Networking and More

Have a great weekend. Time to tackle those project that have been waiting for you all winter long....     What do you call someone who likes to add numbers when the weather is warm?A summer.   ...or an engineer.

Enjoy the weekend. Celebrate the one that brought you into the world. Give her a hug if you can or remember her fondly. Happy Mother's day on Sunday to all the mothers out there.       Seven has the word even in it, which is odd.

Hi, Everyone,   @AndrewK @olivierlp and @Jaime_Lee   are excited to meet some community members in person!   We will be hanging out in the sponsorship Area with our friends at PTC/USER. It is going to be a great week!    

I already registered for the conference but at the time the registration for the training sessions was not open yet.  I went there today to see if it was open but it's still not.  The notes say early 2023 but here we are...

Happy Liveworx to those attending next week. I am looking forward to leaving, tomorrow at dawn, for Udine for the largest gathering in the world (an estimated 350,000 to 400,000 people) of an association of arms (in our case those who served in the Alpine troops).   https://www.adunatalpini.it/   https://it.wikipedia.org/wiki/Adunata_nazionale_degli_alpini    

See the Top Community Engagers and the Top Noteworthy posts for the month of April..   Top April 2023 Community Engagers:    @Werner_E, @HelesicPetr, @avillanueva, @MartinHanak, @tbraxton, @terryhendicott, @jensc, @ValeryOchkov, @VladimirN, @Hariharasuthan, @LucMeekes, @StephenW, @ttokoro, @Chris3, @CornelBejan, @jbailey, @Velkumar, @-MFra-, @BenLoosli, @kdirth, @kdirth   MOST NOTEWORTHY POSTS   Below are some of the top engaging or most viewed PTC Community topic threads for April 2023!  See if your community username made this list! Or, read more about a topic that interests you!   1. Creo: DH_10606961 asked about Surface Extrude Not Visible - CREO Parametric 7.0.4.0. Great contributions by @tbraxton , @BHOoi and @kdirth. https://community.ptc.com/t5/3D-Part-Assembly-Design/Surface-Extrude-Not-Visible-CREO-Parametric-7-0-4-0/m-p/870428#M128801   2. Creo:  RV_8071958 received an accepte

Did you know that we have a special group of community members called PTC Community Champions?   A Champion is a PTC Community Member that has shown a track record of providing helpful advice and is a regular positive contributor to the community.   A Champion is selected by the PTC Community Management and Moderator Team and can  also nominated by a jury of their peers!  If you are interested in being a Community Champion (and you are an active, positive community contributor--lots of replies and accepted solutions) in 2024, take notice of who is a champion designated by a trophy next to their names and ask them to nominate you 😉  Tell them @Jaime_Lee asked you to reach out to them 🙂   You can read more details about the PTC Community Champion Program here   We wanted to take a moment to recognize our latest additions to the PTC Community Champion team for 2023! Thank you for all your great contributions! Looking forward to seeing more in 2023. &nb

I think softwares should include inverse passwords, especially for Creo users who always have their cap locks on.....   example of password: ThisIsThePW123456!   software also excepts: tHISiStHEpw123456!   Do you agree?

Leaving in a few hours for my son's out of town graduation. Have a terrific weekend everyone.   Think Spring!!!    

Our Research & Innovation team at PTC is conducting a study on productivity and quality analysis using insights from work instruction execution in the manufacturing industry. We have a new solution design to help our customers optimize their work instructions and are seeking experienced professionals like you for a 30-minute interview to provide feedback on our new solution design. We're looking for production supervisors, continuous improvement team members, or manufacturing engineers experienced with work instructions or operations optimization. Your insights will help us refine our design to better meet industry needs. If interested, click the link below to provide your contact information and availability: >> Click here to register << Feel free to share this invitation with colleagues who may be interested. We appreciate your contribution to our research and look forward to hearing from you! Best regards,Tadeusz WitczakResearch & Innovat

May the 4th be with you!!!

Have a great weekend. Starting Monday we will be over 1/3rd done with the year already. Make the most of the rest of the year.     My boss came to me at lunch. “Where in the world have you been? I’ve been trying to find you all morning!”   I shrugged and said: “Good employees are hard to find.”

We are in the process of hiring a summer intern who doesn't know Creo. Do you have any thoughts, suggestions, methods you would like to share are teaching someone the basics of Creo?  

Hello,I'm very confuse, but I can't find questions and answers I've posted.is it possible to find all of them and how ?Thanks        

Have a terrific weekend. Be blessed. Spend some time with the ones you love.         This is more for those who cook where they use Celsius (248 degrees Fahrenheit).

