Creo+ and Creo Parametric

I need to make some modifications in the drawing, but now sure how. Could someone help? 1 - This part inside the red circle it's appearing on both sides, but I need just one side, like in the second image. Besides that, I need the line to be dashed. How can I do that?  (how it's now) (how it's supposed to be) 2 - I need to show this part in the red circle, also with dashed line, that it's in the model but doesn't appear in the drawing. How can I do it?    

I am using Creo Parametric - Release 4.0 (connected) 4.0 M060New linestocks were created for Newberry CAD conversion. When I add a hole as a UDF (user defined feature), not only does it not add the hole feature to the bend table, it stops the bend table from being created at all. When initially setting up the hole UDF, it indicates that the files do not have the same units. I've tried to change units in the tube part/assembly, and change scale of the hole, but have not had any success.Example is 31350642"Chart Generation ERROR: 3010 = Pipe Hole Has Invalid Diameter"

Check out this video on Mechanism Dynamics from PTC Application Engineers! Presenters: Lino Tozzi (Technical Specialist, Fellow) and Tom Quaglia (Strategic Segment Specialist) To dive deeper into the subject, check out PTC University  

I am using Creo Parametric 2.0 F000Other than the help center, are there any other documents, such as PDFs, that show the basic operation and creation process?

I am using Creo Parametric 2.0 M020I am running the software on a Windows 10 HP laptop with video card Radeon Pro WX 3100, and the software is really slow - it takes me a long time to open a 6.8 MB STP file, and there is a lag when I turn the part. I do not do modeling on my laptop; I only view 3Ds.I previously had a Windows 7 lower grade laptop and can view parts this size no problem, but ever since I got this new laptop I have been having a hard time just viewing STP files.Do you know if there is a compatibility issue with my video card or any suggestion on how the program can run smoothly on my laptop? Let me know if you need more information on my laptop.

I am using Creo Parametric 2.0 M250the speed is very slowly ( 50-60s) when we create a new drawing or model by using Creo Parametric. it happend one month ago , it meaning it is working fine one month ago. please look into it . thanks a lot!

Hey There,  After saving a part to an .stl file, creo leaves the part with facet outlines. How do I get rid of them without closing the part and reopening?

Check out this video on Mfg Automation from PTC Application EngineersPresenters: Lee Goodwin (Technical Specialist, Principal) and Ryan Butcher (Technical Specialist, Fellow) 

We are in the early phases of model based enterprise. Our MBE template models have several built-in flat to screen notes. If we activate GD&T Advisor application it runs a "Unvalidated Annotations" check. The only way to preserve annotation is to choose Validate All". The second screen warns of a different tolerance standard and has Delete All or Don't Delete.   Even when choosing Don't Delete" GD&T Advisor deletes ALL model notes, including those that have nothing to do with dimensioning. Having an application strip out all of our MBE template annotations is clearly not useful.   We have the GDT_ENTERPRISE_SET.  Is there a config option to turn this behavior off? Documentation states that without the GDT_ENTERPRISE_SET there would be an ignore button. What am I missing here?    

So, the last time I played with this (quite a while ago, right before my spineless/nutless stalker trolled people here), there was a little distortion in the corners where the spring got smaller.  This iteration is more complex, with a lot more features, but then I'm trying to get a lot more complex shape and I managed to eliminate most of that distortion.  You can't get all of it out because, honestly, Creo isn't meant for or 100% capable of what I'm trying to get it to do.  No matter, I got as close to perfect as I think is possible and reasonable.   Of note:  Creo flat refused to let me use a boundary blend to wrap a curve onto, at least in my application.  Also problematic were trying to use C2 continuous rounds to wrap onto, Creo seemed to like a conic round much better and the result is basically the same.  There is no "wave" to this helix as you would get in trying to use a helical spiral around an axis, as you can see by the fact that the flat

Check out this video on Creo Mechanism Dynamics from PTC Application EngineersPresenters: Lino Tozzi(Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow)Original Date Presented: August 3, 2021To dive deeper into the subject, check out PTC University. 

I'm pretty sure I could do a symmetric revolve up to 359.9 degrees in previous versions of Creo.    Could someone let me know if that is true?    I am using Creo 8 right now and it's maxing out at 359.5.    

I'm starting with synchronous J-Link application. I'm able to link & launch the sample applications, but not able to debug. The J-Link documentation does not explain much about it. Even on web, I see posts suggesting about debug messages, but that it not very efficient way. Any recommendations on the IDE to use and how to attach the debugger for the same?

