PTC/ USER Community Networking

As companies look to evolve from a simple engineering CAD data management environment to a fully integrated PLM strategy, they are often faced with two major challenges.  The first is organizing and displaying the data from multiple systems in one tool focused on the context of a Part (Part Centric) so that the entire enterprise speaks a common language. The second is making all the part centric data available for consumption to the casual user without them getting lost in an overwhelming user interface, tailored for the power user. At Raytheon, like most companies, the environment reflects the company's history of growth through mergers and acquisitions as well as the evolution of technology.  The result is a heterogeneous technical environment that utilizes a variety of different vendor tools to manage all the various aspects of delivering and supporting the  products (product development, supply chain management, manufacturing planning,…). This leads to having part da

Hallmark has been on a product development journey for more than two decades. “At times we thought we could develop our own software and for one of our product lines, we did.  Twenty years later, 22 systems, 100+ spreadsheets and more than 50 hand-offs in the process, we have made the commitment to move to one product development process and system across ALL our product lines" The presenters shared the Hallmark and PTC product development journey.

Is your enterprise up and running with Windchill PDMLink, but you have no way of knowing if you or your company is using your PLM product to its maximum potential? This session was a must attend for any enterprise concerned about optimizing itself in preparation for the future connectivity brought forth by the internet of things. The presenter discussed the vast amounts of data that exists within current Windchill PDMLink implementations, and how this data can be harnessed via Thingworx and ThingWorx MachineLearning to expose areas where an enterprise is weakest, and provide options for how to turn those weaknesses into strengths. Attendees learned about the current status of big data analytics with Windchill 11, where PTC is going with these analytics, and what they can do starting immediately to better prepare for future of optimization efforts.

Out-of-the-box functionality in Windchill FlexPLM facilitates the creation of new products based on existing products. This time saving feature includes the option of linking products together in pre-defined relationships. Full Beauty Brands discussed how they used copying and linking to improve the user experience and align data across related products.

This session discussed how to use freestyle in a product design environment, the best way to integrate freestyle tools and techniques with core Creo capabilities to quickly iterate concepts.

Attendees received a roadmap update and learned about the exciting new enhancements in Creo Elements Direct 20.0, along with data upwards compatibility to Creo 4.0.

Attendees learned about the exciting new enhancements in Creo 4.0 in the area of surfacing and graphics.

This session discussed the updates in Windchill 11 that provide new levels of support for Creo 3.0 technologies, specifically Creo Unite and Creo Design Exploration Extension (DEX).  The presenter shared how these technologies deliver new levels of collaboration and innovation support when integrated with Windchill. In addition, the session introduced the new capabilities supporting companies move from simple CAD data management to managing a complete engineering Bill of Materials (eBOM) with Windchill.

GE Aviation has sustained a Windchill implementation for many years, from the days of the “6.2.6 lighthouse” ProjectLink migrations to the latest/greatest release of 10.2. Throughout its lifecycle, it has always been problematic to proactively monitor and measure Windchill performance and availability. Monitoring the application health is imperative in any production environment. No one ever wants to hear “Windchill is Down!” Quickly identifying the issue and resolving it is critical. Sometimes this becomes a “scratch of the head” and bounce…”oh, that fixed it.”  Then you are left with a problem report to identify a root cause that is sometimes impossible to resolve. GE have used a plethora of tools to check the application process existence and heartbeat types of monitors, but by the time they alert you, the problem is typically already affecting the end-user – engineers, change management, manufacturing floor, etc. – all ultimately suffering from productivity losses and ultimate

Are you considering upgrading your current Windchill solution and wondering where to start? Panelists from Cummins, NASA, ITI and TRW discussed how their organizations approached their Windchill migration including the rationale for an upgrade, creating an effective plan to reach goals in a timely and cost-effective manner, considerations for the resources and requirements needed to help the migration process.