Have a terrific weekend. I had a blessed time away with family last week. Hopefully you were able to do the same. Going to be nice for the next couple of days before winter gives us a brief spurt.     Arguing with my wife is like reading a sales agreement.     Eventually, you just ignore everything. Skip to the end, and click on, “I agree”  

See the Top Community Engagers and the Top Noteworthy posts for the month of March.   Top March 2023 Community Engagers:  @WernerE @HelesicPetr @MartinHanak @tbraxton @avillanueva @Constantine @jensc @VladimirN @StephenW @ttokoro @LucMeekes @d_graham @kdirth @Eike_Hauptmann @Patriot_1776 @BenLoosli @abrinks @SweetPeasHub @terryhendicott @Sathishkumar_C    MOST NOTEWORTHY POSTS   Below are some of the top engaging or most viewed PTC Community topic threads for March 2023!  See if your community username made this list! Or, read more about a topic that interests you!   1. Creo: @JA_1434743 asked about Working with more sessions in Creo8. Great contributions by @MartinHanak, @StephenW, @RandyJones. https://community.ptc.com/t5/3D-Part-Assembly-Design/Working-with-more-sessions-in-Creo8/m-p/865652#M128537   2. Creo:&n

Has anyone else noted that the start up page that shows the "evolution of the phone" has an error - at least it looks like an error.   The first phone is supposed to be an old fashion receiver for the old wall box phone or maybe one of the first table stand phones.     If I am perceiving correctly, this phone should have a straight wire and not a curly-que type wire. Have a great morning and a terrific week. 

Have a great weekend. I will be off the end of next week so there may not be a post next Friday. Spend some time with family on Easter. "He is not here"!   Since tomorrow is April Fool's Day.         From the internet.... Back in the mid 80s, we started to get our first personal computers. Prior to then, everything was on the mainframe computer. You may remember in the early days of PCs there were lots of add-ons, one of these was an 'anti glare' screen. Well my co-worked wanted one of these, it was the means to a great prank. I had figured how to print white characters on a totally black background, so I printed……….. C:> If you are old enough, you recognize this prompt after the computer booted to DOS. I then placed the all black and white text printout BEHIND the anti-glare screen. To make a long story short, it was close to an hour before the victim realized that his computer was actually on and responding, all he ever saw on the screen was C:> &n

It's spring!!!! Although they are talking freezing rain tomorrow. At least it's light after I get out of work.   Today will be a 2-part puzzle-riddle:   You have a three-gallon pail, a five-gallon pail & a stream of water. How would you make exactly four gallons?

Be blessed today. Celebrate with your Irish Friends. You may find it interesting to learn that St. Patrick was the patron saint of engineering.   What happens when you call a leprechaun short? He gets O'ffended.   What's the leprechaun community's answer to Comic-Con? Lepre-Con.   What kind of spells do leprechauns use? Lucky Charms!   Where do leprechauns live? In lepre-condos.   https://ameshistory.org/tribunearchives/engineers-celebrate-st-patricks-day    

3 . 1 4 1 5 9 2 6 5 3 5 8 9 7 9 3 2 3 8 4 6 2 6 4 3 3 8 3 2 7 9 5 0 2 8 8 4 1 9 7 1 6 9 3 9 9 3 7 5 1 0 5 8 2 0 9 7 4 9 4 4 5 9 2 3 0 7 8 1 6 4 0 6 2 8 6 2 0 8 9 9 8 6 2 8 0 3 4 8 2 5 3 4 2 1 1 7 0 6 7 9

First day of Spring is just a week away!   I already lost power once this morning.  But, for those that don't get to experience the white, fluffy stuff....enjoy these photos!  The beauty of it is still amazing...even though we are getting tired of shoveling out 🙂  

I was reading an "awareness days calendar" online recently looking to see besides Women's History Month what other delightful special events or recognition days were listed for March.  Did you know that besides March being National Caffeine Awareness Month  (Bring on the coffee!!), it is also Umbrella Month (probably to remind us in the Northeast USA about April Showers coming next month...it really does pour!)  It is also  International Listening Awareness Month and National Reading Month.....what a better time to highlight our moderators who are busy reading every post that comes into the PTC Community!  We have had numerous Technical Support employees help out in this role (whom we have truly appreciated), and now we have three permanent moderators!   Meet the Moderators of the PTC Community!  In order of tenure here at PTC,    @vnamboodheri   @anursingh      Tenure at PTC:  11 Years Role:  T

Big dose of winter last night - 7-8" of fresh heavy slushy snow. Everything looks beautiful, like giant white pipe cleaners.     Never trust an atom, they make up everything.   I got a lot of the engineering questions in my exam wrong because I used the wrong pencil. I guess it wasn't 2B.   Why didn't Anakin Skywalker become an engineer? He couldn't get a Master's degree.