PTC University Training

PTC University is participating in a learning industry survey and we are looking for your feedback on how you are using PTC Learning Connector for Creo. Responses will be submitted anonymously, we only need to include your industry. If you would like to be included please answer the questions below by Monday, September 9th. You may post a reply here or send me a private message. Please also list your industry.   How do you use PTC Learning Connector for Creo? What benefits has PTC Learning Connector for Creo provided to you?   As a thank you we will send a PTC shirt to everyone who participates - excluding PTC staff, partner or anyone who posts a non-response.   Kim Springston PTC University Product Management

Hello, I'd like to know if it is possible to become an independent certified trainer, and what would this involve ? i have over 15 yrs. experience with ProE starting with version 18 to Wildfire 4 and Creo. Thank you very much.

I was watching the tutorial on learning connector for creating knurling on a cylindrical surface (http://learningexchange.ptc.com/tutorial/2528/create-knurling-on-a-cylindrical-surface) when I realized there is a faster method for completing this.   Once the initial patterned helical sweep is completed, rather than creating another idependent feature and pattern, it is possible to simply create a plane that divides the cylinder along a horizontal plane and mirror about that. Alternatively if the original extrusion is done symetric about the top plane, one can simply mirror the feature about the top plane.     This will save a little time and has the added benefit of the entire knurling feature being defined by a single profile as opposed to two independent profiles.   I attached a video below to clarify what I mean by mirroring about the midplane.   Hope this helps out a few people!

Hello: any buddy give me tutorial of all data doctor's tools how to used?

HelloDoes anyone have a Expert Moldbase Extension Tutorial that they can share?Any help would be appreciated.ThanksJoe

I have an ambitious engineer that's working thru the WF4 tutorials. This is the material available in WF4 under Help > Online Resources. Unfortunately, the tutorials refer to sample files that we cannot find.Does anyone know where to find the sample files for WF4 Help tutorials? I did a quick search of ptc.com without any luck.Thanks,-TerTerrence McFallCAD Systems AdministratorVarian Medical Systems911 Hansen WayPalo Alto, CA 94304650-424-6039 desk650-799-0179 cell

http://vianceetorres-ccm.blogspot.com/2013/05/krone-kapital-eco-management-jakarta.Biomasse-Kessel behandelt wirtschaftliche BelangeDie Kesselanlage wurde entworfen, um hervorzuheben, wie Biomasse verringern oder beseitigen die Nutzung fossiler Brennstoffe kann. Besucher können sehen, dass den Kessel durch speziell Windows zu betreiben. In der Halle außerhalb der Heizungsraum, der Lärm Ebene und ambient Temperatur steht im Einklang mit dem Rest des Gebäudes.Brennstoff-Kosten wurden um zwei Drittel gesenkt. Verdichtetes Pucks werden mit fast keine verbleibende Asche verwendet; schließlich jedoch werden Baumischabfälle aus Ketchikan-Wanderwege gemahlen und in der Kessel überflüssig für den Transport zu einer Deponie, brennen und andere Methoden der Entsorgung zugeführt. Zenai Swains beachten Sie "Die Firma Krone Ca..."Die Kommission von Umweltaktivisten Prognose 3 Billionen Euro würde bis 2050 auf ihre grüne Revolution Kampagne-EU Energie zu generieren fast völlig CO2-frei.Die Energie-Ve

hello,where can I find the butterfly valve tutorial for Pro/E?A couple of years ago, I did see it somewhere, but I can't find it now...thanks and greetingsbern

Hello,I'm just new to Creo and I'm training with it. It's may stupid but I have difficult with "side milling" I don't know how to mill this part. When I choose a side milling tool, and select that volume, it said that the cut path could not be created...and I can't find any tutorial bout this situationCan you show me some simple step bout thisThank you for reanding and sorry for my English.Have a nice day

Curious if there are plans to improve viewing tutorials/lessons on an iPad? Or is there some kind of trick to it?   Thank you.

Hi all. I wanna make one of my piece moving in a ''Translation'' direction like in this tutorial : http://communities.ptc.com/videos/2532But, the problem is that I don't want any rotation. I just don'tknow how to process to ''block'' the translation of the piece. Help me please !!!

