Arbortext

Hi all,Surprisingly, I was only recently asked to do automatically populate thePDF document properties. I ran into one glitch along the way. Although thedocumentation in help is correct, the namespace information on the web ismisleading. The key names are not capitalized and they need to be. Thenamespace info with the misleading references to "title" for example thatshould be "Title" as possible Key values:<usetext source="!<atidmd:DocumentMetaData source="local"><br /><atidmd:DocView mode="bookmarks"<br />destination="topofdocument"></atidmd:DocView><br /><atidmd:DocInfo><br /><atidmd:Entry><br /><atidmd:Key>Title</atidmd:Key><br /><atidmd:Value>Your Title Here - Can be text variable set from attr on<br />root</atidmd:Value><br /></atidmd:En

Hi, Arbortext-ers!You may have seen from a previous post that the Arbortext entry on Wikipedia has been removed. To maintain a neutral point of view and to avoid conflicts of interest, we (PTC) cannot re-create the page. To best adhere to Wikipedia’s policies, we believe the content should be created by others. You can see a prior version of that page here: http://web.archive.org/web/20100701101156/http://en.wikipedia.org/wiki/Arbortext

http://www.salon.com/2011/09/02/paperless_cockpit/The most notable part about this article is:1. It's written from the end user perspective - an actual pilot who will actual be using a paperless solution.2. The idea of the paperless anything around something as complex as a plane has gotten to Salon.com (not exactly the place I expected to read about S1000D or ATA material).

We have just upgraded to 6.0 M020. Since doing so the XSL-FO stylesheets that we use to produce landscape pages are publishing the pages as PDFs upside down. The page is set up as a 11x8.5. Has anyone else experienced this type of behavior? I have tested this using Print Composer and PE Server I get the same results with both.Thanks in advance for all your help.

How to start and restart the Publishing Engine?Is there any specific way to do that?I have a custom style sheet from PTC, need to copy those files to the folder specified in PE server, then install updates, then I need to restart PE server and tomcat server.Reagrds,Sudhi

Hi Steve-- You can execute Arbortext commands from the command line in Windowsusing the -c switch, which means you could set up a batch file to dowhat you want. The batch file would look roughly like this: (untested, debugging leftas an exercise) :: resave.bat :: set the following based on your version/environmentset arbortext=C:\Program Files\PTC\Arbortext Editor\bin\x64\editor.exefor %%i in (%1) do "%arbortext%" -c "save" "%%i" HTH --Clay

Adepters:We use XIncludes extensively for all topics in our custom schema (and, no, we are not using DITA). By default, when you open an entire book, all of the XIncludes are expanded inline. Usually, this is a good thing. However, some of our books have thousands of XIncluded objects and it takes 20-30 minutes to open. I've searched the Help extensively looking for some way to not expand the XIncludes authomatically during an open - but have failed to find any help.Does anyone know of a method for doing this? I would like to have a preference that says, "Don't expand XIncluded objects inline". Then, you could selectively expand those you need to see and edit.Thanks,DaveSiemens* Using Arbortext Editor 5.4, latest patch.

I'm using the atidmd:DocumentMetaData tag to produce automatic bookmarks however I cannot get it to nest correctly. I have a chapter level title that I'm capturing then a subpara title within the chapter.My string declaration is as follows:Chapter Level: <stringdecl textid="chapbmtitle.txt" hotlink="1">Subpara Level: <stringdecl textid="para0bmtitle.txt" hotlink="1">My savetext for the chapter and subpara tagsare as follows:Chapter Level: <savetext textid="chapbmtitle.txt" conrule="!<atidmd:Bookmark state="closed"><atidmd:Title>!,\CHAPTER \,chapnbrtxt,\. \,chptitle,!</atidmd:Title>!,para0bmtitle.txt,!</atidmd:Bookmark>!" placemnt="after" append="1">Subpara Level: <savetext textid="para0bmtitle.txt" conrule="!<atidmd:Bookmark"><atidmd:title>!,para0bmNum.txt,\ \,p0title,!</atidmd:title></atidmd:bookmark>!" placemnt="before" append="1">My usetext on the root tag is as follows:<us

Hello,In our schema we have a attribute called rowsep which is available in <table>, <row>, <colspec> and <entry>. I want to hide this attribute in all elements except <entry>.I tried the dialoghidden option in the dcf file but that will hide the attribute in all element. Is there a workaround of this.Karthik

Hi,We are looking for any ACL training targeted for Developers. I contacted PTC and it seems the self-training they used to offer was discontinued. Wondering if they are any third party vendor classes or self training targeted for ACL Development.Thanks,Raj Pasumarthi

Hi EveryoneI'm having a problem with import/export that i'm hoping someone else may have encountered before!When creating a new map template, the schema (valid and working in Editor and XML Spy etc) I am loading in is coming up with an error and resluts in missing some of the element definitions. (Arbx 6.0 M010)Error dialogue:Schema has been loaded, however there had been some unresolved Entities, Error log file bla bla ...Error log sample lines:Group Not found :h:inlineReferenced Element not found :h:divReferenced Element not found :h:pIt is a custom schema with a number of modules, imports, includes and dependancies. The missing parts come from references in one module pointing to elements, simple types and groups called from an 'included' xhtml-transitional.xsd (standard) module.As everything is fine using this schema for parsing and every other XML tool i have tried, i am thinking that the DTD/Schema reader in the import/export map editor does not like either imports/includes or co

