PTC Education

More useful than the chocolate version, the Cadogan teapot has no apparent way of filling it. A PDF in the zip file explains more. 

These have intrigued for many years and 3D printers make it possible to make them.  A PDF in the zip explains more... 

Install Guides:PTC Creo 2.0PTC Mathcad Prime 2.0PTC Creo View 2.0Common Problems:Fatal Error Encountered. A Traceback Has Been WrittenLicense Reqeust Failed for FeatureSimple License Entry Greyed Out / License Failed!Creo Parametric is shutting down because it could not run the Quality AgentMathcad PDSi viewable support errorFAQ:What are the hardware requirements for Creo?Can I run Mathcad or Creo on my Mac OS?Why should I use an Academic Configuration for PTC Creo 2.0?Can I install my software on a new machine if my old one has stopped working?

Hello,We are a rookie team and are watching the Robotalk series and have learned much. We are wondering if anyone knows where we can find tread parts to use in Creo. We found one tutorial and it seems to be very thorough but we can’t find the parts for the treads to try out the tutorial instructions. We were also wondering where we can find other tutorials working with treads. Thank you.

Thank you for registering for a PTC Windchill project! This project will allow you to communicate and collaborate with your team members and mentors, while managing your team data more efficiently. Here is the FIRST Robotics Quick Start Guide that explains how to access your project, add team members, etc. Your project has been created and an invitation will be sent shortly via email to join your project. In the meantime, here is a link to your project for your reference: Click HereGetting started: In the event you did not receive the invite to your Windchill project because your system may have blocked it, go to: https://firstrobotics.ptc.com Enter your username and password to access the site. Your username is your email address. Click the Navigator bar, the Project icon , select your team project name from the list and choose the functional area you’d like to open (Folders). We strongly encourage you to review the following links:http://www.ptc.com/go/firstwww.ptc.com/go/firstkop

Creo Modeling Challenge!   At the conclusion of this week's Robotalk session, we had a couple of questions around the best way to create an 8020 profile. With so many choices available, we decided to put the challenge back on the community. What do you think the best way to model an 8020 profile is? One feature? Ten features? Who knows?   Take your best shot at making any 8020 profile and let us know how you did it.   Just add one or more pictures to the Creo Modeling Challenge: 8020 Profile Image album in the FIRST Community. Looking forward to see what you come up with   We'll take 5 minutes at the start of next week's Robotalk session to review some of the entries.

Here is the Creo model I created for the 8020 challenge.

This is my Creo file for the 8020 Design Challenge

Hey every time i open parametric it displays the waring : "Liscense request faailed for feature"Windows 864bitLenovo

While attempting to install a student version of Creo/ProEngineer Wildfire 5.0 from online I encountered a problem with the license configuration. I have an valid user account and internet access. I entered my PTC username and password on the License Configuration page of the setup.exe. The instructions then indicate for me to select the "Generate License Files" radio button, however, the username/password fields as well as the selection button is grayed out and doesn't allow me to proceed.Any help would be greatly appreciated.William Duncan

Hello,I have been using Creo Parametric 2.0 Student Edition for a while and it has worked fine until now. Yesterday, after checking a piece I rendered a couple of weeks ago something really weird happened. Whilst the sketch looks perfectly fine once the piece is rendered the view is completely messed up.The sketch is the following. The sketch is revolved along an axis in the middle of the right and front plane:This shape worked fine every time since I first modelled it. However since yesterday it fails to generate a proper shape and it appears like this instead of how it should appear.The rest of the shapes I've modelled work perfectly fine and this error only happens with this particular piece. When I edit definition everything appears normal but then the error happens once again. I have tried regenerating but it just doesn't work. Do I have to remodel the piece or is this error fixable?Thanks in advance for your help

Advanced PTC CreoJoin the cast of Robotalk for an advanced session on Creo covering modeling techniques, mechanism design, troubleshooting and some cool tips-n-tricks.   Click Here to view the downloadable version of this video.   (view in My Videos)

I've installed Creo 2.0 academic version and it will not run.If I remove the quality agaent then it closes reporting error code 09 and if I install the quality agent it fails to run at all and windows closes the program.Any help on this would be much appreciated.Thanks,Jake.

