Archive Read Only

Hello all,Does anyone know if a skeleton model can be converted to a regular model? TIABob FrindtSr. DesignerParker Hannifin CorporationParker AerospaceGas Turbine Fuel Systems Division9200 Tyler BoulevardMentor, OH 44060 USAdirect (440) 954-8159cell: (216) 990-8711fax: (440) 954-8111-www.parker.com

I just stared using emx 5.0. Is there anyone else using emx 4.1 or 5.0.

How can I give data to my co-workers if I use Wildfire 3 and they use Wildfire 2? Thank you: I hope I don't have to repeat the whole work of the last 2 weeks in the Wildfire 2 version... Thanks and I wish you all a happy new year. Domenico Cacciatori

Morning everyone,Sorry for the last message, my fingers grew for a second and sent it prematurely.I have a file that I need convertedto a pro/e native file.The file is a Unigraphics NX4 file and I need it to be a .prt (ideally) but even a .stp file would be great. Does anyone have the ability to convert this file for me. Free would be the best way but ifso necessary, I am sure we would pay to have it done if all else fails.I will sent the file to those that respond.Thanks,Shanesv1@valmont.com

Morning everyone,I have

On the 2/01/08 I had the misfortune to run MS diskcheck. The result is that I can no longer run CoCreate PE. I get a start but across the top I get a partial message. The message reads:Lisp error ""The variable Rservice a (the a has ^ this sign over it)is unbound This may have been caused by :(1)Entering a string that wasn't enclosed in quotes,(2)Entering a command belonging to a mo,The message ends there. The program will not respond anymore. After working for a couple of months and making good progress,I am at a loss what to do about this problem. Regards, STWO

When I am sketching, I find that I need to offset a series of lines I have drawn, but I cannot find an offset tool. The only offset tool there is only works when creating an entity by offsetting an edge, but the edge has to already be created before entering into a new sketch. I would like to be able to sketch a series of lines, the offset a certain distance from each other. I think this is pretty basic, and I know the other CAD packages have this simple capability.

Is there an easy way to convert WF2 .mat files to WF3 .mtl files? TIA, Cheers, Roger WillsonGlobal CAD Manager SRAM Corporation1333 North KingsburyChicago, IL 60622312-664-8800 x1358- THE POWER OF BICYCLES(tm): Contribute to World Bicycle Relief

My units are set to inch and I would like to change them to mm. How do I change units? Thanks.

Hi All! Pls send me also the relted topics of B.O.M. Regards; Surendra Verma 09911157709[/b]

I need grounded my dimensions in my sketch to know if they are totally fix when I move some point. How do that ?

When I am opening an asm and get an error upon opening, I usually suppress or clip supress to get by the error to open the asm. Question: 1. What is the difference between suppress and clip suppress and freeze. 2. Is it possible to see the suppressed components in my asm tree after the asm is open? Because now when I suppress them there is nothing visible to see that components are suppressed. It appears as if they dont even exist in the asm tree.

Dear my friends: I am very glad to own this chance to send my best regards to all my friends and teachers, though we are at different areas of china, the firm relation and love makes us feel that we are live together, live happy life and struggle to a better life for ourselves, today is christmas, hope all of you happy and have a better atitude towards to the new life in the coming new year! -2008 TKS! Winking Young 2007/12/25

To view this newsletter in full-color:

To view this newsletter in full-color:

Apologize in advance for asking such a stupid question but I read thefollowing link and I'm a bit confused:

Update Advisor told me this: This tool has been taken offline for significant maintenance. Look for anew Update Advisor in the summer of 2008 Does PTC have an alternative solution until the Summer of 2008? Cheers, Roger WillsonGlobal CAD Manager SRAM Corporation1333 North KingsburyChicago, IL 60622312-664-8800 x1358-

Thanks to all that have sent me models and various web-sites. The web-site list is below and, if anybody has a need for the models,just let me know. Special thanks to Ronnie J from the sunny Texas whopassed me along a bunch of models.I can feel is Christmas time!Happy Holidays to all of you

When I runa mass properties calcin WF3 M120, the calculation runs in the pop up window and as soon as it is done it immediately closes this window. I do not get the opportunity to review the info, and the windowis not hiding nor is it minimized. Pro-e just closes it.Do you know what is going on? Thanks in advance.

Hallo, ich erhalten beim Starten der OneSpace Personal Edition folgende Fehlermeldung: ""Keine gültige Lizenz für die CoCreate OneSpace Personal Edition."" Danach beendet sich das Programm. 😕 Sebastian

Any idea ? Thx in advance for help!

Next to the component or subasm in the asm tree there is a symbol that looks like II, sometimes there is another symbol II with a little empty box in the lower right corner. Anyone know what these mean. I think the II means the component is not fully constrained the other symbol with the empty box I am not sure of.

Hi ChapsWhat happened the the update adviser!??Does anyone know of a site that would give details on specific date codes? What's good and what's bad, that sort of thing...We are currently using WF3 M110..Any Ideas / advice would be much appreciatedThanks in advanceJon Tribe

Please see a summary of replies to my latest dim question ( 🐵 )below:

Need a little help, Windchill 8.0A little new to this!I'm in commonspace and I want to "add to workspace" files. I know how todo, one file at a time. But I want to add 27 to my workspace. What and wereis the command?