PTC Education

I've just purchased and downloaded creo 5.0 student edition.The downloaded file for win/64 was only 191MB. After unzipping and running install nothing happens!!! -no error codes, no student edition screen.anyone have an idea (I'm running win7 64)thanks

I have installed creo 1.0 schools edition on my windows 7 64-bit computer. My problem is that I can´t get the PTC webpage to disappear, when creo 1.0 starts. It looks as if creo starts, but the ptc webpage bloks the view. If I try to close the page at the X button, everything gets frozen. Can anyone help.Thanks in advanceJohn

Hi!I've been trying to make a helical sweep within a hollow cylinder, but for some reason the helical sweep doesn't interact with the hollow cylinder (as in it doesn't become embedded on the inside of the hollow cylinder)the part attached should make my point clearer.any help is greatly appreciatedPROBLEM 2:Right now, the helical sweep can't interact with a solid cylinder either - am I using the right tool??

Hi,I am using Pro/E WF 4.0 and also Pro/NCWhen ever I make a modification in my soild model and bring it to Pro/Nc, the program that was previously created fails completely.Is there any possibility that this can be easily updated after any modificatons is done on my model????Even if fillets and chamfers are added it fails???? please help

Hi everyone, I was wondering what everyone uses Windchill for. Our team uses Windchill to report reflections, and for file and photo storage. We also use it for notebook uploading and CAD. We do use Windchill for its version management for final documents.Thanks, Dan

I'm creating an assembly in Creo schools edition but when I try to save it, it comes up with a sign saying each part is not regenerated. When I open it agamy contraints are all wrong and the whole thing is a mess. Help?

I'm designing an assembly using Creo Elements Prof 5.0 schools edition. I would like to constrain the surfaces of two parts to be angled at 120 degrees. The help center mentions an angle offset type that I think will solve the problem. But it doesn't appear as an offset type in my drop down menu. How do I contrain two parts to be aligned a given number of degrees?Thanks.

READ IT.

HI EVERYBODY I KNOW PRO E IS BEST SOFTWARE FOR DESIGNING. BUT I AM IN AN INTEREST TO START TO LEARN MANUFACTRING MODE OF CREO. CAN YOU ANYONE CONTRIPUTE YOUR KNOWLEDGE ABOUT THIS AND HOW CREO SUIT FOR MANUFACTURING WHEN COMPARE TO OTHER CAM DEDICATED SOFTWARES?

Dear experts help please with the solution of the problem in Mathcad

Has anyone encountered this problem?I'm trying to load a Pro/Engineer WF5 file from our ACE Winchill server to my workspace.The file will not download to my workspace. This is the Event Manager error I get: ================================================================Local cache for source "failedRequest" is having incomplete information for merge================================================================Once I try adding this Pro/E file, I can no longer add ANY files to my workspace.I've tried clearing my Pro/E, JAVA and Internet Explorer cache.Two other engineers in my area were able to load the same file from the server to their workspace and open it with Pro/E sucessfully.

Earlier this week, we receved a direct message via our PTC University page on Facebook from a student user in the UK with questions around simulation. Instead of direct messaging back the links, I think it makes sense to share them here, as our Community platform provides more space and user-friendly link posting.Creo Simulate online help front pageThis page talks about convergence methods and optionsThis page talks about assessing results quality and has links to SPA and MPAElite Consulting has a good introduction and comparison of h-method vs Simulate’s p-methodThis (old) document has a good theoretical explanation of Simulate’s convergence methods and references theory papers.I hope this will be helpful for Ikram in the UK and maybe for some other readers too.Bettina

We're using Creo for our FTC team, and we're trying to get a fully functional model before Worlds. In pursuit of that, we have a bunch of questions that we're hoping people can help us address.How can we model a string connection in the mechanism application. Is it possible to pull a piece via string in the model? I've attached a picture to make it more clear what we're trying to do. Is there any way to model zip ties? Especially as far as they bend and interact with the rest of the pieces and environment?In our robot we have two pairs of arms. One to hold/lift the crates (crate arms) which are unpowered, and another that holds the crate arms up (holding arms). Is there any way to model how these interact in the mechanism application? As you can see, the holding arms locks in place, preventing the crate arm from going through it. Thanks!Team 4029

We are relatively new to Windchill...we have some Creo part files that we would like to save in our Windchill project. We have downloaded the Workgroup Manager on to our Computer per the "Windchill Practical Guide." It appeared to install...yet after logging off and logging back on, the "Windchill" Menu item does not appear after opening Creo. Are we missing something?

