PTC Education

installed creo parametric 3.0 and when I open it, it says "license request failed for feature" and then closes after I hit OK (which is the only option I have). This keeps me from being able to use it

I am opening a new discussion in order to expose you some problem that I have with the Thingworx platform. As a matter of fact, it is impossible for me to delete the two following valuestreams: PositionTemperatureValuesStream & PositionValuesStream. Thingworx Composer stops to work. When I squeal these two things, the “related Mashups” an “Networks” categories expose an error. Please find the message displayed below:When I try to delete these valuestreams, my browser (as it happens google chrome because it is the browser recommended by PTC) just crashed.Please tell me what is the origin of this problem? Is it because I have recorded too many data in the same valuestream? I have also try with the true administrator account and this trouble remains.

So i went throught the academic program to get Creo for my course. I thought everything went well but apparently it didnt download and install. Im now trying to find where i can re-download it from but struggling to find where i can. Any help would be much appreciative.

Is it possible to install creo on multiple computers using the same username?

I had Student License of CREO 1.0 but now its duration is over. Now I am trying to another product of PTC but there a notification comes which says 'License is invalid' and also states that there is a Server is running on my HostID but for another feature. How Could I stop that server on my HostID?

How to remove my HostID from PTC CREO 1.0 License Server?

Does anyone know if the New Creo 3.0 will run on windows 10 ?

Welcome to the 2015 - 2016 FTC FIRST Res-Q! After watching the Game Animation, please be sure to read the FTC Game Manual Part II for a detailed description of the Game rules. The FIRST Tech Challenge Game Page | USFIRST.org  

Check out this great article from 3HTI about Windchill Workspaces.http://3hti.com/blog/what-is-a-windchill-workspace-2

  Here are links to the PTC Community documents for the entire Robotalk 2014 Season.  Each contains links to the video, any referenced links from the presentations, and the presentations themselves.    ROBOTalk – Session 1 - Introduction to Product Development and PTC Creo - http://communities.ptc.com/docs/DOC-6351   ROBOTalk – Session 2 - Team Organization, Intro to PTC WindChill and Volume Allocation in PTC Creo - http://communities.ptc.com/docs/DOC-6373   ROBOTalk - Session 3 - Brainstorming and 2D/3D Conceptual Models - http://communities.ptc.com/docs/DOC-6384   ROBOTalk - Session 4 - Fundraising and Subassemblies in PTC Creo - http://communities.ptc.com/docs/DOC-6390   ROBOTalk - Session 5 – Team Spirit, Subassemblies and the new Andy Mark FRC Chassis Model - http://communities.ptc.com/docs/DOC-6425   ROBOTalk - Session 6 – Team Scouting and Creating a Custom Part in PTC Creo - http://communities.ptc.com/docs/DOC-6432   ROBOTalk -

ROBOTalk – October 21, 2015   In our fifth webinar of the 2015 season, we learned about detailed design from Jordan Cox, explored what it takes to design a buildable robot with FRC Team 1816, the Green Machine, and learned about different ways to use stock material in PTC Creo CAD models with Scott Morris.   Recorded Video Link – Streaming: Video Link : 7206 Download: https://ptc.webex.com/ptc/ldr.php?RCID=55374052a84cf6f06a457ffa1dcb506c   Note: The WebEx ARF player is required to playback the recording if you download it. Download ARF player   Here are the links to referenced webpages from the webinar:   PTC FIRST Main Webpage ptc.com/go/first   PTC FIRST Community Site http://communities.ptc.com/community/academic-program/first   Tetrix Kit of Parts http://apps.ptc.com/schools/FIRST/FTC_TETRIX_KOP-2015.zip   Training Curriculum - How to Model Almost Anything  - http://apps.ptc.com/schools/How_to_model_almost_anything.zip   FRC

Is there any program or plugin supports for dynamic drawings in Mathcad? I need some basic drawing tools

Hi, I install creo parametric 2.0 in a mac pc, but in a windows system. Everything is ok but when i try to move an imported part I can't move it. can you help me please?@

Hi Everyone,I was wondering if anyone can help me with this. I keep getting a script error when opening ptc creo student edition. I have no idea how to fix this.Thank you

I created a GearAssembly.  It consists of a hub and an 80 tooth gear.  Made a motor assembly and put the gear assembly on the shaft of the motor.  I need to move the gears down the shaft toward the motor.  I am wondering how I do this?  When I put my motor in the assembly with the wheels and C-Channel part, the gear on the motor is in the wheels.  I need to slide it down the motor shaft to match with the gears on the wheels.Thanks for any help.

This is the rendered image,,the latter one was just the shaded one from the analysis.

Here is the bare bone of the 1937 Kelvin K4 diesel engine from a Scottish trawler, doing the camshaft now which is interesting.  Modelled in CREO 3.0 the rendered clip of 720 frames took 5 hrs to complete.   I am using a Dell T5400 workstation.

I try to download Creo 3.0 and I can make it to the download stage for the software but when I try to get the licence downloaded I just get an error message.

Hi,I would like to know how I generate a single license key for Creo 3.0 (ie a .dat file). I know how to do this for v2.0  (- www.ptc.com/go/singlelicense4creo2) but don't know the url for V3.0Thanks,Gary HoranHornbsy Girls High School

I am trying to install license server for my school and after the installation that I follow the instruction on my e-mail, I found that the client computer cannot access license server. no matter the Admin page or install license. But locally on the server, the flexnet publisher can be open. And I do not know the admin password of that page. I tried use windows account but it was not work.,

  The Windchill Practical Guide is also located in the banner of Windchill for quick access anytime you are using the system.   Looking for more help getting started with Windchill and Creo Parametric? Check out the Windchill Help Center topic named "Getting to Work with Creo" for all the details.

Im planning to put my hands on Pro-program and looking for some tutorials on the same.Could any one please share the tutorials on the Pro program if you have it.Also is there any pre-requisites for getting started with it.Thanks in advance.

As the title states, I cannot run Creo Parametric 3 because I get an error that states:  "The program can't start because ucore46.dll is missing.  Try reinstalling the program to fix the problem."  Of course, reinstalling did NOT fix the problem.  Can anyone point me in the right direction here?  I've done a good deal of googling on the matter,and haven't come up with any solutions that will workI'm running a windows 10 machine, attempting to run a Creo 3 Parametric student license.  Any support appreciated, thanks

Dear all, I am in a process of installing Creo 3.0 (academic programme). Unfortunately, the license product code (BK400407EDSTUDENTUNICL) does not work. What may be the problem? Your hand of assistance will be highly commended.RegardsNathi

ROBOTalk – October 14, 2015   In our fourth webinar of the 2015 season, we learned how to assemble parts in PTC Creo with Chris Carr, explored many options on drive trains with Olivia from FTC Team 3486, Techno Warriors Advanced, and Kyle from FTC 6389, the Lazybotts showed us how they are tackling the challenges of the Res-Q competition.   Recorded Video Link – Streaming:  Video Link : 7205 Download:  https://ptc.webex.com/ptc/ldr.php?RCID=220f13c65e84feca6fddbe7415293bd5 Note: The WebEx ARF player is required to playback the recording if you download it. Download ARF player Here are the links to referenced webpages from the webinar:   PTC FIRST Main Webpage ptc.com/go/first   PTC FIRST Community Site http://communities.ptc.com/community/academic-program/first   Tetrix Kit of Parts http://apps.ptc.com/schools/FIRST/FTC_TETRIX_KOP-2015.zip   FTC 3486 Contact Information Complete Presentation available as an attachment and also at: bit.ly/