PTC Education

1) I drew 6 sequences using Creo Illustrator, saved them in PVZ format, and then extracted PVI files from it to open in Thingworx Studio.In Thingworx, the first two sequences are well played but the others are not played at all.Can it be resulted from any file size limit?2) I attached a Thing mark on a curved surface of the stuff which I worked on.The Thingworx View app on my smartphone rarely succeeded in recognizing the Thing mark.I guess it is because a Thing mark contacts only with a single tiny point on the curved surface of the modeling.Is it impossible to place a Thing mark on a curved surface?3) I applied multiple concatenated fade-in and fade-out effects as drawing a sequence in Creo Illustrate.When playing the sequence, however, the effects are not rendered except the last one.Is this normal?4) I used some symbol objects such as arrows in Creo.But I cannot see any of them in Thingworx Studio.Is this normal?5) It takes too long time to download a modeling in Thingworx View.My

Hi, i've been using Creo 3.0 Student Version in my laptop and in my College's pc. I used to learn CAM in my college's pc, but today i can't even create the manufacturing file. Is there any extension that i have to download? thanks in advance

I use Creo 2.0 Students Edition to learn it and I'd like to know if the auxiliary applications and J-Link are available in the Student Edition or only in the professional editions?Currently the Auxiliary Applications button is disabled.

I've installed the student version of Creo Parametric 3.0 M110 and the software won't even open when I try to open it. I'll click on the icon and literally nothing will happen, I've tried reinstalling it, running as administrator, and nothing will work. HELP!

‌

Instructions on how to access the Thingworx Developer Trial edition from From the Thingworx Developer PortalFor further instructions or question please use the Academic Community Site or write to us at IOT-AcademicJoin@ptc.com

I purchased creo 3.0 premium student version and the install manager will only let me install creo 4.0.  That's fine except the license only works for creo 3.0.  I have emailed ptc academic support 3 times since feb 1st.  I have received nothing.  I just want one of them to work.

I have made academic account (and received the confirmation email) in order to download PTC Creo. But when I try to log in my account to download, it says such a usename doesn't exist! Please advise.

How to Install PTC Creo 2.0

I'm attempting to merge a series of parts in an assembly.I have assembled all the .prt in the .asm and all parts are fully constrained.I have then assembled a blank .prt into the assembly. I then follow the procedure: Component dropdown > Component operations > Merge > Blank .prt in model tree > Ok > Parts to be merged in model tree > Done.The blank .prt which I have attempted to merge the existing parts into then fails to regenerate.I have checked that all relevant files are using the same units from File > Prepare > Model Properties.What should I do to resolve the problem?Thanks.

I keep getting an anomalous error message when trying to complete a Pin Connection.  Firstly I am working in a Simplified rep with just the parts I need in the rep. I set the axis constraints and they seem OK, I set the Translation constraints and they also seem to be Ok. In the Sim Rep I get connection complete as you would expect.  I then open the Master Rep and the same connection here gives a message "Failed to satisfy motion axis settings"  I do not understand what is going on, can anyone shed some light on the situation?

hello, i have a problem to anote the cota for this step piece, who can i put the measurement or enable this option?

HTTP Status 500 -type Exception reportmessagedescription The server encountered an internal error that prevented it from fulfilling this request.exceptionjava.lang.IllegalStateException com.thingworx.system.ThingWorxServer.isHA(ThingWorxServer.java:794) com.thingworx.system.ThingWorxServer.isLeader(ThingWorxServer.java:813) com.thingworx.security.filter.ProhibitIfNotLeaderFilter.isProhibited(ProhibitIfNotLeaderFilter.java:44) com.thingworx.security.filter.ProhibitIfNotLeaderFilter.doFilter(ProhibitIfNotLeaderFilter.java:118) com.thingworx.security.filter.HttpResponseHeadersFilter.doFilter(HttpResponseHeadersFilter.java:52) note The full stack trace of the root cause is available in the Apache Tomcat/8.0.41 logs.Apache Tomcat/8.0.41I am trying to upload thingworx.war file in tomcat i am getting above error.Here i am providing Log files for reference.ApplicationLog.Log=====================================2017-03-03 13:37:37.417+0530 [L: INFO] [O: c.t.s.ThingWorxBootstrapper] [I: ] [U: Su

