Archive Read Only

Hi Folks, Just asking if anybody would be willing to share their thoughts on benddetails for 316L Annealed SS?We are going to be air bending 10 gauge (.135) with 3/4" V dies, thiscombination is a bit off the charts so I'm anticipating it might notconform to one of the standard bend tables. BTW, which bend table would normally be used for 316L SS? Thanks! Regards,Walt Weiss

I received a CimatronIT native model which contain a very simple geometry but only surfaces. I'd like to join those sufaces to obtain a volume and then solidify it! Someone can theach me the way to do it? Thanks

hi all I am trying to unbend a geometry which I made by the blend(parallel) of two ellipses at 100mm height. First I have ripped it but still I unable to unbend it. thanks to all.

Is there an option to modify the SKETCHED Line Thickness? Being color blind, it can be a challenge when working with complicatedparts....Doh! Thanks in advance! -Art ProE Wildfire 2.0 ..This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately.

HI all, I have a sectioned view (Full unfolded) - say right viw. Now I created a detailed view from that section view (from the area that has been unfolded). I have shown hatching in the right view. It reflects in the detailed view as well. I dont want to show hatching in the detailed view. Is there any way to do this? I tried to make the hatching of detailed view independent of parent view and then erase it, but that doesnt erase the hatching from detailed viw. Thanks, Ankur

Dears,Is there anybody who is running Pro/E Wildfire 4 and PDMLink 8.0 M030?More generally, is there anybody who is running Pro/E and PDMLink with versions which are not supposed to be compatible according to the official compatibility matrix published by PTC.Thank you and Best Regards,Vincent

The query on SpaceExplorer display problems prompts me to ask something I have wondered for a while. Out of the product range:Pilot PRO, Pilot, Explorer and Navigator (a) have you compared them objectively for use with Pro|E (WF4 here) and/or (b) what personal preferences do you have?I have a gut feeling that too many keys/displays/options might be a disadvantage - but actual experiences would help me a lot.TIAJohn PrenticeNottingham, UK

Is any one else having problems reaching PTC website? We arereceiving an Apache bridge error here - no backend server available.

after installing AVG anti-virus software I now get the start up error "Xerces Panic Error. could not load a transcoding service" Pro-E won't start up now. anyone know what that means? Thanks in advance

we are considering using IIS to make a single sign authentication methodwith ISA easier. I am wondering if anyone has any experience with this and if you had any issues regarding performance, configurabilityetc...thanks for any help....Dan PaulucciSteelcase Inc.616-291-8878

I will be participating in an interview for a designer position. If youhave a list of questions to ask a potential hire to help determine hisPro/E skills, and would like to share with me, I thank you in advance.

test post

Thanks to all who responded. The exploder community is always awesome!!!I had two issues:1 - programmers count starting from zero, so my syntax error was actuallyon the line with "pen 8."2 - I did not include a space before the inch designator, hence the error.Enjoy your weekend, everyone!-Lar

Just checking to see if this email exploder is still active (?)...There is a new "CADDS Veterans" group on Linkedin.com at:

Is there an option that allows you to delete/suppress an individual group member without having to ungroup or drag the member out of the group? (I am using WF3 M200) If there isn't, I would like to suggest that it be seriously considered in the future... I am having to redo many hours worth of work because I deleted an unneeded csys and its children, unfortunately one of those children was in a group and I didn't realize it until it was too late (and I had done too much to just reload)

Hello,are there any options controlling the sorting of the files on the "file open" dialog box?I would like to have a sorting like the "sort by name" that windows do.Proe WF 4 gives the following sorting: Below is the sort by name from windows.Thanks in advance.Vassilis Anagnostopoulos**SPIDER SAIndustrial Area - Rodotopi45500 - IoanninaGreece

Thank you to all who replied, it was good to see that my situation was not unique. A lot of people gave me the same solution which was to add "/Userva=2900" to the boot.ini file.That worked just fine and I thank you all.Michael WimberlyEngineering Applications Support Specialist IISecurity & SurvivabilityBAE Systems Land & Armaments9113 Le Saint DriveFairfield, Ohio 45014 U.S.A.(513) 881-4843 Direct(513) 833-3565 Mobile(513) 881-5087 Fax-<">mailto:->P Before printing, think about the environment.

Does anyone know, which Release of Pro/E can save as to a 3D DWG?Brian S. LynnTechnical Coordinator, Product Engineering

I am a student and would like to purchase ProE 4.0 I don't have much money and don't want to spend a whole lot on it. Any info will be greatly appreciated. Thank you

I am desperately searching for the entire online manual for Pro/Engineer 20 published by PTC in 1998. Can anyone help me track this down? I think I've exhausted my resources.

Hello all I desperately searching for a v7.0 ME10 or ME10 2000 + also paid. Who I can ' help. It is a version that I use for several years and I am very well and is the only cad I know. Unfortunately the company for which work has brought me into mobilizes ' 52 years and then the possibiliota ' a my reintegration into the labour market seem quite remote. Having this software I could work with withholding tax and raccimolare some penny. Thank you

I am trying to download ProE to my computer and after downloading the zipped file of cd1 to my computer my zip program winrar shows an error saying "the arcive is either in unknown format or damaged". What do i need to do?? Please help!!

Hello all, I have received pro engineer files from a client that I need to import into 3ds max, can someone point me into the right direction on how to achieve this? I know npower has a translator but there has to be a lesser expensive way? Are there services for this kind of work? Greetings

You would think there are quit a few PTC/USER CAD members in Houston, just itching to get together and see what's new with Pro/ENGINEER WF5.0. So let's find out. When: Tuesday, December 19th, 6pm Where: 2625 Bay Area Blvd., Houston, TX 77058 Who: Any PTC/USER member / PTC Customer Why: See home grown applications Lockheed Martin is using to do Space Radiation Analysis, as well as what is new and how to get the most out of Pro/ENGINEER WF5.0 Pizza provided as well.

Does anyone have a model of a banana plug that they are willing to share? ThanksDenis