Hi folks,I'm just posting a shameless plug for my presentation at this year's Planet PTC Live in Orlando, 2012 "Mentoring a FIRST Robotics Team, Unseen Rewards".I hope some of you out there in this forum will be able to attend! If not, I will certainly share the presentation and more here in this forum.This is also your chance to add content to this presentation. Are there specific challenges that you just haven't overcome as a mentor? Is there something that has really worked well for you and your team? I'd like to hear it!Thanks and good luck at your regionals! I hope to see you in St. Louis!!Josh

Hi there guys,I recently bought Creo Parametric 1.0 student edition and have had trouble using the software. The program will load up fine but when I click on a datum or say try to do a sketch or extrude the whole client will freeze and crash the ATI display driver ("ATI graphics driver has stopped working properly") and the driver will restart with the creo window being a blank window pane. I'm not sure whether this is a problem with Creo trying to use my graphics card or just a general problem with Creo. I did notice when looking with MSI afterburner that the GPU load on the first GPU went up to 100% while it was in progress of crashing but the second was basically idle. My comp build should be able to easily handle such a basic task so I was wondering if you guys knew any other potential reasons or possible work arounds.Build:CPU: i7 920CPU cooler: Noctua NH-D14Mobo: Asus Rampage Extreme IIRam: 6 gb 1600 mhz Super Talent Chrome ramGPU: Sapphire ATI HD 5970 OC edition 2gb Vram (This

I have installed this software according to the instructions provided (including obtaining the license) and it seems to complete satisfactorily; but when I try to open it from either the shortcut installed or from the Start menu absolutely nothing happens -- no message, no blinks, and no window. The Task Manager shows no application open. So I cannot follow any of the suggestions under Mathcad Options listed in the instructions. As a side issue, two discs came in the package with the only difference in labeling being date version M005 and M010. No information was provided regarding them. I have tried installing each (after uninstalling the other), with the same apparent success in installing and failure to execute. The only deviation from the installation instructions was that instead of installing, then opening the software to obtain the license, the installation procedure incorporatedobtraining the license, so that when it finished, Mathcad was not open. And I have not found any way

I'm using windows 7 and CREO 1.0 Schools Edition.I downloaded proper PTC install manager and I tried to create License file from PTC install manager, that doesn't work.How can I get License?

Your flight should begin at the First Flight Airport next to the Wright Brothers National Memorial (See http://binged.it/zVFqX3). The challenge is like a race, but the winner is not necessarily the quickest to the finish line, but the team with the best objective function results.   Your objective function results will directly affect your technical merit score.  The higher the objective function value (which you seek to maximize), the higher your score. Your team score will be a composite of your design notebook score based on the National Scoring Rubric (35%), your presentation at the National 4-H Conference Center in Washington DC (30%), and technical merit / design viability (35%).  The teams with the top three scores will present to a blue ribbon panel at the Smithsonian National Air and Space Museum who will determine the winner.You may want to review refueling options that stop at airports in route to allow you to carry more useful payload to increase your ob

I have tried to access Precision LMS through the browser in Creo 1 Parametric M020. No matter what page I try to access I consistently get a window pop up stating Script Error and below the message 'An error has occured in the script on this page.' Any suggestion? Should I only access PLMS outside of the Creo Browser? Incidentlly, I run Creo on my iMac using Parallels 7. Any advice gratefully received.

Hi, this is the first time we have used this program (Creo Elements) and we really are not sure what we are doing wrong. We have a basic drawing that we want to print, but when we select the print option, we do not see any of our Network printers or the big plotter which is also a networked device.How do we tell the program where are printers are?Thanks.

Hi, i got this problem when im trying to execute the install manager for the license. Nombre del evento de problema:APPCRASH Nombre de la aplicación:installmgr.exe Versión de la aplicación:29.0.2011.370 Marca de tiempo de la aplicación:4ecd3943 Nombre del módulo con errores:installmgr.exe Versión del módulo con errores:29.0.2011.370 Marca de tiempo del módulo con errores:4ecd3943 Código de excepción:c0000005 Desplazamiento de excepción:000a621a Versión del sistema operativo:6.1.7600.2.0.0.256.1 Id. de configuración regional:9226 Información adicional 1:0a9e Información adicional 2:0a9e372d3b4ad19135b953a78882e789 Información adicional 3:0a9e Información adicional 4:0a9e372d3b4ad19135b953a78882e789Lea nuestra declaración de privacidad en línea: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0c0aSi la declaración de privacidad en línea no está disponible, lea la declaración de privacidad sin conexión: C:\Windows\system32\es-ES\erofflps.txtSomeone can helpme ? ... im using wind

I downladed creo/proe 5.0 last month for my CAD class at drexel and it has worked wonderfuly but today im getting a message when i open it that says LIcense Request Failed for feature. then it gives a path for the license file and says nolicense server system for this feature and then some more error codes. HELP my final project that im doing in this software is due thursday

I'm running Pro/Engineering 5.0 Student Edition on Windows 7 ultimate 64bit. with intel HD graphics 3000. The processor is a intel core i7 2.70GHz. I'm running this in bootcamp on a macbook pro early 2011. The last time I ran proe was 3 months ago and it ran fine. I recently moved and have a new isp. The other day I launched the program and it starts up but then immediately shuts down? Has anybody else experianced this problem...any solutions?Thanks,Jeff

I was so stupid that I had deleted the license file and emptied the trash afterwards for some unknown reasons. And when I tried to run the setup again there was just nothing poping out after the extracting.What can I do to fix the problem?