Hi. I have a structure which I'm trying to perform a linear static analysis in Simulate on. The structure is a series of rectangular frames with a sub-series of diagonal members. When I applied a transverse out-of-plane load, I found that the diagonal members were not actually "connected" with the rectangular frame, even though in the .asm the diagonal members actually intersect the rectangular frame. How can I resolve this issue?For info: The assembly is formed with 1) the rectangular frame 2a) a single diagonal member running at an angle 2b) a pattern repetition to form the other diagonal members running at the angle 3a) a single diagonal member running at the other angle 3b) a pattern repetition to form the other diagonal members running at the other angleMany thanks.Message was edited by: Ryan Ng

Hi! I am trying to complete revolve feature from the wheel.ptr exercise (PTC academic program, Module 5, Page 9) When I accept the sketch, software shows this message "All entities should be on the same side of the axes revolution". Can somebody help me? Do you know what is the cause of this message? If have drawed the arc and the line just like the instructions. Thank you in advance.

I ran setup-schools.exe, entered my PTC account information, then it stops for some seconds with the message "Please wait while we retrieve your license" and then it shows no products, and the window is marked as "Not Responding" by Windows.

I have an assembly of several parts and want to split some of the parts and then delete them. Referring to the attached figure, I have several parts which go past a rectangular frame which I've defined. Is there any way I can "delete/trim" these excess parts?Thanks

I am having a compatibility issue with the recent update. Seems like my student edition is not being updated to the latest version. Is there going to be an update available for the student license soon?

HI,I have seen through all the discussions posted here,but seems even after setting up the SSL on tomcat i get same error.I used both ws (http - port 8087) and wss (https - port 8443), seems in both cases i get below error, i even checked the websockets echo request, i get proper response and also disabled the firewall on my ThingWorx VM and on Raspberry PI. but no luck.I have JDK 8 on Raspberry PI and also in my host system.Can some one help me on this please.Log as below:for http URL:01:23:55.552 [com.ptcmanaged.tempthing.Main.main()] DEBUG c.p.tempthing.BaseEdgeServer - EDGE SERVER STARTING....01:23:55.608 [com.ptcmanaged.tempthing.Main.main()] INFO  c.t.c.c.p.ClientMessageProcessor - Created new ClientMessageProcessor [minPoolSize: 4, maxPoolSize: 10, maxThreadLife: 10000, maxQueueSize: 1000]01:23:55.637 [com.ptcmanaged.tempthing.Main.main()] DEBUG com.ptcmanaged.tempthing.Main - Connecting to ws://192.168.29.163:8087/Thingworx/WS using key 7d3de718-dfcf-4e26-b8d5-9f97b0ba72bd

I have been update my NVIDIA GEFORCE but when I open a simple piece or I do a sketch, I cant do it because it spend a lot of time. what I can do for solve this problem.Thanks for your time.

I've update the program from M070 to M110 and now I can't open the standard parts that I downloaded from PARTCommunity (Cadenas) because these are made with a commercial version. I made a big project using some standard parts and now I can't open it.

a

what is mean by wizard in relation with windchill..?

Can you please provide me the LEGO EV3 mindstorms kit Library   I want the latest library because in my robotic model I have to use that parts which are not available in the old existing inventory of LEGO provided on: Software | PTC at the end of the page in the file > 2015 FTC Tetrix Robot Kit of Parts, after downloading that it has a LEGO inventory also(the old one).

So I used to have creo 2.0 downloaded on my desktop. However, I uninstalled it so that I could upgrade to creo 3.0 but every time I put my info into the student verification nothing happens other than the page refreshing. I've looked through my email thoroughly and I can assure you I did not get an email. So not only can I not download 3.0, but I don't even have 2.0 to use anymore. Any ideas of how I can solve this?