Attendee at this session heard from a panel of leading customers who shared their Creo tips to help you learn new ways to be more productive and gave insight on how they are using  Creo.

Options and variants generated in engineering can multiply the complexity of the manufacturing process. Attendees to this session learned how the powerful capabilities in Windchill 11 handle these complexities while advancing the transformation from eBOM to mBOM, mBOM to process planning, and process planning to execution in ERP.

The presenter shared their success story about how the organization implemented Windchill MPMLink into their manufacturing plants. The session focused on how their company: - Distributed design and manufacturing departments all over the world (7 plants total, and 2 of them uses MPMLink now) - Approached process unification between multiple plants - Managed manufacturing libraries for multiple plants in one system (Raw material, tooling inventory, manufacturing standards etc..) - Planned workshop documentation and process plan management (including of how to customize process plan reports according to strong Russian regulation requirements) - Combined the structures for ERP and documentation for workshop

It's impossible to re-use valuable product data if you can't find it: which is why Search in Windchill is so vital to the success of your teams. Windchill 11 offers a brand-new user experience in its Search and Query-Builder functions, including faceted searching for a familiar "Web shopping" like experience, context-driven findings to understand the context of the item under search, and much more. This session showcased these capabilities to demonstrate how Windchill 11 helps you gain even more value out of your PLM data.

Attendees learned how to better understand and improve their Creo ecosystem.

Attendees learned about the exciting new enhancements in Creo Simulate 4.0.

Windchill architects and administrators are increasingly challenged by their corporate IT security departments to make their respective PTC software implementations comply with new polices for using HTTPS, SAML, TDE (Transparent Data Encryption), LDAPs, and Data at REST.This session focused on providing an overview of infrastructure security with respect to how companies can implement Windchill and other PTC software products for enterprise deployments.

Using Security Labels and custom soft types has enabled PACCAR to engage external vendors in the design process much earlier and than previously.This session shared details on the major technology pieces involved in enabling this access, some of the pitfalls and views of PACCAR's specific implementation.

The Transformation: Levi’s PLM team shared key lessons the team learned during the launch process, as well as how they are continuing to support the tool.

In this session, attendees heard what to expect when upgrading to Windchill 11, including case study-centric results to help with project planning and expectations.

Do you know what a User Defined Feature is?  If no, and want to know more, please read on. To help you decide if you want to learn more about this session here are a few questions to ask yourself. - Do you have repetitive sets of features that need to be place on multiple models? - Have you ever wondered how to create a standard set of features for users to place? - Do your designs have similar features with some variances? - Do you have a set of features that are complicated to create but need to be easy to place? If you answer yes to any of these questions then read on! The presenter of this session helped attendees understand a Creo Parametric feature known as User Defined Features (UDF). The presenter discussed the basic functions of the UDF and offered some tips to making more complicated sets of features which could help you with design automation and simplifying repetitive type design features.

Attendees learned about the exciting new enhancements in Creo 4.0 in the area of mold and tooling design.

This session focused on how highly reliable and quality products should be delivered to market to beat the competition.

Are you thinking about replacing multiple Windchill PLM Systems with one enterprise system? Are you envisioning to have a single source for all of your engineering data shared across multiple locations, locally or globally? If your answer to either of these questions is affirmative then learn more. The presenter shared the story of Ingersoll Rand's vision of consolidating 49 factories, 5 PLM systems, and more than 30 change processes all into One Windchill PLM system. The presenter discussed the strengths, challenges and opportunities identified during the 4 year journey that may lay the groundwork for your organization to achieve similar success. The ability to leverage existing global engineering designs, to save engineering time by looking at existing parts and to have a common repository to be able to do that not only speeds up innovation but also helps in achieving operational excellence. The presenter also talked about the cross functional alignment, evolution of the deployment m

There is an evolution in business culture in the way that it looks at design, manufacturing, and product configuration management. The presenter addressed the emphasis required to achieve cultural change to lead a business from drawing based definition to model based definition.