Good day to all and Happy New Year!   Please advise if there are any direct cources/seminars of Pro E in Greece/Athens OR any online courses that I can take and finally get a Certification for parametric design/modelling .   In addition, in order to attend direct or online courses should I swift to Creo product or I can stay with Pro Engineer v5.0?   Thanks in advance!

HiI wan to draw buldings, houses, exterior view only. Is there a template that already has the options for walls,roof, texture etc. ?ThksCharlie

Gurus,I've run up against the limitations of my training: if I configure a contact analysis to run with multiple load intervals, how do I view results for the intermediate ones?Thanks!Jonathan

Pardon the slight off topic interuption, but does anyone have any links to training for VizMockup? I would love a BOOK... but would be fine with some links... Or???thanks in advance...

HiI am trying to get the lens flare effect. I am using Creo Elements and have the Photolux license. Some old tutorials show a properties menu for the effects tab, but I cannot find it.There was a menu call 'Environment Editor' it has Light Effect: Light Scatter, Fog, Visible lights lens flare and Hidden lights lens flare. These effect files are saved as .den.The following images were taken from the old tutorial.This is the current Effects tab in the Scenes menu.So I can use the Options=> Import and select a lens flare.den file from an archive file I have.But that's as far as I can get.As best I can tell when Pro E changed to the Mental ray 3.7+ render all the previous effects are no longer available.Your help is most welcome.Thanks Dan

Hi, Can someone tell me if these is any Certification for FlexPLM? If so, Can you please share details...

... and why you can't afford not to try it!   We have just created this little PTC University Fact Sheet to get you excited about Learning Connector.   PTC Learning Connector is a technology that connects the user of PTC software to learning content from PTC University – right from the desktop.   Download this short PDF to learn what it's all about and how you can get free access to 15 Creo 2.0 learning topics of your choice!

Where do I finf the Primer tutorial?

I am trying to learn how to use the Tolerance Analysis tool since I just realized my company has a floating license for it. So far I have been unable to understand how to use this tool and I can't find any good tutorials to point me in the right direction. Just for reference, I am trying to analyze the stackup in 3 plates that are bolted together in a non-symetric pattern so I need to take into account the hole tolerances and the placement tolerances. I have tried to use the axis for each hole to define the chain/loop for the stackup, but it doesn't work as expected.Can anyone point me to a tutorial that could help (other than the electric motor analysis)?

I am trying to find basic training for the Manikin library, but it would appear that it doesn exist. I have looked on the Precision LMS site, searched the PTC "find training" tool, and even searched around on Google. Can anyone here tell me where I could get training or at least find a tutorial?

I can't import DWG because modelling is telling me that annotation in not in metric   Please someone could tell me how to do that?     There is also a good tutorial to understand DWG/DXF import?       Many thanks in advance.

Do anyone know of a good ProMechanica Thermal tutorial for PCB modeling?Please someone help me with directing me to a sample tutorial link to model a simple PCB with some components on them in ProMechanical, Thermal. I like to do a simple analysis with board temperature and gradient mapping, component and junction temperatures and to analyze those temperatures which exceed their respective limits etc.Thankyou, Kevin.

Our company is a new Pro Engineer customer.One of the reasons we decided to go with Creo Parametric is that we have seen the capability of it in placing rounds that meet at the partingline that cross dis-similar drafted halves.Unfortunately we've not been able to duplicate this on our own. It appears there is much versatility that our Precision LMS training does not cover in regards to Transitions.When placing the round we are able to get 1 set per side to drop in, but they do not meet at the partingline. The given transition options don't appear to include anything that meets appropriately at the partingline. If I'm not mistaken you should be able to get rid of the unwanted transitions and add your own custom transitions.We have tried using variable radii to get a closer match to each side, but this didn't give any new transition possibilities and the given ones still don't work.It would be nice to be able to just drag an edge to meet the edge from the opposite side of the partingline

Steve Meyers, Learning Principal for PTC University, runs through 5 cool things he discovered in Creo Parametric.   Look and feel of the software i.e. ribbon user interface, model tree/embedded browser toggle, Quick selection of edges, vertices or surfaces Streamline entry into the sketcher Sticky right-mouse button menus Shortcuts leading to fewer mapkeys   Watch this less than 2 minute introductory tutorial of Creo Parametric.   What cool things have you found in Creo? Discuss it here.