CAD

When I add an overlay sheet or view, at the beginning , seems to work. after the check-in, if you close and erase not display, when you open again the drawing that contain the Overlay, the result is some DATUM with large rectangle, and this result also in the publication of Windchill.Only if I open in my session the source drawing and after I regenerate the target drawing, the problem will solve.But taking in to account that after the check-in the cad worker will retrieve only the target drawing, so the problem will reflect after in windchill.   

 We are licensing Creo on the server side, but some of our client PCs are on Creo 7.0 and others are on Creo 4.0. We are going to renew the licenses.I am concerned that there will be authentication problems if I set up one and the same license on the server side, since each client has a different Creo version. Could you please let me know? Best Regards,  

I am using Mathcad 14 and have Mathcad work sheets from many years ago in which I used the function splin2, but it does not work now (error).  Bard AI search says the function has been "deprecated" in Mathcad 14, but the "the Mathcad Classic add-in" can add the splin2 function back into my Mathcad 14 program.    Can you help me find the Mathcad Classic add-in?                                                                                                      

It does not allow me to create a new account to be able to have the application for 30 days

HI Team, Background work we have done for this, collected all the views and filtered the flat view by the part model used in the view. retrieved solid from the view, from solid collected number of surface and no of edges using surface visit and contour visit.and set the view for surface recognition For ProDimensionAutoOrdinateCreate(). also given Proselection surface_array and edge selection through Program. but not able to achieve dimensions even after conditions are specified for the surfaces and edges.We are getting one error while executing ProDimensionAutoOrdinateCreate() this function all. The error message and code reference given in message and warning box.  Exception thrown at 0x00007FFAF8BE36F9 (rtlcoremt.dll) in xtop.exe: 0xC0000005: Access violation reading location 0x0000011D407BFFFC.If there is a handler for this exception, the program may be safely continued.Please find below the code referenceProSurface pSurface;ProDimension* dimensions;ProSelection *sel,

I was looking through an old newsreel and saw such a frame: a university teacher gives a task to a student.Mathcad cannot solve this equation. And can you?

Beware of using the "stack" function with mixed unit matrices containing zero terms without units. Prime seems to "leak" the units from another term to the unitless zero terms:  Given that Prime is fairly pedantic about using units  - even on zero terms- subsequent computations using 0.N instead of 0 will fall over. This can unwittingly happen when radians are used, and you expect the value to remain a pure ratio. The get around is to ensure radians are inserted at source - even though Prime strips them off in subsequent results: If you copy and paste this result, into another expression, the rad unit will get swapped out for another:  However, this is of no help if the zero value is not an angle e.g. a zero count value.   

Can someone recognize these types of charts and which software they were done from? Are these from Mathcad Prime or Matlab or any other software you may know of? Can these be done in Mathcad Prime 3 aswell?      

Hi Every one, My requirement is to create an irregular pattern of holes. I have 'X' and 'Y' dimensions of points where holes to be made and will create a family table of patterns.but, after creating table pattern the points are reversely plotted (-ve became positive and positive became -ve). I think it is taking relative position instead of absolute positions. I can reverse the signs to get the proper results but I have to use the exact values of 'X' and 'Y' dimensions. I have attached the snaps of the problem I am facing. please help.     

I am running CREO Parametric 7.0.4.0 on Windows 10.I would like to use the boolean cut function to match some mating geometry. I've watched a few videos on how its done and it seems rather simple.I was having issues so I created 2 cubes and a practice assembly, however when I try and select the geometry to be used as the cut, it will not let me select it. (view in My Videos) I do see a feedback message in the bottom left that states: "Reference cannot be uesd due to the scope setting of NONE for Environment."  I could not find an obvious setting in the config to make this adjustment to locally. Any ideas?

Hello - Sophos has gone rogue and is deleting trueSolid-x64.dllWe have the file whitelisted on the server, but all these clients have detached.Yes, I'm currently working with Sophos to address the client randomly detaching from EnpointCentral. However, I have 7 engineers without CREO and need a quick fix. Is there any way to run Creo 7.0.2.0  without trueSolid-x64.dll? (sophos is difficult to remove on remote clients as it requires booting to safe mode to disable tamper protection).for reference, the error Creo throws is and putting trueSolid-x64.dll back in play is immediately deleted by Sophos,which promptly pats itself on the back for doing such a good job.Thanks,Fred    

I am thinking of upgrading my Alien 17 R4 laptop  (intel(R) Core(TM) i7-7820Hk CPU  2.9GHz, 32GB RAM ). I would appreciate any thoughts, guidance or recent experience on selecting a  laptop/desktop PC  suitable for running parallel instances of Prime - where each instance is running a large numerically intensive programme.  Many thanks  GeoffD

