Arbortext

Hi everyone!I tried to create a trialkey for Arbortext with my Host-ID using this page.I entered my Host-ID like this 00-11-AA-BB-22-CC (not my real Host-ID), but I get redirected to this error page all the time.Can you tell my, why I cannot generate a license file?

We are in the process of updating to TIA from SMA. Currently with SMA we have two stylesheets one for Editor and one for print. Is this common? What are the disadvantages if we only have one? Benefits of having two?ThanksBryon

Hello,Here's a brief overview of the situation;We have 4 licences in total at the moment, two for IsoDraw 7.1 with CADProcess and the other two for IsoDraw 7.1 Foundation, running from a licence server, the problem currently being experienced is that we cannot open IsoDraw 7.1 in foundation only mode because it defaults to opening with CADProcess thus not allowing computers to run the foundation licences.Could the problem be caused by the command line used to launch the software (missing command, etc.)?Command Line: C:\Program Files (x86)\PTC\Arbortext IsoDraw 7.1\Program\IsoDraw71.exe==Edit 05/02/2016==Stated in the screen capture below, newer versions of IsoDraw (7.3) allow you to choose which one is activated from inside a UI, while in older versions (such as ours) the command line was apparently the only way to set the licence options.This is why I think a modification to the command line above could fix the problem we face, does anybody know what that modification would be?Regards

I know, we are dinosaurs. But I have been told that Print Preview is not available on 5.4. We use it on 5.3, but for users with 5.4 Print Preview is grayed out. We are moving a group to 5.4 and would really like to have Print Preview.

Our editors rely on a handful of toolbar buttons that were removed in Arbortext 7.  I have most of them replaced, but I still need to tweak one of them.I've been digging through the Arbortext 7 Customizing Guide trying to figure out how to create a new toolbar toggle button that restores the Document Map button that toggles between Document Map view and Normal view.  I haven't found a solution yet and thought someone here might have done this already.  I currently have a button that shows the Document Map view, but in order to duplicate the functionality of the button as it existed in Arbortext 5, it needs to toggle between Document Map and Normal views.  Has anyone done that yet or know how to create such a button? Here's one of the custom toolbars I assembled with the Document Map button first in the set:<toolbar id="toolbar_Randy_Views" name="GC Views" x="50" y="25"><?Pub Dtl?><button command="ViewDocmap" id="Toolbar_Views_Randy"image="imageDocumen

Still rather new at this SGML stuff.  I'm assuming this is a stylesheet issue, but don't know what to look for.  Here's the problem:First, what works right:  When I create an xref to a step1, the xref generated text shows, for example, "4.3 a".What doesn't work right:  When I create an xref to a step2, the xref generated text *should* show, for example, "4.3 a (1)", but instead shows "4.3 (1)" (leaving out any reference to the intervening step1); if I xref step 4.3 b (1), it shows the exact same thing ("4.3 (1)"), which is clearly not helpful.A similar problem exists when xref'ing step3's and step4's:  Instead of "4.3 a (1)(c)" I get "4.3 (c)" (leaving out any reference to the intervening step1 *and* step2); etc.We're currently at Arbortext 6.1 M30, but we had the same problem with Arbortext 5.3 (identical stylesheet).As I said, I assume this can be fixed in the stylesheet, but I need someone to point me in the right direction.  Any guidance would be appre

Hi I am trying to create a glossary. I have created all the glossentries. (Which have (indexlist) in brackets in their names.) They will not attach onto the Glossary list. A No Entry sign comes up.What do I need to do?Thanks

Conrefs and hrefs (content references and links) that worked in a previously published representation do not work in the current representation published from WIndchill, the links are right in Arbortext - this seems to have popped up since the Publishing Engine was updated to 6.1 M070 from M030.  The JPG file attached shows errors in red that is appearing where hrefs were used to point users to other related content. These links appeared as expected before the Publishing Engine was updated, and afterwards these errors are the result.Has anyone else seen this? Any ideas? I have escalated to PTC support as well, but thought I would mine the greater mind of the community as well.

We have a model name that has an Italicized letter in it. How do I get the keydef to support italics?ThanksBryon

I'm trying to get children of current node by using xpath in APP source edit mode!Can it be done in this way?

Hi, all. Sometimes I want to comment out my DITA code with XML comments (Insert > Comment.)  But when it's time to uncomment it out without going to the untagged view, I'm stumped. What's the easy way to do this?ThxSteve

I'm adding an options file for our flexnet license server. In the options file I want to specify a TIMEOUT option for our print composer license. The line I added is "TIMEOUT 284 300." 284 is the print composer module and 300 is the number of seconds after which the license is reclaimed. When I restart the license server and check the log file it tells me that the print composer has had a TIMEOUT set for 1200 seconds. Any value less than 1200 results in the same outcome. Any value greater than 1200 results in the actual value being used. Is 1200 the minimum amount of time for a TIMEOUT? Is there anyway to override this minimum?Thanks,Rick

I was wondering if there are other ways to configure PE to publish multiple jobs from PDMlink other than setting up another PE server.  I was wondering if there would be a way to do that with sub processes?Any help would be greatly appreciated!  - Brian

