PTC Education

My computer runs windows 7 64 bit and meets all of the specifications for Creo. I have my product code, but everytime I run the setup wizard to generate the license it returns this:A failure occured during license generation.An unknown error occured requesting a license file be generated from ptc.comI am using this software in an engineering elective at Univerisity of Alabama Birmingham.

Yes though the Creo software is intended for use on single a machine only, if your machine needs to be replaced it is possible to install and license the software on a new machine.Please submit a Support Request and include:The exact edition of the software you’re usingThe order number if you purchased the softwareThe product code that you used to install the software the first timeThe PTC HostID of your machines (this is your physical MAC address of the machine)A new license file will be sent to you with instructions for installation.

How long should it take to receive my teams Windchill invite?

I'm working through the part modeling exercise in Section 2 of "How to Model Almost Anything", and I can't figure out how to assign the material (brass in the example). Tried Applications->Simulate which launched Simulate Lite. I think I managed to assign brass to the part, but whenever I try Analysis->Mass Properties I'm getting the default density of 1 Kg / mm^3.

Hi PTC,We are working with the MATRIX hardware and we want to use the CREO to model our robot, Matrix Robotics International System is include it in the CREO to model?Best regards.Marco.

What is the best way to add a DC motor to it's bracket? Which constraint should I use? I want to be able to rotate the motor and adjust it at a later time, but am unsure which is the best method. Thanks for any tips.

Is there a way to get more color choices in the student and academic versions of Creo? Many of the team robot models appear to have many more colors for their parts that we can't seem to find.

Creating Assembly Models in PTC Creo Assembly models are the way we model products. All the parts that make up a product are assembled into the model so that we can determine the overall height, weight, volume, center of gravity and other properties of the final product. To understand assembly models, it is important to understand assembly constraints and how to use them to assemble parts.   Click Here to view the downloadable version of this video.     (view in My Videos)

Trying to install Creo here. When using the wizard it's asking for the location to be installed in. It seems that ANY change on that page (other than unchecking the Quality Agent box) results in disabling of the Install button. For example I don't have room on my C: so am trying to change drives. As soon as I click on the box, the Install button greys out.

I am being told that my license has expired, but I cannot find any way to renew it, get and enter a new code, or anything. Just a completely non-interactive box with the only clickable thing being an "OK" button. All windows automaticaly close themselves. How am I supposed to recover functionality?

Why not challenge your pupils to design a sustainable future with the chance to win a 'Cube' 2nd generation 3D printer.Challenge briefs, lesson plans, stimulus sheets plus hints and tips are on the web site.  www.aludtchallenge.co.ukThe deadline for entries is 17th January 2014.

Great Plains uses PTC Creo to design farm machinery to maximise yield and minimise environmental impact.Click the image below to see the video.AGCO has a long history of product development and now use the latest PTC Creo and Windchill software to deliver custom tractors to customers around the world.  Click the image below to see the video.Other companies using PTC Software showcased on the the Product Design Show.  Click the image below to see the video.

When I try to install the Creo Elements/Pro 5.0 Student Edition from the disk it gives me an error message that states: This mode requires an internet connection to access PTC.com.

This is our first year teaching CAD (ptc/creo) in the high school. After 3 weeks, in a class of about 22-25, most of the students are starting to get the hang of the drawing tool. My question to all who are reading, what is your opinion on a good, efficient method of Grading the students? Are there any testing materials (mult choice, drawing exhibits) available through the PTC Academic Program? To be honest, I'd like to just give a pass/fail and concentrate on giving the students the time in class to develop their hands-on skill. But unfortunately, we still live in a grade based environment. Any ideas or test/quiz examples greatly appreciated.Thanks.

Hi,I am an absolute begineer, using Mathcad to do a uni assignment.I have a file I have been working on for a few days that I cannot even open as it causes Mathcad to crash, I really need to retreive it or ill have to start again and the assignment is due soon Any ideas as to how to go about it?Cheers

Here's what should be a simple question. When I use the round feature and it gives me a dimension of 10 , what does that mean? Is the ten based on a radius from some center point, or is it a length, or a number of degrees on a circle. There is nothing that tells me. I guess for seasoned engineers this is a no brainer, but for a computer programmer who is now teaching CAD....??Also the same question on creating ARCS. Is there a way to figure out the measurement system at play.Thanks for your patience.

