CAD

I am looking for help in basic MANUAL wire and cable routing for Creo 10. I am trying to self-teach but it’s become clear that I will need some level of formal direction. I am not working from any wire drawings or downloads that automatically populate the paths from an electrical engineered schematic etc... I need only to represent the 3D layout of the wire routes in the top-level assembly and transfer to a 2D drawing for visual representations used in Installation Drawings only. I have midlevel modeling, assembly and detailed drawing skills to aid in my learning for this. Currently my greatest challenges are orienting my CSYS so that my Z axis (Assuming Z is a default connection for a wire path) is positioned in line to accept my desired wire path orientation. There does not appear to be any way to edit the CSYS which seems to orient randomly when placed. If I do try to edit and click on a since created centerline, it will loop it from the original Z axis pick, (90 degrees off my

When I use create dimension in the drawing without checking out the CAD model, the dimension goes missing in the drawing after check-in. Why this is happening?

When user adds a drawing to his workspace, opens the drawing, opens the model from the drawing, hidden external sketches appear.  The same is not true if the model is opened directly (not thru the drawing).  Sketches are hidden just the way the model was saved.- Sketches are on a Hidden layer in both drawing and model- Config option 'autohide_external_sketch yes' has been added.  No change in function.- Once model is opened and sketches show, if you select one sketch 'show' then hide it again, they all will hide as in the original model. I have tried opening this in Creo without any config options and get the same results. For the user to create the screen shots for different publications, they must first fix the model before creating the screen shots. or clear the workspace, load the model and open the model directly. 

Is it possible to obtain the installer and license file on a PC that can connect to the Internet, store them on a storage medium such as a DVD, and then move them to an offline PC (a PC that cannot connect to the Internet) and install them there?If there is a way to prepare something on a PC that can connect to the Internet and install it on another offline PC, please let me know the details.(Are there any functional restrictions in that case?) -----------------------------------------------Translated text from Japanese to English using Google translateSubject: mathcadのインストールはオフラインで可能かBody:- インターネットにつなぐことができるPCでインストーラやライセンスファイルなどを取得しそれらをDVDなどの記憶媒体に格納し、オフラインのPC（インターネットにつなぐことのできないPC）へ移動しインストールすることは可能でしょうか。インターネットにつなぐことができるPCで何かしら準備をして、オフラインの別PCへインストールする手段があれば詳細をご教示ください。（その際、機能制限などはないでしょうか。）- By community moderation team.-----------------------------------------------

Is there a document that explains all of the trail file functionality in depth? I can only seem to find top level information but looking for something that actually describes the details of functions

I am trying to get a pressure-enthalpy diagram for methane by using Coolprop but I am constantly getting Pressure_out_of_range error. Does anyone know the solution?

Creo version 10.0.3.0Datum Plane is modeled through a sketched point and parallel to another plane. The sketched point moves to a different position after a dimension change and model regeneration. Plane does not update position after model is regenerated, and related features crash. After "redefine" is used to enter Datum Plane creation dialogue box, "OK" is selected without any change to feature definition.Plane then updates position as expected and failed features resolve by themselves.

*Using Creo 10 currently* The background on this is I have an assembly with a bunch of parts that are only slightly different in geometry and the material, finish, etc. are all the same. The general notes on the drawing will be the same too. So this is is essentially what I'm trying to do: I would love to create one annotation feature (possible in a notebook) that can be read by all of these parts to create their general notes on the drawing. That way, If I need to update the notes at any point, I can do it in one place (again, seems like something  a notebook could do but I've tried to no avail) and update with a regeneration instead of going into all of the text and updating individually.  Is this possible? Even so, would it be too much work on the front end to set up?

License not working after reintalling computer`s operating system from a backup. I am trying to load the license file and it is not working("Invalid Host", "the host ID doesn't match the hostID specified in the license file"). Also online I cannot make the license work(i get: The remote server returned an error(403)Forbidden).

