IoT & Connectivity

Hi,I have created an application but whenever i use the url of the mashup in a web browser. i am prompted to login to thingworx composer. This makes it hard from business point of view as i dont want to share the composer credentials. Is there a way to disable the login prompt. Tried Methods: We have a customized login page in our application built on thingworx.Using an organisation doesn’t grant me the option to edit or customize the login screen.   Queries 1.Is there a way to customize the organisation login page?2.If not is there anything that I can do to remove composer login prompt from appearing when users access my application url.3.In case I use the application key (not recommended method). I can only add one user and not a group and he will have all access over the composer. Which i don’t want.   Please provide your suggestions on the above.   Thanks, Kishore  

Hi,     I want to apply StateDefinition only for 1 Column. So, I applied StateDefinition to a particular Column and it's working fine. But, when ever I'm hover over on the table It's showing the default one. Can anyone suggest how to apply StateDefinition for RowHoverStyle also?

Hi All,   I had create my project in a older Thingworx version, it works fine. I can create the query. when i migrate to a New version 8.4.2 ? I am not able to create a query. the arrow seem different?? Can anyone guide me? Not sure if there is a change in step to create query?  Please do direct me to any tutorial or document which show how to do it. I will try it out.   I hope to know if anyone know how to snapshot a runtime mashup into an image, if there any extension that can snapshot a mashup and save it in the File Repository?   Hope someone can advice me!   Thank you!  Newbie Kek

Hi, I am using textbox validator widget and when the input is invalid I had given a red colour style definition to the textbox validator property. But when I change the style definition to some other colour, the next time it still appears red (the colour I assigned first). I tried with several style definition but the invalid style still appears the same. How can I resolve this?   Thanks, Shalini V.

Because I don't have any about learning's know-how, so I have some about about analytics name.   I don't understand what is "Information Gain" 、"Avg. Goal" 、 "Diff vs Avg" 、 "% Diff vs Avg" and "# of records"  

Hello,   I am encounring errors when trying to run analysis based on Events, i've published my model and when i test it i get results as i should (image 1) but when i map the data and enable the event i keep getting this error : Throwable Error Executing Event Handler for event Type.Thing:Entity.TW.AnalysisServices.AnalyticsServer.AnalyticsServerConnector:Event.JobResultsAvailable : nul on the application Log and results are returned too the mapped Data.   If someon can provide some help in the matter that would be great.   Thenk you.

Hi @unknown , Is there any solution to display or view excel file and word document with Thingworx?   Thanks & Regards, Sathishkumar C.

Im using auto refreshal for Navigation between screens. how can i implement pause functionality(button) in this usecase. and suggestions about timer. Thanks in advance!!

Hi,  For a header or footer in the layout widget, if mark "ShowExpandCollapseTabs" then the header/footer can be expanded or collapsed , and the remain area in the web page can be adjusted automatically.      But how to create multiple ExpandCollapseTabs  like the attached picture ?   The Folder Pannel cannot get this as it won't adjust the size of the remain area when expanding or collapsing.     Regards, Sean

I am using the default organization login functionality of Thingworx.  If the user successfully login then it redirects the master mashup. But, if I entered the login page mashup URL it's loading the login page again instead of redirecting to mashup how in a normal application.  Is it possible if the user is already authenticated then we can redirect to master mashup based user organization?

Hi,   I want to create an login page for my organization and login using username and password.   I have followed the instructions at http://support.ptc.com/cs/help/thingworx_hc/thingworx_6.5_hc/index.jspx?id=FormLoginPagesforOrganizations&action=show   I have been able to create a Login page but what username and password should I use for successful login?   The link above descibed as   #8.Type your Name and Password.   But I am not sure which username and password to enter.   Please Help.   Thanks, shreekant  

Hello All,     I am uploading one image and I am showing in the Image widget. In the same mashup I am showing some other content. Whatever I have uploaded image is coming as small image and is not showing clearly.      I am looking for any way to maintain the aspect ratio even the image get smaller and to show the image clearly.   Thank you in advance   Thanks, Vamsi

I am trying to set focus back to a Textbox after a service runs in a modal popup.  Tab sequence is set to 1, so it does put cursor in the Textbox when the mashup is loaded, but not after a service is run.  I have tried several things to no avail.   Any suggestions would be much appreciated.  

Hello all,   We have installed Thingworx Foundation 90 days trial in local environment. Now we need to extend trial period. Could any one help me with this ?   Regards, VR

We want to read data from CNC control units with kepware. How can we get a project file or support? Fanuc, Siemens, Mitsubishi and Mazak.

I would like to know if the Manufacturing App is capable of launching different types of mashups for different asset types, like cutting machines, forging machine, etc. I want to use “PTC.Factory.C_ProductionHistoricalData_8.4.1_01" as a starting point but have different flavors based on asset types. Thanks. 

Is there a way to display a unit (for example, cm, m3, KWh...etc ) on the Y-axis in the time series chart.Thanks in advance.

  Hello,   I am looking to send data from ESP8266 to Kepware [ OPC UA server].   Physical layout: Have an ESP8266 (say 192.168.1.100) with a DHT-11 temperature sensor connected. I can program ESP8266 with Arduino IDE environment. In the same network, I have a Server (say 192.168.1.110), with Kepware KepServer  on it. There is no physical wiring from ESP8266 to the Server.   IN this case, can someone point to some documentation on how to send the Temp values to Kepserver. I am aware of setting a channel on Kepware, creating tag etc. But need some guidance on how to program the ESP8266, and the workflow figured out.   Any documentation or hints would be great. NOTE: I am NOT looking to send data to ThingWorx DIRECTLY from ESP8266 over MQTT or REST.   Regards,    

I tried to access logs from a new user it showed nothing only red line has been shown please help me to resolve this issue

Hi, Is it possible to make the text box widget rounded corners in ThingWorx 8.2?   Thanks, Shalini V.

Hi @PaiChung ,   Per this topic: Is it possible to create a stacked bar graph using a proportional chart widget or do we need to install the following custom chart widget ?   https://marketplace.ptc.com/apps/193203/custom-chart-widgets-v301#!overview   Regards, Mandar

Is there a way to determine how much RAM an Infotable property is using? Preferably, a method that wouldn't involve setting the infotable, checking the total system memory usage, and then deleting the infotable and doing the subtraction.

Hello @done11,   Is this code for drawing polylines in GoogleMaps Widget?

Hi, Following to the same query,   In my case, fieldName baseType is Infotable and a datashape for the respective infotable needs to be added. How can I solve it?     Regards,   Janakiraman p

I have a similar requirement to orient the image from 0-359 deg. It would be glad if you could share the code for developing the extension along with the option to change the image used. Thanks in advance Sarma