I was wondering the differences because as I'm watching the video presentations on How to Model Almost Anything, it's hard to follow on the screen what they are doing and wondering if they could use the Student Ed for the webinars (if that's what the majority online are using).For instance, I can't get my objects pallete to stay up when I'm sketching.Thanks!

Hey, Im a teacher at a highschool that has installed Creo 2.0 on computers with 2 gigs of RAM and a 32 bit Intel celeron, and pentium (pentium is a 4 cpu at 3.06GHz, and the celero is a 1 cpu at 2.8GHz)What are the reccomended computer requirements to run creo smoothly? Thanks.

While PTC Academic software should run on most Windows 32bit and 64bit systems please refer to the Creo Academic Hardware Requirements pageand the following commercial support pages for more information on hardware requirements.

The anwser is Yes and No. Currently PTC Academic software is supported only on Windows machines. However some users have found success running Creo on Mac systems in the following 2 scenarios.Using virtual machine software such as Parallels to run WindowsRunning Windows software in dual-boot mode on Mac systems with Intel-based hardwarePTC cannot make any recommendations on hardware or software for users attempting to run Creo in these environments.

What kind of license does my software require?All PTC Academic software uses FlexNet licensing and requires either a locked license file or access to a license server. The license whether configured as locked file for a single machine or as a floating file for a license server must be contain the correct license features at the correct version for the software to run.Most versions of PTC Academic software can use both locked license files or a license server but certain Academic applications are sold with locked licenses only.What is the PTC HostID referenced in my license and some software documentation?The PTC HostID is the term used for the unique identifier to which all licenses for PTC software are configured. This may be interchangeably referred to as hostID, Physical Address, MAC Address or Machine ID and corresponds to the Physical Address of a network card on the machine to be licensed.Both single locked license files and floating license files for a license server are configu

Register for a Product CodeBefore you can download and install Mathcad, you must first register or purchase a product code. We donate Mathcad free of charge to all K-12 educators and Students. If you are not an educator or student you can purchase Mathcad from the PTC E-Store.Register for a Product Code (K-12 Students and Teachers ONLY)Purchase from the E-StoreQuick Installation GuideFor those looking for a quick guide to get Mathcad going as soon as possible and are confident in their technical ability, please follow the link below.PTC Mathcad Prime 2.0 Quick Start GuideInstall VideosFor those looking for an in-depth video guide, use the series of links below.OverviewInstalling Microsoft .NET FrameworkDownloadingInstallingLicensing / Verifying CompletionIf you have problems during the installation please do no hesitate to get in contact with us here on the community page or submit a support request.

Robotalk is a weekly webinar offered by PTC from September through November to all FIRST teams.PTC experts will lead attendees through our new curriculum titled How to Model Almost Anything followed by How to Develop a Product.The first series of webcasts in September will be an in-depth introduction to PTC Creo 2.0 covering the core capabilities of solid modeling. The second series of webcasts in October will focus on the Product Development Process explaining the lifecycle of a product from concept to retirement. The final series of webcasts in November will cover PTC Creo at the advanced level, PTC Mathcad, and PTC Windchill. Robotalk runs every Wednesday from: September 4 - November 20 @ 7:00 pm - 8:00 pm EST Robotalk Schedule September:4   Webinar Phase 1: Getting Started Modeling with PTC Creo - REPLAY11   Webinar Phase II: Building Part Models18   Webinar Phase III: Creating Assembly Models25   Webinar Phase IV: Simulating the Real WorldOc

Building Part Models in PTC Creo In this webinar, we will take you through the process of creating a part from nothing. We will cover the process of creating a model plan and then implementing it to create your very own unique 3D badge.   Click Here to view the downloadable version of this video.     (view in My Videos)

I downloaded the 4.2 GB creo 2.0 student edition file from the website. I installed as per the instructions. Things worked properly. But I coz of some problem in my laptop, I had to format it. But after reinstalling and opening the software got an error, whose screenshot has been attatchedHow to solve this error? Thanks in advanceSyed Muazzam