Is there a way to write the spiral curve equation in a cylindrical coordinate system in  such a way that the pitch is zero in the beginning and the end so that the curve starts and ends tangent to the start and endplanes that are normal to the trajectory center axis?  

 hihow to change unit to g/cm3  

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0  1. When you click Save on 3D and 2D models, you can automatically execute the program of custom mapping keys;2. Is it possible to add some verification when saving? If the verification fails, it cannot be saved;3. Is it possible to customize and adjust the options under the "File" tab;Contact: Zhu Yunbo Teil: 15895986870, Email: 15895986870@163.comHere are the errors that I faced1. When you click Save on 3D and 2D models, you can automatically execute the program of custom mapping keys;2. Is it possible to add some verification when saving? If the verification fails, it cannot be saved;3. Is it possible to customize and adjust the options under the "File" tab;Contact: Zhu Yunbo Teil: 15895986870, Email: 15895986870@163.com----------------------------------------------------------------Translated text from Simplified Chinese to English using google translateSubject: 校验保存功能Body: 1、能够在3D和2D模型点击保存时，自动执行自定义映射键的程序； 2、

Hello, i am using creo 10 and when i try to regenerate and then save the drawing, the window says not responding.see attached error page. Br,sandeep c.

Hi Guys,I have one main assembly that has one drawing and also I include my sub-assembly and component drawing based on sheets. Can we convert it into individual drawings based on the 3D model name? Regards,Aj

there is no documentation on this.   i would like to see a number at the connector level adding up all the connection_count in the port level.  

Hi all I am having problems with PTC Mathcad Prime versions. I use the latest version, i.e. 10, but colleagues etc. use varying versions, for example 9, 8 and 7.  However, they do not have the option to upgrade to the latest version. When I send them the file saved with the latest version, they can't open it. What is the solution? The best would be a solution where I can save the file so that it can be opened in any version, because I don't always know which version the other party is using.

I am using Creo Parametric Release 8.0 and Datecode8.0.0.0Creo user is experiencing long delays opening up Creo files. Sometimes longer than 3-4 minutes. Mainly solid models. Sheetmetal models appear to be better.

Utilizing the same configuration files and settings: If I start Creo without the trail file being automatically run and run it manually it works perfectly.  Server Management - Without Trail File Ran Automatically  If I start Creo with the same trail file being run automatically the saved server is no longer shown. The trail file seems to run correctly as the second blank tab is opened successfully. Server Management - With Trail File Ran Automatically Not sure what is causing this. Trail file is very simple as it just opens a second blank tab currently.~ Activate `main_dlg_cur` `EMBED_BROWSER_SMARTAB_LAYOUT_buttons_lay_ph.pshNewPage_inside` 1~ Activate `main_dlg_cur` `EMBED_BROWSER_SMARTAB_LAYOUT_buttons_lay_ph.page_0` 1~ Trail `UI Desktop` `UI Desktop` `SmartTabs` \`selectButton main_dlg_cur@EMBED_BROWSER_SMARTAB_LAYOUT_buttons_lay page_0 0` The shortcut target is set to the following:"C:\<INSTALL_PATH>\Parametric\bin\parametric.exe" "C:\

Existe algum documento que descreva o que é perdido ao mudar do Creo Parametric para o Siemens NX? Um cliente de 20 anos deseja mudar, e precisamos de argumentos para neutralizar essa mudança. Alguém poderia me ajudar com um documento oficial da PTC ou algum comentário que possa ser usado em defesa?

Issue is that with each Creo+ update, the "Start in" setting is reset to the default.

Hi,

Hello, We recently changed the network in our organisation. The server holding licences for creo didn't change, it just change network. Although the server is up and we can ping it, people can't access their licenses. Here is the creo error message and the result of ptcstatus.bat on the user side.And here is the result of ptcstatus.bat on the server side :

Hi,How to solve for V2(t)?

I have a stencil that I'm adding to an assembly just to show it graphically and I want the weight of the part to be zero.  Is there a way to assign a weight to a part that has the mass parameter locked?

Hello Can someone please let me know if I can download Expert Moldbase Extension 16 now? PTC only has version 15 available for download. Thanks.   Translated by the Community Moderation using Google Translate.    Olá Alguém por favor pode me avisar se eu já posso baixar o Expert Moldbase Extension 16? PTC só tem a versão 15 disponível para download. Obrigado.