Hi, guys!!! I'm very appreciate you for your product, it's genious, really. I've tried a lot of programs (such as WolframAlpha, Maxima, MathLab and etc.), but when I tried MathCad, I understood - i fell in love with it.But there are two really major flaws:1. I can't debug the program I wrote and it makes it difficult to find errors, I have to spend a lot more time looking for them. You have primitive programming language (in terms of implementation complexity), so I guess it shouldn't be hard to implement.2. I use your program with my laptop, and when I use draft page, it becomes very difficult, to navigate in horizontal directions, so I'm forced to drag the slider, which is not so fast and comfortable. So that's my second request - basically improve touchpad navigation, in every sense)Good luck with development and thanks again for your product!!!

I have used units but when writing the function to excel I am getting error. Please help 

When importing AP242 STEP files into Creo Parametric 8.0.4.0, some driving dimensions are converted to NOTES and lose all PMI parameter data.  I need all driving dimension to retain PMI parameter values (dimension value, tolerance value and tolerance type, etc).Any suggestions on why some are converted to Notes and how to ensure all dimensions retain PMI parameter values?    

Hi,   With the announcement of Creo+ (which is getting me really excited for the future of CAD and PTC taking the lead) I'm wondering, how do the 2 products relate to each other?   We are using Creo Parametric with Windchill at the moment. Will moving to Creo+ at some point eliminate the need for Windchill?  And will the files and its features be compatible / exchangeable with one another?   Happy to see your answers,   Jeroen        

Hello all,The explosion lines in the 2D figures do not correspond to the settings and not to the representations in the corresponding 3D figures. The explosion line based on the center line and its values are 4-1-1-1. What could be the reason for this? Thanks and best regardsRamon Bohne

Is it possible to define a coordinate/position, so that this point is automatically selected within a sketch using mapkey? My objective is to update a curve (which already works with mapkey) and that curve is used in a sketch to extrude a part. When updating the curve you have to select the new one to replace the reference:  To prevent the user from selecting something that should not be selected, I'd like to use the mapkey to select the right curve in the sketch.  I'm using Creo 7 Thanks in advance!   

Hello, namely it is about Math Cad 9. I bought and downloaded this file __pim_installmgr_mathcad_9__ Actually, double-clicking should start the installation. Unfortunately, the file is only unpacked and then nothing else happens? Now I don't know how to fix the problem and would be very grateful for help. Best regards Max -------------------------------- Translated the text from German to English using Google translate by Community Moderation team.Subject - Installlation Math Cad 9 Probleme Body: Hallo, und zwar geht es um Math Cad 9. Ich habe diese Datei gekauft und heruntergeladen __pim_installmgr_mathcad_9__ Eigentlich müsste damit per Doppelklick die Installation starten. Leider wird die Datei nur entpackt und dann tut sich nichts mehr? Nun weiß ich nicht wie ich das Problem beheben kann und wär über Hilfe sehr dankbar.   Beste Grüße Max--------------------------------      

How can I select Quilt F160 from the model tree? I can't select Feature 160 from the graphics window. Any alternate ways to select the desired quilts? Thanks!   

I'm trying to make a sheet metal part with some bent flanges, but the miter cut option in the "Flat" tool doesn't work on one of my corners, as shown in the attached image. Any idea why the left corner fails but the right corner works? Creo 8 and Creo 9.         

Dumb question, but what is the process for upgrading from V8 to v9?If i just run the exe will it do its thing automatically, or do i have to remove v8 first?thank you.   

We are currently on Creo 4 and Windchill (Intralink) 8.  If I do a ptcstatus.bat I see 15 Intralink 8 licenses available.  Unfortunately, we need about 25 until we get ourselves upgraded to Creo 8 or 10 and Windchill 12 later this year.  We have purchased numerous licenses of Windchill 12 but they're just sitting there, waiting for implementation.  It would be great if we could temporarily transfer those to Intralink 8 licenses for a short period of time. Is there something we could do now w/ PTC or are we stuck until we upgrade? Thanks.. 

Hello Team,please find the below image, How to edit the given locked parameter.     

Hi all,I have the situation that after creating and deleting a bundle I am left with new cable segments (one in each cable where the budle previously was), which leaves me with three segments per cable.The segmentation sometimes leads to unwanted effects when moving location points.The use case is to lengthen or shorten the bundle sleeve. This creates new segments each time.Is there a way to go back to the original state (one segment, or join segments into one?