Hi All,We have a customer that has 1,000’s of lines of legacy XSLT templates written for E3 4.x which is using Saxon 6.x.They want to upgradeto Editor 6.x, so we would like to convert/migrate these templates as quickly as possible to Saxon 9.x.The functionality of the templates will not change, so a straight conversion/migration seems the best option, however it's not very straightforward...Does anyone out there knowthe quickest way to achieve this?Has anyone actuallyinteracted with the people who develop Saxon at all?ThanksPete

I created a page set in Styler and then added source edits. I originally set "First Page Header" to None, but now I want to change that to "Same". Is there a quicker way to change that other than recreating the page set from scratch? (And if so, what if I wanted to make the same change for the footer?)I assume I need a different page set per section if the headers or footers are going to be different?

Well I am finally back to working style sheets. Been a while. I recall that one or two folks have been working with the LOGSA provided 40051 XSL FO. I'd like to discuss these files with anyone who'd care to comment. Off line would probably be best, so respond to -.The folks I'm working for now are tasked to update the files currently available from LOGSA (written to 40051-1/-2) to the recently released 40051-1A/-2A DTD. We've been experiencing a fair number of errors and would like to hear if anyone else has had problems with the files.Many thanksLynn

I'm trying to add metadata and bookmarks when publishing a document to PDF using a FOSI stylesheet. I've added a usetext to the root tag however everytime I try to apply the FOSI changes I receive a "Generated text contains unbalanced tags, i.e. begin tags without ends, or vice versa. Cannot insert."I would appreciate any help you could offer,FOSI Code:<e-i-c gi="comdtinst"><charlist><usetext source="!<atidmd:DocumentMetaData source="atend"></atidmd:DocumentMetaData>!" placemnt="before"></usetext><usetext source="!<atidmd:DocumentMetaData"><atidmd:outline><atidmd:bookmark><atidmd:title>Book Title</atidmd:title></atidmd:bookmark></atidmd:outline></atidmd:documentmetadata>!" placemnt="after"></usetext></charlist></e-i-c>

I am looking for the cost to attend the S1000D conference(s). I thinklast year it was in the Montreal, this year in Denver. I need a numberfor management.I thought it was $895 but not sure.d

Hi,I have this code:local i; local dir; local sAppPath; for (i = 0; dir = get_custom_dir(i); i++) { if (match("$dir",'bcfi')){ sAppPath = "$dir"; break; }; } local sTmpSave = "$sAppPath" . '\tmp\currexport.xml' save_as "$sTmpSave"; sh 'C:\Program Files (x86)\OpenOffice.org 3\program\swriter.exe $sTmpSave'It does save the current document in a custom application directory. So far ok, now i'm trying to start OpenOffice, no problem, bet then it fails to open the just saved XML document. I can not figure out the way I should pass the sTmpSave variable to the sh command, please help!?Regards, Geurt Lagemaat

Hi,My DITA Topics are held in quite a complex folder hierarchy and when I publish to Web HTML it reproduces that hierarchy for the output too, however I have found that if there are too many levels then my browser can't handle it.Is there a way to flatten to only one folder level e.g.Now:\Level 1\1.html\Level 1\Level 2\2.html\Level 1\Level 2\Level 3\3.htmlRequired:\Level 1\1.html\Level 2\2.html\Level 3\3.htmlI did a search in Help Center for "publishing dita documents" and it says that I can change this behaviour in the style file but I can't find where...ThanksPete

Hi,I would like to install Editor in the above mode but also set some feature preferences e.g. Import/Export, Print Composer etc.Is this possible and if so how?The only other option I can see is to have a manually amended installprefs.cal file in the \init folder but is there any other options during the install itself?CheersPete

Hello friendI wanted to prove I could amount to something at first I thought this was a joke now its my time to shine give it some serious consideration

there no issue logging to Adepters. -,d

Hi Adepters,Does Arbortext Editor 5.3 M111 has support to Schematron? OrYour suggestions in implementing the same are appreciated.My requirement of Schematron implementation, is to run as a follow on process when “check completeness” toolbar option is executed, and any schematron errors should show up in “Arbortext Editor Completeness Check” window.Thanks in advance,Suresh.

Is it possible to disable the scroll wheel functionality in Isodraw, so if the user uses the scroll wheel the graphic won't zoom in/out.   But I would still like to maintain the zoom functionality via selecting the zoom tool.

Hi folks,I'm using Arbortext PE 5.4 with a FOSI. I have a publish job that needs to use DirectPDF to add custom PDF metadata including document properties and bookmarks, which is not possible using Adobe Distiller. Can I dynamically switch the usedistiller=off from usedistiller=on without a Tomcat/services restart to register the change? Is there a way to support Distiller and DirectPDF configuration on the same PE server? If not, the obvious choice is to move away from Distiller. But are there any benefits to using Distiller instead of DirectPDF? The reasons we use Distiller is unknown to me.Thanks in advance,Bryan

Creo Illustrate was opened as a community today. Join the Creo Illustrate 3D Technical Illustration Community-Scott