Archive Read Only

Is there a way to view the results of an analysis as a cross-section through the body/bodies? I'd like to see the distribution of stresses inside the solid body.... Thanks, Kieran Coghlan.

I guess I'm having a Monday moment... I can find tap drill sizes for every type of hole, except for the ones I need - UNEF. Can anybody point me to this information?Thanks in Advance,David

Hey there,Looking for more information on what exactly clearing the Server Cache in Pro/E does.Are new and modified parts that have not been uploaded or checked in safe?How often should it be cleared?Any best practices concerning the cache that you use?From the help files:<h1>To Clear the Cache</h1>Click Tools > Server Registry. The Server Registry dialog box opens.Click the Cache tab. The Cache tabbed page opens.Click Clear. The cache for all of your workspaces is deleted.(See attached screenshot for what I am referring to)

Appreciated, if anyone can share case studies Electrical Wire harnessesshowing advantages of the software module With Best Regards, Rajesh

Hi AllWe are a company building luxury yachts and using ProE to do our Structure and Engineering.and i have been given the Task of bringing our Furniture/Fitout department in to ProE World. and they are asking is there anywhere that we can get Xhatch patterens similar to the AutoCAD patternsi understand the argument that they should use what they get, but i am trying to make there move as painless as poss if there is anyone out there that can helpmany thanksDavid

I am looking to make an offset section, using the option one side. I can add an offset section with the option BOTH sides, but when I choose ONE side, it does not work. I am using WF4.0. Dennis

Hello, This is off topic, but I am looking for advice. I have a presentation togive at an Inventors Network tonight. I have a prototype, and of course Ican bring my laptop containing the CAD files, although I do not know if thatis necessary. The prototype is a consumer goods / house-wares product (with provisionalpatent & trademark), and I am wondering how other people have presented inthe past at similar functions. What do you think the flow or outline of thepresentation should be? Not sure if I want to spend much time of the CADaspect as fooling around with a laptop could be distracting to the audience. Mostly, I am interested in an outline of the steps one should go throughwhen presenting a product to the audience at an Inventors Network. Chris

I am looking for any site from where I can download the open wrench pro/e model. Size 12X 13 mm and 140 long. Singh.

Ich versuche aus einem 3D Modell eine 2D Ansicht zu generieren. Dabei stürzt das System ab mit der Meldung: LISP-Fehler: NIL is not of type STRING Wer kann mir weiterhelfen. Ach ja: Ich benutze die Version: 20.00 (20.0.0.34) vom 06.03.2008 Gruß Jost Becker

Attention Pro/ENGINEER designers: Desktop Engineering’s “Change The World Challenge”In this age of tumultuous and alarming economic news, it is good old fashioned innovation that will come to the rescue. If you or a colleague are working on something that will make a positive world-changing impact on our lives, or those of our children or grandchildren, let Desktop Engineering Magazine know the details by August 17, 2009. • More information: www.deskeng.com/changetheworld• Submit your entry: http://www.deskeng.com/articles/aaarjf.htm• Or email PTC’s Public Relations group and we can help you with your submission: -

Hi all, I'm adding a parameter to my model, I name it, set it to a YES_NO, enter the value (as yes), but can somebody please tell me what the "designate" tick box is all about. Thanks.

Hello, I am not able to edit the placement of the sketch. No dialog box opens when you select "edit" of the internal sketch, directly goes to the sketcher for editing the sketch. This happens for sketch curves also.

This is a request for my friends at Caterpillar or the ProE User Community.I need the outer geometry of a CATERPILLAR 3512B marine engine.Do any of you have a 3D model of this engine?Thanks in advance.Ronnie Shand

If I was to want to clear out the cache for a Ilink 8 client, what files/folders would I delete?

Can productview open UG, Solidworks and CATIA files or can it just open ProE files?

Good morning all, Please take a look at the attachment. Has anyone out there gotten the error? I thought I had this fixed and all was good for several weeks but it popped up again this week. In most cases the user only needs to select NO on the "Do you want to switch to offline mode?" and then click on the OK button on the next pop-up. A select few need to end task for Pro/E which takes them totally out of the PDMLink and the session in their workspace. This issue comes up only after starting a session of Pro/E logged into PDM workspace. If you had gotten this issue, what did you do to correct it? Rex Snider CAD Systems Administrator TTI Floor Care North America 440.996.2310

Hi, sorry I didnt no where to post this. I was wondering if some one could please make a metal drawer rolling runner. It just needs to be the basics of it, not looking for it to be 10/10 as long as you can tell what it is. here is some links to some pitcures. http://i.ehow.com/images/GlobalPhoto/Articles/4811298/126538_Full.jpg http://www.made-in-china.com/image/2f0j00uoaTLBQrBtgCM/Drawer-Runner-Drawer-Slide-Bottom-Self-closing-SBD-04-.jpg http://www.albionextrusions.co.uk/acatalog/runners_bottom_fix_metal_drawer.jpg http://www.made-in-china.com/image/2f0j00jeAaELGJCTkBM/FGV-Drawer-Runner.jpg http://www.albionextrusions.co.uk/acatalog/Drawer_runners.html Or you can find simplier ones by googling them on google images or in the search bar Please can some one make any of the simplest kinds of metal drawer rolling runners? It doesnt have to be fancy. Like instead of make a edge curve you can just make it straight. As long as it shows the rolling wheel though. Please?

If anyone is in need of a high quality suit, here's a website, I bought six suits from this place.....TOP OF THE LINE, these suits retail for over $800 at the malls. Pure wool, super 150's, better than anything you will get at Macy's etc. at 1/10 the cost. http://mensitaly.com/ Every mow and then you'll have to wear a suit to work office parties, ect. You will look like a million bucks in one of these. These suits are by far the best I've ever owned.

Not if, but when?

All,I am having an issue with a system here. I have had two user log in andthey are both unable to create an operation in the NC environment.Whenever we try to define a work cell or operation it becomes visible inthe model tree, but we get an error saying that the operation has beencancelled. Has anyone else seen this behavior or better yet have aresolution to it? ThanksBrian

Hi. I'm trying to either convert this file to a CAD format file or load the file, trace the geometry then save as a CAD file. Any suggestions? Thanks, Wayne

I've downloaded the software wildfire 4.0 M092 and unzip all the files. But the setup file isn't working. What should I do?

If you do aFlat/Recursive Item on the parts list. Will that affect your balloons?

When activating a subassembly, the command Edit - Component Operations - Megre is grayed out. Is that the supposed to happen? The command Insert - Inheritance (or Merge) is not what I want. Using Wildfire 4 M050 - Thanks.

I need to import .SAT files (ACIS) into ProE WF3. These come from a FARO arm (probe). I can only import the planes, but lines and points don't translate. Anybody can help?