There is a request to add c-size drawings to our manuals. I would like to know how to add it to my style sheet.This is what I have done so farIn styler:1. Make a copy of the existing stylesheet.2.  I go to Page Type, I locate the the foldout (11 X 17) that we currently have defined and I copy all the types and rename them to foldout2.3. I then go to page set, locate the foldout page set, copy it and rename it foldout2 page set. In the page size I change the page size to C size. Under page types I change the page types to reference the new foldout2 page types.4. Keep the page region the same5. Click on the element foldout, copy and paste rename to foldout2. It states that this new element is not in my document type. I cannot figure out where this is. Is this my servicemanual.dtd? I have searched the file for the word foldout but it is not in there. I read through the adding new elements to your stylesheet article in the help, but it does not cover the error message a20377.ThanksBry

I have opened a document from ACM that includes several bursted objects or fragments. Selecting Edit > Edit Selection as XML Source results in:<cards><xi:include href="x-wc://file=0000119577.xml" xmlns:xi="http://www.w3.org/2001/XInclude"><xi:fallback><!--Fallback markup for "x-wc://file=0000119577.xml"--></xi:fallback></xi:include><xi:include href="x-wc://file=0000119576.xml" xmlns:xi="http://www.w3.org/2001/XInclude"><xi:fallback><!--Fallback markup for "x-wc://file=0000119576.xml"--></xi:fallback></xi:include><xi:include href="x-wc://file=0000119575.xml" xmlns:xi="http://www.w3.org/2001/XInclude"><xi:fallback><!--Fallback markup for "x-wc://file=0000119575.xml"--></xi:fallback></xi:include></cards>Typing "edit -current -untagged" in the Command line presents similar results. Is there a way to edit those fragments as XML?Thank you,Lisa

Hello Guys!So I'm working on the creation of an XUI dialog in Arbortext Editor, what I would like to know is if there's a way to avoid to create the dialog twice. The way how I create the dialog is creating a new option in the menus bar and from there I call the script to create the window. I have another window and I'm using a global variable to store its ID so I can validate if the window is active or don't, however I think I can improve that method.Any ideas? In advance I appreciate so much your time!Paulette

How to activate isoview with Arbortext Editor? Perhaps I must re-install Isoview but how to do ? Actually the illustration are displayed in Arbortext with CreoView, I want to change because the quality of the illustrations are bad when I print in PDF. Can you help me ?

Hi Everyone, While recording  the macro in Isodraw 7.1, Object window comments are disabled. How can I record Find object . Please see attached snap for your reference. Thanks byArasu

I got a new computer and loaded Isodraw onto it.  How do I go about transferring all of my preferences files (pens, libraries, etc) from my old computer to the new computer?

Does someone have an ACL script that can replace all text in a document with "xxxxxxxx" or make them otherwise unreadable so we can sanitize our production documents before sending them to PTC Support?

During the PTC webinar yesterday for whats New in Creo Illustrate 3.1. Someone asked a question and the presenter refer to an overlay in isodraw. Can someone tell me what this featrure is?ThanksBryon.

Out scenario is this:   We're using the IsoView plugin for Internet Explorer to view .cgm files. This has worked on out terminal servers running Windows 2008 Server R2 and Internet Explorer 9.   Recently, when upgrading to Internet Explorer 11, some of the users (but not all) are reporting that they can't view .cgm files anymore. They only get that little black box with a cross in it, which indicates that the plugin is not working (the plugin I'm referering to is the one below named WebCGM....it doesn't show up under Manage Addons in Internet Explorer for the affected users).   The install media we used was IsoView73.exe (file version 7.3.30.15) and it was a prereq to CreoView32(with file version 10.2.20.23),   We have attempted to re-install IsoView73, both in modify and in repair mode. It didn't make any difference.   I have a test user account that the plugin is working for, but with this account I can't replicate the problem. All tips are welcome.   O

In IsoDraw 7.3, I create an illustration as I want it, then save it...when I re-open it, all the sizing and line weights have changed.  How do I fix this?@

I am using DITA in Arbortext Editor version 6.1, datecode M020.What do I need to do to make revision bars show up when I generate a pdf of a book?I went to the help menu, and it says to open Modify Attributes and to choose an option from the revisionflag field.  The options are supposed to be "added", "changed", "deleted", and"off".There is no revisionflag field. There is a rev field under the Other tab, but it does not have dropdown options.  But I tried "changed" inside a step element.  No go.  Does not work. No change bar showed up in the pdf.Not only that, but it would be an understatement to say that having to do this manually for every change I make to a book would be a ridiculous increase in workload.  Isn't there some way to have this done automatically?

Practical FOSI is now available for sale at the FOSIexpert website at FOSIexpert.com/Practical-FOSI.Practical FOSI contains more than 900 pages, including almost 500 figures and a detailed index. It is priced at only $30.00, which includes shipping and handling. The book is delivered in an email attachment as a password-protected PDF file that includes linked tables of contents, cross references, and index entries. The password-protected book is for the purchaser's personal use only. Please see the Licensing Agreement for details. NOTE: Those who have purchased the FOSI QuickStart Tutorials in the past should have received email with a discounted price. Anyone who orders the tutorials in the future (FOSIexpert.com/tutorials) will also pay only the discounted price for Practical FOSI. Those who have not purchased the tutorials should visit FOSIexpert.com/Practical-FOSI.The purchase transaction is handled by PayPal, but credit and debit cards are accepted as well as PayPal accounts. Plea