PTC Education

I have a problem with my Setup from Creo 2.0.When i try to start the Setup it looks like it starts and it asks me if it is okay to change settings on my PC but then nothing happens. I had Creo but i deinstalled it. And now I am not able to install it again. Is there anyone who can help me or know my Problem?

i need to perform mold analysis for my project work but all i have is student version. Can i perform this analysis using my version. If yes is it possible to perform molten aluminium analysis?

I removed Creo and reinstalled it. The license still does not work. I asked my school's IT department and 2 instructors who teach Creo to assist. It still does not work. Can anyone help resolve this and install / run the program? Anybody?

I downloaded the PTC suite of applications, primarily for using Creo Parametrics for my engineering class.  I downloaded the software fine and can open the applications, however, upon opening, a message box is displayed:"License request failed for feature"and the program closes.  How can I:1. Obtain a free license as a university student2. Register this license with my software after it is downloadedThanks in advance!Jonathan

A student and I both edited the same part at the same time, with one of us somehow not checking it out first.   So the one version was A.3 and the other was A.4.  The A.3 person (me) needed to upload the rest of assembly and could not.   I just threw away the latest revs and reloaded.   So a couple of questions:How did we get into this situation?   Do I need to lock or checkout a whole assembly to prevent others from using it (rather than just counting on Windchill to do it for me)?Is there a way to roll back Windchil to a previous version?   The changes in A4 were minor compared to A3, so would have preferred to discard A4 instead.Rande J.FRC4931

Is there an easy way to add other materials (like AL-7075) to the defaults the educational version of Creo provides?   We're hoping to get into Simulate this year so we need to make sure we have the right properties set.

I was going to post this in the other discussion, but it was getting pretty long and convoluted. I have two questions about the new Windchill installation:(1) Some of the error messages seem to be missing. I'm getting plenty of errors (mostly my fault, of course) but when I go to the event manager, the message field is blank. Cryptic as they are, they can be useful. Is this a "yet to come" feature?(2) Do/will FIRST teams have access to the Design Exploration (DEX) functionality? I've been hoping that the reason we couldn't have it is that our Windchill was old...Thanks,Noa

How are other teams organizing their parts within Windchill?   Right now we have all of our parts in the CAD Models folder, but after 3 years of doing this that's getting to be a long list.  Are other teams using a folder structure?   Any good or bad with that?  Any issues with leaving them all in one folder as we've done?   It is simpler, but does seem to take longer to load a list of parts now.If people do use folders, then is there a good way to move parts around within Windchill?Rande JohnsonFRC 4931 Mentor

Whenever I try to use the link from the installation guide for the Creo Parametric 3.0 or 2.0 it says 404 server failed and it doesn't let me download the file. What can I do to get the creo software for a student?

Hello, I just signed in for the student program to get a licence and use Creo 3.0 and I received an email from PTC but the problem is that I dont find the licence, and I dont know what it looks like and wher to find it on the email I received. Can anybody help me please ?Thanks in advance

no puedo

How to use combo box and how to write the script to display any selected row id value?

I need DsePersistenceProviderPackage.zip file in order to connect to Cassandra, please share a pointer to the file.

Installing and configuring ThingWorx 7.1 Version 1.5Latest Revision Date: September 07, 2016

About ThingWorx ThingWorx Model Overview ThingWorx Use Case Examples Deploying the ThingWorx Developer Trial EditionLogging into ThingWorx Importing Extensions Exporting from the ThingWorx Developer Trial EditionExport Options

For teams using Windchill that have been experiencing issues, the problem can be solved by updating to the latest build version of Creo 3.   To do this, you should request a new product code from - and download the Creo 3 image from http://www.ptc.com/appserver/auth/it/esd/academicFree.jsp. Install the Creo 3 image and enter your product code for licensing. Once Creo is installed you should be able to follow the normal steps to connect to Windchill and access your project.

There is a known issue with the Quality Agent in Creo 2.0 M200. This has been reported to the PTC R&D team, and they are working hard on finding a solution. In the meantime, the academic download page has been rolled back to M170 in an effort to get around the error.If you are having an issue with the M200 version of Creo 2.0, I would recommend uninstalling and then installing the M170 version found here: http://www.ptc.com/appserver/auth/it/esd/academicFree.jspThanks,Chris

Hi there! When I attempt to open the program up, it fails to run b/c it states that it could not run the Quality Agent and if I call tech support to report an error 6. I thought tech support was open 24 hours but no joy on that. Any ideas, or should I just try in the morning? Thank you!!

Hi everyone,PTC is in the process of staging the Windchill 11.0 upgrade for the Academic Windchill server and plans to execute the upgrade next month. I will let you know as soon as a upgrade date is chosen to make sure it does not conflict with any activities you might have. PTC typically does the update over a weekend and tries to minimize the downtime as much as possible.-Scott

The Save Object dialog presents document names as both a sequential name and a Common Name.I had expected that one should not alter the sequential name, and enter a meaningful name for the Common Name.However the document is saved with the sequential name which is meaningful to only a few.How should we utilise these name fields?

I installed it without errors but when I start the application I have a 'stop.exe' error. System error is missing << ucuore46.dll >>, It says that it should be installed to solve the problem, but it remains the same.

I have installed Creo 3.0 Student edition recently it worked fine. After one some time when i try to open creo i get error saying-"Port-conflict" "The previous restart failed. The port 51244 is also occupied. Restart Creo Parametric and all other opened PTC Applications again. We apologize for any inconvenience"With every restart, the Port number counts up. So now I'm at Port 51256.I can't contact any support, because i only have the Student Edition.I use Win 10 64-Bit-Version on a HP Pav Notebook. Does anybody know what could solve the Problem?GreetingsRhishi.

If I have a Mac and I get Windows to do Creo 3.0, does it matter which Windows version? Should I download the manager for Win 32 or 64 DVD?

When I try to install creo 3.0 all but the common files are unsuccessful to install.Next when I press the finish button, nothing appears to execute the program.How should I proceed?

Hello,   I have installed Creo 2.0 Student edition in 2013 and Parametric and simulate worked fine. After one Year the License expired and I requested a new one. I used the "reconfigure.exe" to set the new License path. In Creo Parametric everything worked fine, and i can use it without any Problems. When I start Creo Simulate the following Error occurs: In english: "Port-conflict" "The previous restart failed. The port 51250 is also occupied. Restart Creo Parametric and all other opened PTC Applications again. We apologize for any inconvenience"   With every restart, the Port number counts up. So now I'm at Port 51256.   When I continue and open a .prt file, it loads the file. But then it shows another Error: In english: "License-Control" "Required Creo Simulate License can not be retrieved. Contact your distribution partner."   I can't contact any support, because i only have the Student Edition.   I use Win 8 64-Bit-Version on a Lenovo Ideapad Y-500 Noteboo