Archive Read Only

Thanks to all that have sent me models and various web-sites. The web-site list is below and, if anybody has a need for the models,just let me know. Special thanks to Ronnie J from the sunny Texas whopassed me along a bunch of models.I can feel is Christmas time!Happy Holidays to all of you

When I runa mass properties calcin WF3 M120, the calculation runs in the pop up window and as soon as it is done it immediately closes this window. I do not get the opportunity to review the info, and the windowis not hiding nor is it minimized. Pro-e just closes it.Do you know what is going on? Thanks in advance.

Hallo, ich erhalten beim Starten der OneSpace Personal Edition folgende Fehlermeldung: ""Keine gültige Lizenz für die CoCreate OneSpace Personal Edition."" Danach beendet sich das Programm. 😕 Sebastian

Any idea ? Thx in advance for help!

Next to the component or subasm in the asm tree there is a symbol that looks like II, sometimes there is another symbol II with a little empty box in the lower right corner. Anyone know what these mean. I think the II means the component is not fully constrained the other symbol with the empty box I am not sure of.

Hi ChapsWhat happened the the update adviser!??Does anyone know of a site that would give details on specific date codes? What's good and what's bad, that sort of thing...We are currently using WF3 M110..Any Ideas / advice would be much appreciatedThanks in advanceJon Tribe

Please see a summary of replies to my latest dim question ( 🐵 )below:

Need a little help, Windchill 8.0A little new to this!I'm in commonspace and I want to "add to workspace" files. I know how todo, one file at a time. But I want to add 27 to my workspace. What and wereis the command?

Has anyone find a way to make the workspace table columns in Windchill 8.0wider?

Pros,When cleaning up ordinate dimensions is there a setting for adding a jog to close spaced dimensions?see file for exampleRob Parsons

How do I disable the Web Browser option upon startup?TIA

Does anyone know what's going on with the Update Advisor?I can no longer find it under the support pages.I still had this link:Gerry Champoux Williams International Lead Engineer 2280 E. West Maple Road Information Technology Walled Lake, MI 48390 ' (248) 960-2816 7 (248) 960-2607* - * www.williams-int.com

Though you would be interested in this article on ralph grabowski's bloghttp://worldcadaccess.typepad.com/blog/2007/11/maybe-this-is-w.htmlNon-Japanese CAD companies openly admit they have problems selling their software in Japan. Some of them blame their staff their or the way the sales structure is set up. Have any of them given a thought to pricing? <u>Pro/ENGINEER Walker</u> did. I've converted the prices listed by the site to US$. Note that some countries include all sales taxes in the retail price, while others exclude it.<u>Foundation XE package</u>USA - - $4,995.Japan - - 985,000 Yen = US$8,700.UK - - £4,500 = US$9,500.Germany - - €6,390 = US$9,400.I can understand some price differences for translated versions but the UK version is identical to the US and downloaded from the same website.These prices are anti -competitive as we compete against US businesses for the same business - how can we do that when our principal CAD system and many other types of

All,Is there an easy or built-inway to toggle Preselection Highlighting ON and OFF? Or do I just need to create a mapkey? I tried to create one mapkey for toggling ON/OFF but this did not work. I probably need to create one mapkey to toggle ON and another mapkey to toggle OFF.How do I query select using Preselection Highlighting? I repeatedly press the RMB and when I accept with the MMB, the entity never gets properly selected.The Query Select functionality sometimes turns itself off. In other words, when I want to Query Select, I click the RMB and select an itemwith the LMB. I then repeatedly click the RMB until the item I want has been highlighted and I accept with the MMB. My problem is that the initial RMB click that takes me into Query Select mode doesn't always take me there. I end up having to click and hold the RMB, use the pulldown menu, and manually select Query Select.Sincerely,Neal RosenblumGeometrix Engineering, Inc.201 N. 13th AvenueHollywood, FL 33019Ph: 954-920-2049Fax:

Anyone know of an easy way to create a Table to be Parametric with a point file in a model?WF2.0Douglas Bowles/Sr. Mechanical Designer [DKBowles & Assoc. Inc.]

Hallo alle miteinander, wenn ich meine Voreinstellungen für die Bemassungseinstellungen ändere interessiert sich OSD herzlich wenig dafür. Sobald ich etwas bemaße hat es wieder die Systemeinstellungen angenommen. Habe auch schon Programm geschlossen nach dem ich die Einstellungen getätigt hatte und auch schon kompletten Reboot durchgeführt. Der Button ""Beim Verlassen Dauervorgaben speichern"" ist aktiv. Woran kann das liegen? Kann ich die Voreinstellungen direkt in einer der Voreinstellungsdateien textlich ändern? Wenn ja in welcher? Danke Thomas

This is almost embarrassing for me to ask but is there a way to do variable offsets for surfaces in Wildfire 3.0?

In the past (WF2) there was a link in ProE to traceparts so we could retrieve different parts without any limit. After we made an upgrade to WF3 we see the link doesn't exist anymore. Did someone has a resolution?

There was a post some time ago with a poll of what version of pro engineer you are using. Does anyone know where this post went? I can not find it thru the search. Do we need to do another one? I don't know haw to setup a poll but would like to know how.

:angry: :angry: :angry: Hallo Leute, wie kann ich bitte den Hintergrund von schwarz auf weiß ändern? vielen dank suphi

I can not see the licences that are in use when typing "ptcstatus" in a command file. The computer is indicating that it is searching but then the screen is empty. Is there a repair file or can I download ptcstatus again? Regards Ferry

Hello..I`m looking for books that deal with creating and designing surfaces in ProE Wildfire 3.0Does anybody have a suggestion?. thank youAl.

Does anyone know how to wrap the text of a parameter displayed in a ProductView watermark? I am trying to display the <epmdoc_signature> property value. Sometimes, quite a few people sign, so there are multiple values. By default, all are displayed in a single line. If it goes off the edge of the page, I lose some of them.Alternately, is there a way to specify Value1, Value 2, etc?Regards,Bob

Hi, All... Please give me some detail information about "Autodesk ALIAS Studio".. Thanks in advance... Shailesh D. Shrivastava.

hi all, does anyone know how to change the shade quality, so that when you open a session it is automatically set to 10, the default setting is 3.