Hello, I've been registered correctly, but now I don't know where go to download the program?Thank you.

I can't uninstall CREO2. Why I need it - because my WF5 won't run after CREO2 F000, but F001 not help - old build is still here plus additionaly I got F001. Each time I push UNinstall button in "Uninstall a programm" menu - I get not helping window with just ERROR word in it.

Have been trying to get to the home page for RWDC over the last few days keep getting the following error messageUnknown Host Description: Unable to locate the server named "www.realworlddesignchallenge.org" --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.

Hi, our team has begun development on our robot within creo. I want to demonstrate an arm and how far it can move but the parts intersect when I use the drag components button. For the FTC field the balance arms some how don't intersect with the floor mats when using drag components. I would like to know how this functionality was achieved so we can implement it into our design. Any ideas?

Hello everyone! This is my first year in FRC and I've been chosen to lead my school's CAD team. I have very little 3D modeling experience and have never worked on something like this. So far I've learned very basic functions of Creo 2.0 such as Revolve, Patterns and Swept Blend. All my studying has been done through the internet.What I've been wondering is if anyone would be willing to share some tips, guides or parts to practice on. Currently I have a few people working with me who I need to hand out tasks to, but I'm finding it difficult to find them part pictures that they could work on. Help would be appreciated.

Hi, I´ve installed Creo 2.0 student edition on a hp workstation (8gb ram, nvidia quadro fx 1700) but the program isn´t running. Is there an issue with the graphics board? Thank´s for your help! SP

This year First has allowed a number of different "new" parts. I've been slowly working on designing some of them for our schools 6 teams to work with, but the corkscrew inside the WormDriveGearbox is baffleing me. Has anyone designed this yet? Are there any tutorials on this? Any recommendations? Thanks for your help.This worm wheel should be pretty simple to make by creating the teeth and patterning them around a cylindar .The worm gear (corkscrew) is what I'm unsure of. It has two spiraling sets that run parallel to each other. If anyone has the time and wants to do a screenshare with me, I'd appreciate your time.Thanks

The Graphics Toolbar is missing from my workspace in Creo Parametric 2.0. Could someone please let me know how to make it visible again? Thanks so much.Jean-Ann

In response to a question from teacher Desmond O'Neil I put together this helicopter model to show belts and gears in action.A belt connection links the motor and the main rotor pulleys with a reduction in rotational speed.The main and tail rotors in a helicopter are at right angles and in real life can be linked using a twisted belt but Creo Parametric doesn't allow this. However, a PTC Creo gear connection will work and links them in the model with a gear ratio that makes the tail rotor spin faster.The model also demonstrates the Freestyle tools applied to the fuselage. Video Link : 4434

Hello All,I'm new to this forum, so by way of background - I am a 2nd year FRC engineering mentor, and a long-time (20+ years) Pro/E user. The team that I am mentoring had never used CAD before (the school does not offer any classes that use CAD). Last year I downloaded the free license of Creo that PTC gives to FIRST teams onto the team's lab computer, and the kids showed some real interest.This year, I'd like to get the kids more involved in using CAD, but a question has come up. The other mentors believe (and I agree) that it would be helpful for the kids that are intersted in CAD to have a copy of the software on their laptops so that we don't all have to share the one computer. There has been some talk of switching to another CAD software that hands out multiple licenses. Of course, we don;t have anyone that knows the other software. Can I just have several of the kids download the student version of Creo? Is use of the software for FRC an acceptable use of the student license? Ar

Two optional exercises were mentioned in "Phase 2 Detailed Design" (page 15) of the How to Develop a Product Workshop. The text said that these exercise are found in the Phase 2 Folder but I could not find them. They both sound interesting, are they available anywhere else?

Hey everybody, My team's trying to train for the Real World Design Challenge by following the How To Model Almost Anything manual on the site's Getting Started page. However, we have Creo Elements/Pro 5.0 and we need to update to Creo Parametric 2.0 in order to make it work. As a team that has participated in RWDC in the past, do we get free updates for Creo?IS Creo Parametric 2.0 the latest version?