case for the documents I work with. Has anyone had any experience with measuring PDF in Creo View? Currently using Creo View 9.0 and Adobe Pro. Thanks 

I saw some older posts, but nothing recent. Is there a way to convert .c3di or .pvz files to a more neutral format such as the FBX filetype?  Has PTC recognized this gap and is it on their roadmap? 

I want to use the pvz file in Unity. Please let me know if there is any other way. Thank you.  

How do I add a bill of material table to a figure in creo Illustrate

I am using Creo Schematics Release 4.0 and DatecodeM010Hello Support, I have a large design in creo schematics 4, i tried to open it, but now i am getting the following:-Internal Error (005) occurred. Use the Check Database tool and contact Technical support for assistance.Here are the errors that I facedInternal Error (005) occurred. Use the Check Database tool and contact Technical support for assistance.

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0   Application scenario: In the process of drawing the schematic diagram, it is found that there is no required Cable in the existing Cable library. At this time, the maintainer of the Cable library needs to create the required Cable and update the template file. Draw the schematic diagram above; in this case, the schematic diagram that has been drawn before will be wasted and can only be redrawn;Requirement: Because the Cable library needs to be managed in a unified manner, it is necessary for the management personnel of the Cable library to import the newly added Cable library file into the computer of the schematic drawing personnel to use it directly, instead of reinstalling it in a new one. Draw on the basis of the template file;   Translated by Andra Chirila using Google Translate on February 10, 2023-----------------------------------------------------------------------------------------------应用场景：在绘制原理图过程中，发现现有

Would it be possible to support for viewing PDF files that have 3D models embedded in them ? Thank you.