Hi all,   I am working on a 2D drawing where I am adding dimensions. (Creo 4.0). Some dimensions, I show using 'Show Model Annotations', and some dimensions I add manually. I now have 2 angular dimensions: one that I added myself, and another that I added using 'Show Model Annotations'. I noticed that I can change the dimension orientation (Inside Angle, Outside Angle, Supplementary Angle 1, ...) only of the dimension that I added manually. On the 'Show Model Annotations' created dimension, the 'Orientation' button is greyed out in the toolbar. Can this be changed, so I can change the orientation of the Annotated dimension also? Or is that fixed?   First screenshot shows the 60° angular dimension that I created myself, with the enabled 'orientation' button.   Second screenshot shows the 150° angular dimension with the orientation button greyed out.   2D Drawing  

Hi,   Anyone know of a Creo Parametric Config.pro setting that will allow Creo to display all file types when opening or when assembling a component in an assembly?Working in a Multi Cad environment and need to assemble other CAD system files to Creo assemblies.   Thanks, Don A

I have a created a large assembly of an industrial air compressor which contains every option we offer on the machine. These options are broken into option classes which are grouped in the model tree (see photo). Every option is part of a Simplified Rep I created called EMPTY and set to EXCLUDE.     If I expand each option class one at a time, select one option from each, and set it to MASTER REP to build a specific machine, can I save these MASTER REP options only as a standalone file that does not reference the original assembly in any way? I know I can Copy As External but that still references the original assembly. I know this was possible in earlier versions of Pro/E.  

Here is my case, Assmbly model "mode A" public features: Ⅰ、Ⅱ、Ⅲ ... And B use copy geometry  fucntion get the feature  Ⅰ; And C use copy geometry  fucntion get the feature  Ⅱ; ... etc.   Its worked well, but when new project coming, The only difference is we need change the featureⅠ to  feature α, others need to keep same. But when I try to save as the "mode A " to "mode AA", Neither core or Windchill alllowed me to re-use model C or others. They force me to make new parts at all.   For drawings and BOM, maybe its ok, but  this is a disaster for the warehousing system. I am new for croe and windchill, So I am not sure I used the right way to do the top down design.   Do you have any sugestion, thank you!

Check out this video on Creo Cabling/HMX from PTC Application Engineers!Presenters:  Adam Manfredonia (Presales Technical Specialist, Principal), Lino Tozzi (Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow) To dive deeper into the subject, check out PTC University.

Check out this video on Creo Tolerance & GD&T from Sigmetrix and PTC Application Engineers!Presenters:  Raphael Nascimento (Sigmetrix), Lino Tozzi (Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow) To dive deeper into the subject, check out PTC University. 

Check out this video on Additive Manufacturing from PTC Application Engineers!Presenters:  Emily Pinto (Virtual Presales Technical Specialist) Lino Tozzi (Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow) To dive deeper into the subject, check out PTC University.

Check out this video on Creo Advanced Assembly from PTC Application Engineers!Presenters:  Lino Tozzi (Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow) To dive deeper into the subject, check out PTC University.

Check out this video on Flexible Modeling from PTC Application Engineers!Presenters:  Lino Tozzi (Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow) To dive deeper into the subject, check out PTC University. 

one of my tasks is to build assemblies of various customer orders. we have a big folder with many subassemblies in and I am given a list in excel of which sub-assemblies are needed for the specific order, at the moment I am going through and manually assembling each one into the main assembly. so I was wondering if anyone knew if it was possible to have creo automatically do it, taking the list from excel. any help would be much appreciated.  

Is it possible to assemble parts in a simplified rep. as inactive? I'm creating an assembly that has thousands of parts and they all get assembled at default location. Right now I have to assemble each part and then after I've done a handful I go into the simp. rep. options and change them to inactive. I'd like to assemble each part as inactive so I can skip the extra step. Anybody know if this is possible?

Hi all,   In the drawing module, I have a 2D drawing of a model. With 'Show Model Annotations' I had shown all the hole axis/axes in multiple views. Now I changed the 'Visible Area' of a view from 'Full View' to 'Broken View'. Now I am left with many axes that are still visible. (see screenshot). I want to remove the axes that are positioned outside of the model (red ellipse in the screenshot). I would like to remove/erase the axes that I don't need by selecting them all at once by dragging a rectangle over them to select. But this does not seem possible (or I have not found a way..).   I simply cannot get any of the axis checkboxes back in the 'Show Model Annotations' window. Which ever view I select. The only way to select the axis to erase them, seems to be to individually select them on the drawing! Or, to select them (also individually) in the Drawing Tree ... Is there any way to 'mass select' all the axes to erase them? Ideally by dragging a rectangle over them....? &nb